How to configure HTTPS in a dev environment
I'm working on an operating system RedHat running Jboss 5.1 and ATG 10.0.3 on a virtual machine.I have a web service I need to integrate and requires an https connection.
So my thinking here was to go on the road to a self signed cert. Now, I followed the instructions found here: https://community.jboss.org/wiki/GeneratingSelfSignedCertificateWithKeytool and I'm able to get to the web service, but now there are parts of the site that I can't access.
So I followed what I found here: http://docs.oracle.com/cd/E26180_01/Service.94/ATGServiceInstallGuide/html/s0809configuringjbossssl01.html
What I see on the site is a page of data transfer interrupted.
So, what I'm looking for here, is how to do – running on my local computer - use SSL properly and ATG so that the site navigate properly in and out of http/https.
Make sure you secure your ATG application pages make use of ProtocolChange droplets and ProtocolChange drop enabled property is true for easy transition between secure and secure protocol. You can learn more about ProtocolChange droplets in the annex of beans of servlet documentation ATG ATG Page Developer's Guide. Alternatively, you can consult these resources:
http://docs.Oracle.com/CD/E23507_01/platform.20073/ATGInstallGuide/HTML/s0514enablingtheprotocolchangeservlet01.html
http://betweengo.com/2010/11/10/turning-on-secure-for-ATG-applications
http://betweengo.com/2011/02/16/configuring-JBoss-for-HTTPS
Tags: Oracle Applications
Similar Questions
-
How to configure https in tomcat (BPSS SDK)
Hello guys...
I'm new in this configuration of tomcat and try to try and push SDK.
I followed the http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/Step-by-step-guide-for-the-PushSD... using windows7.
and
http://www.ITworld.com/development/80705/how-enable-HTTPS-Tomcat
but not able to do the work of https://localhost:443.
Please someone help...
Thank you very much...
Thank you very much, Massimo,
After I check, I found that the ssl certificate is not done yet,
so I followed http://techtracer.com/2007/09/12/setting-up-ssl-on-tomcat-in-3-easy-steps/
and now I can access https and https://localhost/sample-push-initiator
Now I can try to play with this next step to push.
Thanks... a lot and rellay appriciate your support.
Rudy
-
Hallo,
on GlassFish 3.1.2 I have deployed my ADF Essentials application.
Now I configure GlassFish server to run my application using HTTPS/SSL.
I would like to install the certificate MyDomainCert.crt, Intermediate.cert and MyDomainPrivateKey.crt files and configure GlassFish.
Could you kindly advice me a clear and not to hard document that describes how to configure the application server?
Thank you very much
Federico
Finally, I reached the goal
These links also helped me:
https://javadude.WordPress.com/2013/03/22/GlassFish-v3-1-2-and-SSL/
In addition, I would say to use the free program "KeyStore Explorer" (key - homepage file Explorer) to easily import the certificates and private key in the keystore of Java.
Ciao,.
Federico
-
How to configure a secure https payment page?
How to configure a secure https payment page?
Hello Gregfitzmiami,
This part is done on your hosting server. Please see the links below which explains more in this regard.
https://support.Microsoft.com/en-us/KB/324069
How to get HTTPS: Configure SSL on your website - Expert Guides
Kind regards
Vivek
-
How to configure both HTTP listening ports?
Hello
We have two applications is SALES and other is DSS, both are running on the same form and report server, by using the URL below:
http://hostname.domain .com:7777/Forms/frmservlet?config=Sales
http:// hostname.domain.com : 7777/forms/frmservlet? config = dss
SALE application accessed from inside the local domain, and
DSS access from outside the area.
So, we put this port 7777 # as open on the firewall for users the and remote, this parameter
DSS users also have to display the login screen by using the URL: http://hostname.domain.com:7777/forms/frmservlet?config=sales
Problem is we want to configure a different port # inseated 7777, and this port will have access only from the Interior of the field.
So, how we can configure HTTP two ports on the forms and server 10g?
OR
Is their any solution to ensure the envoirnment?
Concerning
Post edited by: 991464
991464 ha scritto:
How can we configure both HTTP ports on the forms and server 10g?
In the httpd.conf file , add a line like
Listen 7780
7780 with your change. Restart the HTTP server.
-
How to deploy the catalog from dev to test the environment?
Hi experts,
I want to know how to deploy the catalog of the dev environment to test the environment? I know it's a simple question, but please spare a minute to answer me...Dear friend,
I assume you are using 11g. Browse to the location OBIEE_home/Forum/Instace1/bi_foundation/OracleBIPresentationServicesComponent/coreapplication_obips1/catalog/your_webcat_name,
Copy the your_webcat_name folder and paste it into your test server.
Movement is done.
for 10g location is different.
Kind regards
Bachelot -
How to move Oracle APPS 12 configuration data to the new environment of production of 12 APPS
Dear all
I need to know, how we can move from Oracle APPS 12 configuration data to the new environment of production of 12 APPS? What is the safe and easy way, we do not want to make the new facility of 12 APPS and reinstalling things...
see you soonHello
The scenario above is correct and should work fine. Make sure that the central source and instances of the target are the same patch upgraded.
Kind regards
Hussein -
How to configure firefox to run as a single instance, so that all external links open within my existing window rather than opening another window?
Sorry, there is no setting for what is built into Firefox.
https://addons.Mozilla.org/en-us/Firefox/addon/tab-utilities/
In the utilities tab > Options > links there is a preference to enable single window mode. -
How to configure HP ENVY 700 - 210xt to install the graphics card EVGA 650 TI boost.
Can someone tell me how to install the graphics card EVGA 650 TI boost in the
HP ENVY 700-210xt
Product number: E9G99AV
I replaced the power supply with Corsair RM 650 watt power supply that works very well. Now, I want to go to the graphics card EVGA 650 TI boost. Except, I can't get the driver to load with period of installed equipment. When I put the card into the PCI 16 x slot the computer starts with a blank screen. I pass the DVI video port old computer and the new port card white screen of same at startup. If I turn the PCIe port disabled in BIOS, it starts with the embedded video, but same thing impossible to load drivers that are not able to locate the new video card hardware. Makes me crazy! I don't know that I don't know how to configure the Bios correctly or something. Can anyone help?
Hello:
Please see my response to your other post on the link below.
-
Satellite A300-1J1 - how activate/configure hotstart?
Does anyone know how to configure/enable hotstart it please?
If anyone can help I would really appreciate it.
Hello!
What model of operating system and laptop computer, you have exactly?
It is perhaps useful to you:
http://www.Microsoft.com/whdc/system/platform/firmware/HotStart.mspxGood bye
-
How to configure the LDAP connector in windows server 2012 R2 Active Directory?
How to configure the LDAP connector in windows server 2012 R2 Active Directory?
Hello
Please post your question in Server TechNet Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
How to configure two relationship of controller (same subnet) area of restraint
I have two domain controller for the forest of deference (windows 2008 r2 (64-bit) serer how can allows users in one domain to be authenticated by a domain controller in the other domain access resources (Eg: A1 domain can access resources in domain A2 using user name and password of user A1 domain controller account) how can configure the settings of this.)
Hello
It is not a Community Forum for this question.
You should ask in the TechNet forums
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
no doubt the general Forum.
Don
-
How to configure my grandchild as a user on my computer?
How to configure my grandchild as a user on my computer?
Hello
What version of the operating system is installed on your computer?
What version of the operating system Windows am I running?
http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
You can follow the procedure in the article to create a new user account.
Create a user account
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
See also:
What is an administrator account?
http://Windows.Microsoft.com/en-us/Windows7/what-is-an-administrator-account
What is a standard user account?
http://Windows.Microsoft.com/en-us/Windows7/what-is-a-standard-user-account -
I can't find out how to configure my joy (attack3) stick to play Flight Simulator. I don't want to use the keyboard on my computer to steal the game... Where can I find the instructions on how to configure and use the joystick?
Hello
1. what happens when you connect the joy stick?
2. do you get an error message?
3. what version of Windows are you using?
Perform the steps mentioned below and check if that helps:
Step 1:
Flight Simulator x: using a gamepad
http://www.Microsoft.com/en-US/Download/details.aspx?ID=16624
Step 2:
Usually, vista Windows 7 will find and automatically install the necessary drivers when you plug your game controller into your computer.(a) connect the joystick to the USB port via the adapter.
(b) see if it is detected.
(c) Windows should recognize the new hardware and set in place to work properly.
If this isn't the case, install the relevant drivers for gamepad for the manufacturers Web site.
Step 3:
I suggest the following steps and check for the device.
1. in Control Panel, open game controllers. To do this, use one of the following methods:
a. click Start, typejoy.cpl in the Search box and press ENTER.
2. click on your game controller, and then click Properties.
3. on the Test tab, test the game controller to verify functionality.
Here is the link:
http://support.Microsoft.com/kb/831361
I hope this helps.
-
How to configure it so I have to put a password before signing?
Original title: password computer
I just bought my computer and when I go it does not ask for a password. How to configure it so I have to put a password before signing?
HelloWhat operating system are you using on your computer?Please follow the instructions from the link below and check if they will help you.
Protect your computer with a password: http://windows.microsoft.com/en-US/windows7/Protect-your-computer-with-a-password
Maybe you are looking for
-
Can I restore without losing data?
I don't have my Iphone saved on my computer. I need to get out of a boot loop, but I can't update. Is it possible to restore without losing any of my photos, music, etc.?
-
Plugins disable (or reactivate if disabled,.)
While trying to find what add-on is hammering my CPU, I found another strange behavior while trying to disable plugins one by one: with some plugins (specifically, Foxit Reader, Flash and Silverlight), the next time that I restart Firefox, they are a
-
Satellite A505-S6025: Win 7 64 bit - driver ACPI\TOS1901 fails
I have this problem and my phone freeze.If anyone knows what it is and how I can solve this problem. Thank you!!! failed to load the ACPI\TOS1901\2 device driver\driver\fwlnk & daba3ff & 2
-
Weird Apple TV photo flow behavior
I have an iPhone, iPad and Apple TV. I have the iCloud backup enabled. Between my iPhone and my iPad library workflow and picture works perfectly. The photos I have in the iCloud library are those that appear in my phone and my tablet. But when I use
-
Open / convert LabView7 VI or Lib in/to Labview 9
Hi, I skimmed through many posts related to backwards compatibility, but I have not found a clear answer/solution. I have LabView2009 installed on a vista (and windows 7) machine. I'm trying to connect a spectrometer and fight in labview VI. Manufact