How to configure multiple monitors?

Similar Questions

• How can I configure multiple monitors for my desktop?

  My desktop computer running Windows Vista and I can't seem to set up multiple monitors.  I tried to changind display settings, but "several screens" are not listed.  When I unplug and reconect sreenc it gives me the double adjustment in all screens.  HOW CAN I GET MY COMPUTER TO DETECT OTHER SCREENS? HOW CAN I CHANGE THE EXPANDED SETTING?

  Hello

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to configure multiple clusters on the same machine.

  I'm trying to configure multiple clusters on the same set of machines. I put the name of the cluster and multiple cases IP addresses different for each cluster. However I am still in train and error stating:
  "This indicates that there are multiple clusters on this network, try to use network configurations that overlap.
  
  Isn't this possible? If it is possible, is it still possible that I need to tell the virtual machines that they belong to different groups?
  
  Thank you
  Jacob

  I put these lines in my script for starting a prod. For dev I REM out as below.

  REM set java_opts = % java_opts %-Dtangosol.coherence.clusteraddress=224.0.0.1
  REM set java_opts = % java_opts %-Dtangosol.coherence.clusterport=65432

  Andrew

• Pavilion p6787 c - b, how to configure both monitors?

  Hi, I have the flag c - b p6787 PC Bundle w / double HP 2311 monitors x. I was wondering how to set up two monitors exactly how the manual says?

  I have lost the manual and need two monitors again but can't find a way to do it. Thank you!

  Here are the specifications of your HP Pavilion p6787c desktop computer and two x monitors HP Pavilion 2311. I have the same computer and the monitor bundle. The AMD Radeon HD 6450 computer graphic card has HDMI and DVI - I outputs. You want to connect a monitor with a HDMI cable and the other with a cable DVI. These cables should be included with the purchase.

• How to configure multiple instances in CF9

  I'm having some problems with a couple of our intermediate servers that run multiple instances of CF9, and I do not know if they are properly configured. I have installed CF9 Enterprise multiserver and I created 4 additional instances by using the Instance Manager. I also created a virtual machine for each of them to use specific Java and re-recorded each service in order to use the custom Java virtual machine. In Apache, I added the following for each virtual server (by changing the serverstore and the port):

  < IfModule mod_jrun22.c >

  JRunConfig Serverstore "C:/JRun4/lib/wsconfig/muffin/jrunserver.store".

  JRunConfig Bootstrap 127.0.0.1:51000

  < / IfModule >

  However, when the service is stopped for one of the sites, rather than get the JRun error 500 but it will return a CF error or the site will still ride. But if I stop the backend CF service he will kill all the sites.

  It seems therefore that all instances are still tied to the main service. Y at - it something that has not been configured correctly or something I'm missing here?

  I used this guide during the installation in place all the http://help.Adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc4 .html

  Thanks for any help.

  Most of the time, everything seems as it should work.

  My jrunserver.store files all say the same thing as yours.

  Did you do a restart on Apache and CF just to make sure things are picked up correctly?

  A number of things you can try, but I don't know if it will make a difference or not.

  In each of your virtual servers, remove the

  JRunConfig Verbose true

  JRunConfig Serverstore "C:/JRun4/lib/wsconfig/2/jrunserver.store".

  JRunConfig Bootstrap 127.0.0.1:51000

  And just do:

  JRunConfig Verbose true

  JRunConfig Serverstore "C:/JRun4/lib/wsconfig/2/jrunserver.store".

  JRunConfig Bootstrap 127.0.0.1:51000

  Also add in "JRunConfig Apialloc false" to each of them. This will allow the stub to take memory from the operating system instead of Apache which is supposed to be safer.

  Let me know if any of these help not at all.

• EA2700 - how to configure multiple ports

  The EA2700 is a router 4 ports (Ethernet) + WiFi.

  I want to configure the port forwarding, but the configuration screens won't let me set up several ports.

  It allows only an IP address to a transmitting device.

  I have an iMac and a Mac-mini two ethernet connected and a random collection of iPad/iPhone/printer, etc. WiFi devices.

  The Mac mini is a web server and is visible on the outside, but not to the iMac.

  The iMac can partially accessible by using the ip address of the mini (192.168.x.x), but while it displays the text on the page, none of the pictures show.

  I'm converting a Comcast Technicholor-modem/router WiFi to a surfboard 150 + LinksysEA2700.

  As far as I know, working directly from the iMac all connectivity works as expected, except for the mini.

  IF I disable the port forwarding, contact attempts are simply the prsented with the login to the EA2700 page.

  Normally you can not forward the same port of two different IP addresses.

• Dell XPS 8500 with 1 GB AMD Radeon HD 7570 - how to connect two monitors or?

  Hi, I got my Dell XPS 8500 today with the 1 GB AMD Radeon HD 7570.

  Before buying the office, I read online that the AMD Radeon HD 7570 supports Eyefinity.   Eyefinity is supposed to be capable of supporting 4 monitors using the HD 7570 map by the description here: http://www.amd.com/us/products/desktop/graphics/7000/7570/Pages/radeon-7570.aspx#2

  When you look at the photos of the Dell XPS 8500 online I thought that Eyefinity support was to use a display in addition to the DVI port Port.   Specifically, I thought that a monitor has been supported by DVI monitors while 4 thru two supported using an active connection to the view port using a product like the DisplayPort Accell UltraAV K087B-005 / 3 x multi-monitor DVI - D single-link adapter.

  To my surprise the graphics card came with an HDMI port, not a display port and I believe that HDMI port is a connection from one to the other, and not one of many display connection.   Maybe someone can correct me if I am wrong on this point.   But if I'm not wrong then, this would imply that, at most, the Dell XPS 8500 with the AMD Radeon HD card 7570 can support up to only 2 monitors (one DVI port) and the other HDMI port instead of 4 monitors as described on the above link.

  Others would agree with this statement?

  Note that the Dell XPS 8500 also has a VGA connector on it but I tested it using a monitor on VGA and a monitor on the DVI connection and the computer that reported as an invalid monitor config.   Probably because the VGA and DVI connections are originally the same video display as connect two monitors to display even has no logical sense.

  I have not tested the HDMI port for the second monitor again mainly because I don't have a spare HDMI cable on site at the present time.   I'll probably buy one tomorrow unless I see the comments of my post, specifying that a second monitor can be moved through the HDMI port on the AMD Radeon HD 7570 map...   I'd be surprised if that were the case (1 monitor system would be quite restrictive), but it is difficult to say with certainty, because the VGA and DVI connections at the same time have been marked by the computer as an invalid configuration...

  Any thoughts on the different ways to configure multiple monitors with the XPS 8500 and the 1 GB AMD Radeon HD 7500 is appreciated.

  Thank you.

  Doug

  If the card is not a display port is not an eyefinity card and cannot stand 3 monitors... it will be 2 monitors, no problem... I couldn't find anywhere on the site of Dell, where he says that the card was eyefinity... If you want 3 assumption of monitors you can buy a video card that supports.

• How to lock the desktop icons in a multiple monitor configuration

  Original title: lock the desktop icons - and display

  Working with Windows 7 Home Premium has a problem processing 2 pieces: no matter how many times I said I want the display screen appears on the monitor, the screen of the computer, every day he arbitrarily returns to the computer screen only. That creates the 2nd problem: the desktop icons that I have arranged for the largest monitor rearrange themselves to adapt to the computer screen. Is there a way I can lock the icons in this position that I used to be able to do? Or is it possible that I can keep the display to go back to the computer screen? (I'm careful to apply the instructions to display before the specified seconds elapse).

   

  Hello

  I suggest you to go through the steps mentioned in the link and the Coachman.

  On a system running Microsoft Windows 7, the desktop icons can be moved to positions at random during another monitor main screen.

  http://support.Microsoft.com/kb/2001334/

  See also:

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx

• After upgrade, Firefox 43.0.0.5820 does not appear under actual multiple monitors V5.11! How can I fix it?

  After the V43.0.0.5820, Firefox works but is invisible on the screen. I do not remember what version I have updated since then, but this is done normally under actual multiple monitors as with all other software installed.

  Currently it is forcing me to use Internet Explorer, which works flawlessly.

  If I stop actual multiple monitors, Firefox won't stay visible well that listed in Windows Task Manager.

  When I'm out of multiple monitors, Firefox works normally.

  How can I fix it?

  I uninstalled V43 and re-installed V42. This seems to have solved the problem. I didn't answer on the forum of the AMM yet but it's still the early days. I'll post a response that I get to help a resolution.

• How to set up multiple monitors with desktop

  How can I set up multiple monitors with desktop computer?  (DVI output)

  http://Gizmodo.com/5141386/win-7-tip-adding-extra-monitors-is-so-easy-a-Caveman-could-do-it

• How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  This is not possible with the way in which we collect information.

• How to configure a VM with multiple network cards to see Agent?

  How to configure a VM with multiple network cards to see Agent?

  We can archive this requirement by configuring the subnet used view Agent.

  The subnet determines which view address of Network Agent provides the server instance to connect to view for the client protocol connections. The view on VM officer has more than one NIC

  Follow the procedure below:

  on a display Agent installed VM,

  * Recording of VM session.

  * RUN--> type regedit or type regedit.exe at the command prompt

  * Create a registry entry to configure the subnet.

  For example: is HKLM\Software\VMware, Inc. \VMware VDM\Node Manager\subnet = n.n.n.n/m type - REG_SZ.

  In this example, n.n.n.n is the TCP/IP subnet, and m is the number of bits in the subnet mask.

• How to configure ESS to the multiple proxy weblogic administration console

  Hello

  We use a 11.1.1.7 OSH and OAM webgate 11g and 11.1.2.

  To bring two weblogic server admin console in Kingdom of Single Sign-on.

  
  Please let us know how to configure ESS to the multiple proxy console weblogic.

  Thank you

  Stern John

  Activate the configuration of the virtual server on OSH and assign each administration console to another virtual server.

• How can I configure my monitor which is a touch screen?

  Please tell me how to install my monitor touchscreen, I got really ill use now because my hands are becoming difficult to use.

  How could anyone here know? You have not provided any information. Read the documentation that came with the monitor, or consult the manufacturer's website or communicate with people for their support.

• Start bar begins on a bad office in a multiple monitor configuration.

  I have my Windows 7 Home Premium machine series upwards with two monitors extended desktop display. I'm having a problem where sometimes, when I restart the computer, the start menu begins on the secondary display even if the icons are correctly located on the main display. I have to disable the secondary display and reactivate to solve this problem. It's extremely annoying; y at - it a fix for this problem?

  Rather than the deactivation and reactivation of the secondary display, follow these steps:

  1 - Check that the second screen is defined as primary in the resolution options.

  2 - the next time you experience the misplaced taskbar, unlock the taskbar (by clicking on the right) and then dragging it to the correct location.  The taskbar will remember this post - that it cannot do when it is placed automatically during the installation of multiple monitors.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!