How to configure my computer to print?

Similar Questions

• How to configure the computer to place and receive phone calls?

  I get a modem to the PC and would like to know about Computer Configuration to place and receive phone calls.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  Hello

  You can make and receive calls using Windows 7, since it is compatible with the hardware and software used by most Internet calls services calling.

  You can use Skype or any other third-party application to make and receive calls on the network. You can also consult the help link and check if it helps.

  Make a phone call over the Internet (VoIP)

  http://Windows.Microsoft.com/en-CA/Windows-Vista/make-a-phone-call-over-the-Internet-VoIP

  (This article also applies to Windows 7)

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• How to configure the COMPUTER strategies on Simulator

  Storm of BB JDE 4.7.0

  I try to load a .cod from SD card file, save it as a code module and get the descriptors to the application.

  I can read the file into a buffer, create the code module and get a handle invalid NULL (what seems). But when I call saveNewModule, I get a returned value of 4, I think it's CMM_MODULE_EXCLUDED.

  As a result, my next call to getApplicationDescriptors Gets an exception indicating that the argument is not valid (the handle).

  First, the call to saveNewModule returns a 4. The CMM_ state values are defined by a name, but not of value. Where are defined the values?

  Second, I suspect that it is because of the policy IT. What should be put in place in the Simulator to work. There are about 100 different things in your name authorization code download. I have no idea what those who must define and this than to ignore. I tried a few different configurations by going right to the bottom of the list, and it did not work. It should be a kind of it political to emulate a fully equipped device up and running.

  2 questions here...

  1. where are the values of State CMM_ defined by number for debugging purposes.

  2. how we set up the it policy in the Simulator to do what I'm trying to do.

  Thank you

  -Donald

  Never mind. It was because I had the wrong County when reading the code file... I was out of one.

  I can close this...

  D

• How to configure a d7400 to print from the ipad.

  I'm trying to get my iPad to print using the HP Home & biz on my D7400 printer software. Web pages say it is compatible, but no instructions on the implementation of the offer (at least that I can find). Any help would be greatly appreciated. I will also be in place of a C309g as soon as this one works, I hope they are similar! Thank you

  Yes, the application does not provide an option to print from Safari.

  Don't forget to activate the soft (settings > ePrint record) by providing an e-mail address, then you will get an activation code.

  As soon as the app is registered, you will be able to print web pages using the Web in-app browser.

• How to configure the computer to connect to a specific pool in sight

  I'm trying to find out how to get some machines to automatically connect to a specific pool, I created. What would be the best way to do this?

  Thanks for any help!

  There are settings of command line for the client to display which allows you to specify the pool and desktop computers, you should connect to.

  Use of VMware View Client command-line build-233023 4.0.1:

  desktopName - Office of XXX for autostart

  domain name - domain XXX for server connection

  -folder XXX file with the additional command line parameters

  (If available) XXX - languageId to use language ID

  -non-interactive message boxes of repress to start fully scripted error

  -password XXX for server connection

  desktopProtocol - XXX try using the specified protocol desktop display

  desktopLayout - Office XXX screen size specify (for example, fullscreen, multimonit

  or, windowLarge or windowSmall)

  -XXX URL serverURL to the view connection server

  logInAsCurrentUser - XXX connect you as an existing user

  user name - XXX user name for the server connection

  -rollback cancels a check out (required - desktopName)

  -Check box on the desktop for use in offline mode (required - desktopName)

  )

  -checkin Check in the office (need - desktopName, must be verified

  out)

  staycheckedout - stay checked after check-in (required - desktopName)

  offlineDirectory - path Local to check Office (required - desktopName)

  -?                      Display this help

  Option names are case sensitive.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• How to configure my computer to open several search windows?

  I used to be able to open several search windows, but now the latest search is replaced by the new destination of research?

  Thanks, MikeNM

  Hello

  Refer to windows Help article and check:

  http://Windows.Microsoft.com/en-us/Windows7/searching-in-Windows-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/advanced-tips-for-searching-in-Windows

  Let us know this help.

• When I turn on my computer an error message comes up saying "you are over-quota, please reconfigure to use less space. How to "configure"? I defragmented etc. and it does not help? Thank you

  How to configure my computer?

  I saw a good amount of messages on this lately, enough to make me think that there is some malware floating around the cause.
  This error occurs usually after a computer has been infected then first make sure the computer is completely virus/malware-free. Do not skip this.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  At the very least do the preparatory work and then scan with MalwareBytes' Anti-Malware in addition to your regular antivirus program.

  Then locate the disk quotas that can be defined. If the machine is clean and there is no set of disk quotas, copy the lines between asterisks a Notepad document and save it as undopolicy.reg. Double-click undopolicy.reg to merge into registry.

  *****
  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  'EnableProfileQuota ' = -.
  'ProfileQuotaMessage ' = -.
  "MaxProfileSize" = -.
  'IncludeRegInProQuota ' = -.
  'WarnUser ' = -.
  'WarnUserTimeout ' = -.
  MS - MVP - Elephant Boy computers - don't panic!

• How to configure in the apex using other engine of transformation XSL - FO instead of Bi publisher

  can someone give me a quite complete example for me on the engine configuration of processing XSL - FO in the Apex.

  I'm feeling rather puzzled about the example set by the introduction of the link:http://www.oracle.com/technetwork/developer-tools/apex/application-express/configure-printing-093060.html#06

  in the apex_fop_render.jsp file.

  Hi 2952702,

  2952702 wrote:

  Please change your login username of "2952702" to something meaningful. Reference: Video tutorial how to change username available

  When I install the apex5 rest data service, the installation guide tell me pdf printing is supported by the rest data service

  but after the installation of ADR, I don't have the result I want.

  

  Yes, as you directed in the code snippet included listener Web Oracle APEX Documentation Options, Services (ORDS) data Oracle REMAINS usable as a PDF as FOP support print server is included in the ADR 2.0 and later (last ADR 3.0).

  Reference:

  • Marc Sewtz: PDF printing with Oracle Application Express 4.2.2
  • http://www.Oracle.com/technetwork/developer-tools/Apex/learnmore/custom-PDF-reports-1953918.PDF
  • Re: Printing with APEX 5.0 PDF

  NOTE: The links are for APEX 4.2, but they still apply for APEX 5.0, if you plan to use ADR 2.0 and later versions. These links show how to configure ADR as a print server and how to design and print reports.

  I hope this helps!

  Kind regards

  Kiran

• I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?

  I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?

  Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)

• How to configure SMTP settings to the 'SCAN to Email' function on the XEROX WorkCentre 3615 multifunction printer?

  Separated from this thread.

  Have another QUESTION of community, please can someone help me on how to configure the SMTP 'STEP by STEP' settings to "SCAN to Email" function on the XEROX WorkCentre 3615 multifunction printer? Where should I start? On the computer or the printer? I have gmail emails to serve 'FROM' and for people, I'll send scanned docs, what is better to use email, gmail, at & t, yahoo or so? Thank you in advance.

  Hello

  Please contact Microsoft Community.

  Please confirm which email client do you use?

  I suggest you refer to the article mentioned to implement a multifunction device or an application to send emails with Office 365 for reference:

  https://TechNet.Microsoft.com/en-us/library/dn554323%28V=EXCHG.150%29.aspx?f=255&MSPPError=-2147217396

  I hope this helps. Do not hesitate to contact again us for any technical assistance,

• How to configure my grandchild as a user on my computer?

  How to configure my grandchild as a user on my computer?

  Hello
  What version of the operating system is installed on your computer?
  What version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
  You can follow the procedure in the article to create a new user account.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  See also:
  What is an administrator account?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-an-administrator-account
  What is a standard user account?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-standard-user-account

• How can I configure efax for my printer hp officejet 45oo wireless

  How can I configure efax for my printer hp officejet 4500 wireless

  Hello

  The Officejet 4500 with analog fax capability and does not support the eFax.

  Only models listed below support the feature of eFax:

  http://support.HP.com/us-en/document/c03102078

  Shlomi

• After trying to use Fix - It to fix XP does not recognize the USB key, had to go back to the last good configuration and computer charge always VERY slowly. What's past and how to fix it?

  Windows XP SP3 has ceased to recognize a USB flash drive and card reader that he always acknowledged in the past. I tried to use Fix - It to correct the problem. Fix - It is then asked to restart the computer. When the computer is restarted, it would not load. After waiting almost two hours, I restarted with the last good configuration. Then reloaded, it took nearly an hour. Before using the Fix - It, the computer was loading in less than five minutes after a reboot. There a lot of things on it. What can I do now to solve the problem posed by Fix - It and also correct the problem with XP recognizes does not flash drives?

  Hi lental,

  ·         Have what fixit you tried?

  ·         Do you have an error message when you try to start the computer in normal mode?

  ·         What is the brand and model of the computer?

  ·         You're able to boot in safe mode?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  Method 3: Follow the steps in the article to resolve the problem of USB.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Advanced troubleshooting tips for General USB for Windows XP problems

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  Hi placebow,

  Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options. On the general tab, click single-click to open an item. (To return to the standard click, click double-click to open an item.)

  The setting applies not only at the office, but also in other areas of the shell.
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• How can I configure my computer to another person can use with their own password and do not go through the mine?

  How can I configure my computer to another person can use with their own password and do not go through the mine?

  Hello

  Activate the guest account or setup a new account with the access levels that you must allow.
  either will work.

  How to activate the guest account enabled or disabled in Vista
  http://www.Vistax64.com/tutorials/126933-guest-account-turn-off.html

  How to create a new user account in Vista (also see the related tutorials)
  http://www.Vistax64.com/tutorials/93009-user-account-create.html

  User accounts in Windows Vista
  http://www.optimizingpc.com/Vista/multiple_useraccounts.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">