How to configure the ODBC Access on Windows 7 driver?

Similar Questions

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to configure the VLAN-access plan on Cisco 3650

  Hello

  I would like to configure the VLan-access plan to filter some of the traffic VLAN, but I am unable to run vlan-map command on the cisco L3 3650 v03.06.00E

  Hello ahmed,.

  According to the command search tool, 3650 v03.06.00E does not support the vlan-access plan.

  You will need to catalyst 3650, 3SE to configure "vlan access map.

  https://Tools.Cisco.com/support/CLILookup/cltSearchAction.do

  Show vlan-plan of access (catalyst 3650, 3SE)

  VLAN-access plan (catalyst 3650, 3SE)

  I hope this helps.

  Please evaluate the useful messages.

  Thank you.

• my windows pc very experience 1, I am embarressed to admit that I can not understand how to configure the windows/outlook e-mail system. This pop and smtp or what ever Q was, I still can't understand.

  I'm unable to set up Outlook, or now called windows mail, I think. but for the life of me I do not understand how to configure the e-mail program that comes with now it windows Vista 64 that came on my new pc.  can someone please?  Thank you

  Windows Mail is/was not Outlook.

  Windows XP e-mail program called Outlook Express.

  Outlook is a part of the office.

  Windows Mail in Vista is the replacement of e-mail for Outlook Express (XP) program.

  Read this section on how to set up Windows Mail in Vista:

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel

• How to configure the fax service

  Fax

  do I need a phone number to set up the fax I use dsl

  Hi waawa1951,

  Yes, you will need a phone and number phone of fax on the installation computer.

  See the links for more information below.

  How to enable and configure the fax service in Windows XP
  http://support.Microsoft.com/kb/306550

  How to send a fax in Windows XP

  http://support.Microsoft.com/kb/306657

  Use your computer to print, scan, fax

  http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/printfaxscan.mspx

• How to change the font size in windows diff that is email; Word; etc.

  How to change the font size in windows diff i.e. E-mail; Word; etc.

  Try the following: (Note: you must be an administrator to do so)

  1. go into the control panel.

  2. double-click on 'ease of access '.

  3. click on "make the computer easier to see.

  4. click on "change the size of text and icons.

  5. click on "Continue" to the pop-up message.

  6. Select "larger scale (120 DPI)(-rendre le texte plus lisible) and click on 'OK'."

  You need to restart for the change to take effect.

• How to fix the user accounts in windows 8

  How to correct the user account in windows 8 on new g7 2246nr, I put to your laptop using the Microsoft account then switched to a local account.  I found myself with i admin working the rest of my files are broken up between 3 other user accounts.  I spoke with Microsoft to try to consolidate the accounts and they used a command line in the command, but he has not done. I always work with the system, but it has problems. I reloaded the software so for 3 times. All know how to correct the problem without reload all the software again?  also, after configuring sharepoint in Office Pro Plus, he created another administrator account.  I do not think this would happen?

  Hi BJ2124,

  Although I regret the inconvenience that you had with your experience of Microsoft Windows 8, you can better receive the technical expertise you need by contacting Microsoft about the issue of multiple account creation.

  You can call Microsoft Customer Service at 1-800-642-7676
  Mon - Fri: 05:00 - 21:00; Sat - Sun: 06:00-15:00 (PST)

  As a reference, I included the link to the technical support of Microsoft Windows 8 page:

  http://support.Microsoft.com/contactus/?ws=support

  Also, here is a reference link to change logins to Microsoft for local accounts:

  Microsoft how to switch from one account to a Local account in Windows 8

  And finally, here is a quick reference to solve the problem that you encounter while using an account download troubleshooting tool from Microsoft:

  The problems of account Microsoft Windows 8 with convenience store "Microsoft accounts"

  In this forum support is available for support hardware/software HP. I will provide better supported with your hardware/software of HP. If you need help with a software which is another provider, so I can re - direct you to reference appropriate at this time.

  I hope that you can mark these messages as solved, so that you can inspire others to follow your example with success. You never know who you can inspire.

  -How can I give Kudos? | How to mark a post as solved? --------------------------------------------------------

• How to disable the Welcome screen in windows 7 Home premium

  original title: disabling the welcome in Windows7 home premium screen.

  How to disable the Welcome screen in windows 7 Home premium. Therefore, type the user name and password when connecting

  Hello

  1. If you have Windows 7 Professional or ultimate edition, open the Group Policy Editor and navigate to the following policy.

  Computer Configuration / Windows Settings / Security Settings / Local political / Security Options.

  In the right pane, double-click the policy:

  Interactive logon: do not display last user name - change to "Enabled".

  2. If you have the Home Premium version, you can set this policy using the registry.

  * Make sure that you back up the key before making changes

  Open Regedit and navigate to the following location.

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\

  In the right pane, locate the dontdisplaylastusername value. Double-click this value and change the value to 1 data. Click OK.

  If this value is not present, right-click and select new/DWORD (32-bit) Value.

  Name the dontdisplaylastusername (respect for case-sensitive) value, and then make the above change.

  Here is a screenshot of the login window.

  http://i196.Photobucket.com/albums/aa86/rvmv/ManualLogOn.jpg

  Let us know the results.

  Concerning

• How to configure the logo screen of handguns to several domain user time?

  How to configure the logo screen in time to punch to several domain like domain1\administrator, domain2\administrator and My-PC1\administrator user in windows 2007?

  Hello

  It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  For reference:

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/de5fea8e-E327-4D71-a599-546dea543149

  Hope this information helps.

• How to set the java path on windows 8

  How to set the java path on windows 8

  Original title: Java

  Way easier access and the value of your PATH environment variable is as follows:

  1. Press + W to display the search settings panel
  2. Type "path".
  3. Choose "edit the system environment variables.

• How to configure the bluetooth with Kyocera android phone connection to share photos, music & video files

  Original title: Windows 8 Configuration bluetooth with Kyocera android phone?

  Configuration of bluetooth of Windows 8 with Kyocera android phone?  I got a laptop with bluetooth Tech. How can I set up a connection and share photos, music & video files?

  Hey GQ - Jon'Jon,.

  Make sure that Bluetooth is enabled on the computer as well as your Kyocera android phone.

  Make sure that the phone is paired with your computer.

  For information about how to configure the Bluetooth with Kyocera android phone connection to share photos, music & video files, it would be better if get you in touch with Kyocera phone support for assistance. Please see the support link:

  http://www.Kyocera-Wireless.com/support/phone/

  Please feel free to respond if you face problems with Windows in the future.

• How to configure the network adapter when you run ESXi on VmWare workstation?

  How to configure the network card installing ESXi on VmWare workstation 6.0.0?

  These are the options: I tried bridged, host-only NAP.  None of them works

  

  What Miss me? driver or adapater?

  I'm running on vmware workstation on Windows 7 with Lenovo laptop.

  in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

  If please have 4 GB of RAM and re-run Setup. you will get through.

  message about the network card should also not appear after that. What kind of network you choose depends on your need.

• Hey Adobe, could I know how to configure the printer setting in Photoshop CS6 on the Lable print.

  Hey Adobe, could I know how to configure the printer setting in Photoshop CS6 on the Lable print.

  Hello

  Are you referring to the labels under brands of printing option when you open the print dialog window?

  If you check this option button, the name of the file you are editing will be printed on the top of the page, as shown below. You can change this label by changing the name of your file (go in file > save the to do)

  

  If you want to learn more about the print marks, take a look at this help document.

  If you try to print actual labels, you will need to use a pre-made template or create your own. Here is a template you can download free Adobe!

  If you have any other questions, feel free to post here again

  See you soon,.

  Kendall