How to configure time zone information in the failover database

Similar Questions

• How to change time zone on 8, the calendar application windows

  I installed Windows 8 and the value of my pc time zone to the EAST, but the Windows 8 calendar application displays PST.  How can I change the time zone on the calendar in windows application 8?

  Thank you for your review, but a few weeks ago I received updates of Windows 8 and the problem was solved by itself. I appreciate your time...

• How to upgrade time zones to include in the United States?

  I restored my computer once a hard disk cleanup and now time zones include only countries than the United States, which is where I live. How can I fix to add to the USA?

  Hi Michael,

  Thanks for posting in the Microsoft Community.

  Have you tried connecting to your PC in safe mode with networking to see if the problem persists in mode safe

  To start the system in safe mode , please perform the steps mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  I suggest you follow the steps below and check it, if it helps.

  1. Right-click on the clock, at the far right of the taskbar, and click Adjust Date/time

  2. Left click on the clock, on the far right of the taskbar and click change date and time settings

  3. Click on the change of time zone button.

  4. Click on the drop-zone, and then select your time zone

  5. Check the adjust automatically

  6. Click OK

  You can also refer to the article below and check if it helps.

  http://Windows.Microsoft.com/en-my/Windows/set-clock#1TC=Windows-7

  Just reply to us with the State of the question.

  Thank you.

• How to calculate time zones

  I have a simple clock that shows the current time using the GET. Time control. My problem is the following. I am in the Central time zone. In order to calculate Pacific time subtract 2 hours of hours as follows
  "hours = mydate.getHours () - 2; So, if it's 2:00 central it is 12:00 in the Pacific. Do my method will show it's midnight when it is not. How can I fix? Thanks in advance. Here is my code. I hope that with a correction, I can do the same for other time zones.
  Join the Code
  
  MyDate = new Date();
  seconds = mydate.getSeconds ();
  minutes = mydate.getMinutes ();
  hours = mydate.getHours () - 2;
  day = mydate.getDay ();
  Date = mydate.getDate ();
  month = mydate.getMonth ();
  year = mydate.getFullYear ();
  If (hours > 12) {}
  hours: 12 hours;
  AMPM = 'H ';
  } else {}
  AMPM = "AM";
  }
  If (hours == 0) {}
  hours = 12;
  }
  If (minutes < 10) {}
  minutes = '0' + minutes;
  }
  If (seconds < 10) {}
  seconds = "0" + seconds;
  }
  If (day == 0) {}
  day = "Sunday".
  } Else if (day == 1) {}
  day = "Monday".
  } Else if (day == 2) {}
  day = "Tuesday".
  } Else if (day == 3) {}
  day = "Wednesday".
  } Else if (day == 4) {}
  day = "Thursday".
  } Else if (day == 5) {}
  day = 'Friday ';
  } Else if (day == 6) {}
  day = "Saturday".
  }
  If (month == 0) {}
  month = "January".
  } Else if (month == 1) {}
  month = "February".
  } Else if (month == 2) {}
  month = "March".
  } Else if (month == 3) {}
  month = "April".
  } Else if (month == 4) {}
  month = 'may '.
  } Else if (month == 5) {}
  month = 'June '.
  } Else if (month == 6) {}
  month = "July".
  } Else if (month == 7) {}
  month = "August".
  } Else if (month == 8) {}
  month = 'September '.
  } Else if (month == 9) {}
  month = 'October '.
  } Else if (month == 10) {}
  month = 'November '.
  } Else if (month == 11) {}
  month = "December".
  }
  time = ((hours) + ': ' + (minutes) + ': ' + (second) + "" + (ampm));
  datefinal = ((day) + "" + (date) + "" + (month) + "" + (year));
  

  Answer found. All I had to do was make an hours greater than or equal to 12, see code below.

  9 line u need to write in your code
  If (hours > = 12) {}
  hours: 12 hours;
  AMPM = 'H ';
  }

• Necessary to define the database time zone differs from the OS

  We have a database of who currently resides in New York. Let's move to another server that resides in London. This is a problem, because each date which is currently in the time base is New York time, but after the move, all the new data that created time will always be time to London. We do not want users to have to remind any date preceding the date of move, will idle 5 hours if we would like to do is to have the database always on time in New York despite the BONE being London time. The server will be shared with other applications for the operating system time zone will have to remain with London time. The database will only have data for our application. So is there a setting of database that we can use to set the time zone database is different from the operating system time zone? The database is currently 10 GB but is promoted as part of the move to 11 g.

  What is the data type of the column? If the date or timestamp, then there is no time zone stored with the data. If timestamp with time zone, then the time zone of the data remains the same regardless of the time zone database and operating systems.

  SQL> select dbtimezone from dual;                    
  
  DBTIME
  ------
  -05:00                                               
  
  SQL> alter database set time_zone='EST';             
  
  Database altered.
  

• How to connect NEWSPAPER of INFORMATION to the table of the newspaper so that the operation of ROLLING BACK of the user?

  How to connect NEWSPAPER of INFORMATION to the table of the newspaper so that the operation of ROLLING BACK of the user? any example?

  Fjean wrote:
  What is the independent procedure/function?

  You can create stand-alone procedure to record messages even if the transaction is rolled back messages is stored in the table and are committed.

  Example of

  SQL> DECLARE
    2    PRAGMA AUTONOMOUS_TRANSACTION;
    3    emp_id NUMBER(6);
    4    amount NUMBER(6,2);
    5  BEGIN
    6    emp_id := 200;
    7    amount := 200;
    8    UPDATE employees SET salary = salary - amount WHERE employee_id = emp_id;
    9    COMMIT;
   10  END;
   11  /
  
  PL/SQL procedure successfully completed.
  
  ---log_error procedure
  -- Table Err_tab ( seq number , time_stamp date, message varchar2(4000))
  CREATE PROCEDURE log_error (p_message VARCHAR2)  AS
    PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
    INSERT INTO Err_Tab(seq.err_seq,SYSDATE,p_message) ;
    COMMIT;
  END log_error;
  /
  
  -- You can use this procedure to log
  -- error messages as follows in a transaction
  BEGIN
    log_error('Start emp update') ;
    UPDATE emp set
    log_error('End emp update');
  EXCEPTION WHEN OTHERS
    log_error('Update Error '||SQLERRM);
  ROLLBACK ;
  END ;
  /
  Even in case of Rollback error messages will be inserted to log table 
  

  SS

• How to configure a FTP server and the web and integrate with 5.2 DMM

  Hi all...

  I need to set up an external server only for publishing content to reduce the overhead of the DMM server.

  can someone guide me on how to configure the external server and it intergrate with the DMM 5.2

  Thank you

  semuthu,

  
  

  Notes from the Release Notes:

  
  

  Limitations of compatibility with Microsoft Internet Information Server (IIS)

  DMP who use firmware version 5.2 is compatible with a single version of Microsoft Internet Information Server.

  This supported version is IIS 6.0 for Windows 2003 Enterprise Edition. If you do not have the support for IIS version but

  want your DMP to recover the assets of a Web server, we recommend that you use Apache instead of IIS.

  
  

  
  

  I suggest to use Apache instead of IIS for the Web Server service. IIS can be used as FTP if necessary.

  There are a lot of Documents on the Internet concerning the implementation of Apache and FTP servers.

  
  

  Using Apache with Microsoft Windows

  http://httpd.Apache.org/docs/2.0/platform/Windows.html

  
  

  Quick HOWTO: Ch20: Apache Web Server

  _ http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO: _Ch20_:_The_Apache_Web_Server

  
  

  Once the Web server is configured and operational. You simply record your multimedia content on the Web server

  and then have your DMS assets in the library using an external URL address for its location.

  
  

  If you want to use the external server for other features in the DMM, you can see how to set up

  here:

  
  

  http://www.Cisco.com/en/us/partner/docs/video/digital_media_systems/5_x/5_1/DMM/user/guide/DSM+ETV.html#wp1073210

  Goto the section just below the CNSC & WAAS...

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

• How to change time zone on VMHost

  Hey all

  I'm running out of ideas, doesn't know it's so hard to find how configure/update the time zone on the ESX host using powercli

  Thanks for your advice much appreciated!

  Cheers, Rafael

  You can specify the name of the $vmhost instead of the real object, which is called the characteristic of the object by name (OBN).

  The problem is that the $host variable is an internal variable used by PowerShell.

  Choose a different name for the variable, and it will work.

• In regards to the time zone setting in the service platform Azure from microsoft

  I have a question about PAAS zone. How we define UTC + 5.30 time zone on particular service.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Missing time zone - cannot see the India time zone in the list of time zones

  Hello

  I have a Windows 7 Home Premium 64-bit edition installed on my Dell Studio laptop. As I lived
  in the United Kingdom, I had setup my timezone UTC (Dublin, Edinburgh, Lisbon, London).

  Now, I have reinstalled in India. I want to change the time zone UTC + 5:30 (Delhi, Mumbai, Calcutta).
  However, this time zone is not listed in the drop-down list. So I can't set the time zone.

  I read on the site of Microsoft Support that Microsoft has released an update to resolve the problem of the time zones (Windows6 1 - KB2779562 - x 64).
  I have applied this update, but I don't see the India time zone in the list.

  Please can someone help me? All tracks will be appreciated.

  Thanks in advance.

  See you soon

  How to reset the zone list in Windows 7...

  http://www.SevenForums.com/tutorials/100925-time-zones-restore-missing-default-time-zones.html

• Get the time zone when select the region fron DropDownList

  Hello guys,.
  I am applying in which,
  I get all the zone in an ObjectChoiceField list.
  Now, when I select one of them,
  I want to get this time
  As I put the zone in the operative Asia/Kolkata.
  Now in the My Code.
  I select the 'America/Denver' of ObjectChoiceField.
  Now, I want time zone "America/Denver '.

  How can I do that. I'm frustrated.

  I have less time.

  Please someone help me.

  Resolved. Thank you all guys.

• How to configure Task Scheduler to run the program when the connection is established

  Windows 7 64 bit
  Dial-up Internet access

  I want to use the Windows 7 Task Scheduler to run a program IMMEDIATELY AFTER a dial-up connection is made to the internet.

  How can I configure the Task Scheduler in Windows 7 to do this, please?

  I am familiar with the Scheduler of tasks with the command line parameters.  Any help is appreciated.

  Thank you

  FYI: If an example is needed, Microsoft Security Essentials can be configured to update virus through this path with the argument definitions:

  C:\Program Files\Microsoft Security Essentials/MpCmdRun.exe SignatureUpdate

  Maybe someone can use it to show how to configure the Windows 7 Task Scheduler to update MSE virus definitions, once the connection dial-up was made?

  Otherwise, for example, another program to run once established a dial-up connection would be OK, thanks

  Hello

  Scheduler of tasks is time driven.

  For order-driven event, you need a script.

  Question like that is much better treated in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to adjust time settings manually on the endpoints of TC

  Hello

  We have endpoints of TC TC7.3.2 running. We have NTP and already set to OFF. We want to set the time manually using the clock buit - in the codec. How can adjust the time manually. On the web interface, I see on the time settings to set the timing of the hours/minutes. Is there a command on the API to do this?

  Time.PNG

  

  Appreciate for your help.

  Thank you in advance.

  If endpoints using the touchscreen device, you should be able to adjust the settings of the time on the touch screen. Make sure that UserPreferences is set to this setting is available on the touch device and access the setting.

  Accessing the web interface Configuration > System Configuration > UserInterface > UserPreferences: on

  On the touch screen, browse on settings > administrator > admin settings > Date, time & location

  From there you should be able to set the clock manually synchronised.

  Kind regards

  Acevirgil

• How to change time zone in VCSA 5.5?

  Hello

  I installed VCSA 5.5 of the FVO. By default, it has been configured to the UTC time zone. I tried to change the updated time zone Pacific time, but I was unable to do so even after changing the options of NTP server, server authorization and synchronization with a server ESXi. Is it possible that I can change the time zone in VCSA 5.5

  During my research, I found the following VMware, article that says that I can't change the time zone 5.5 VCSA. But I wanted to confirm if this article is still topical?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2057956

  Well Yes... always valid.

  Concerning

  Girish

• Text variables. How to change time zone?

  I'm putting in place a text for the modified time variable. However, it is not save my time zone. How to change the time zone?

  I'm sorry. I've worked on in my zone!