How to connect an IDE and SATA drive on my computer

Similar Questions

• Connection of an external SATA drive

  My desktop computer HP Pavilion HPE h8 - 1070t is not an output like my HP Pavilion Notebook 6v6t eSATA port.  Does anyone have ideas how to connect an external backup SATA drive to my office without this output port. ?

  Big_Dave.

  I changed the Vantec Sata enclosure with Azio box and it worked.  I used two boxes with my other system without difficulty.  The difference is apparently significant with the HP.  Thanks again for your support.  Jim

• How to connect my Blackberry and my computer with Bluetooth?

  I was wondering how to connect my blackberry and my computer with bluetooth and I tried, but he will not find my device. I don't know how check that the Bluetooth software included with Windows.

  Hello

  ·        Who is the manufacturer of the system and what is the model?

  I suggest you to consult the tutorial that is mentioned below. You also have a section that tells you how to check that the Bluetooth software included with Windows. If your system has been installed on the Bluetooth system then the icon will appear in the notification area. If this isn't the case, you must install the Bluetooth drivers on the system.

  How to set up Bluetooth connectivity between a smart phone BlackBerry and BlackBerry Desktop Manager

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04132

  I suggest you return the item mentioned below.

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to connect two computers and LAN

  I can't get my toshiba to interface with my desktop computer or to connect to the internet via a CAT5.
  I tried everything I know.

  I'm not too sure about the LAN MAC? He just will not connect even if the device is functioning properly.

  Any ideas?

  Here are the instructions how can connect the two computers.

  -First of all, you will need to disable the firewall.
  -Then you need to set the same workgroup on both computers
  -in the Lan Card Properties-> Protocol TCP/IP settings, you must assign the IP address manually. That is, a computer must use the 192.186.50.1 ip address and the other computer must be set to 192.186.50.2.
  -MAC address is fixed and cannot be changed. Each LAN card uses unique mac address

  After these settings, you must restart the portable computers (computers)

  PS: I recommend Google for details and further instructions.

• How to connect a wrt150n and a whole wndr3400v2 to extend your wireless connection

  How to connect these two wireless routers, but the first as a main router without losing my security and configuration of port forwarding?

  Thank you in advance for your help!

  Thank you very much for the help. The wndr3400v2 is enough for my house. Yes, problem solved.

• You can mix SAS and SATA drives in a RAID 1 PowerEdge T110 II configuration

  Hello

  I have a RAID 1 configuration and one of the two drives in the array has failed.  I've removed and replaced by another drive hoping the Dell Perc adapter H200 would rebuild the mirror automatically, but it does not.  In Server Admin OpenManage virtual disk displays as degraded.  The issue I think may be the replacement drive is SATA where the original was SAS.

  Is there a way you can make the adapter accepts a SATA drive or is it simply not supported?

  SIV

  Hello.

  Dell controllers, including the H200 are not supported mixing SAS, SATA or SSD in the same table. They may, however, each separately constitute a virtual disk on the same controller. Consider replacing the disk failing another identical or higher capacity SAS drive.

• have satalite, how to connect sony bravia and blue ray player to wired dsl internet

  have satalite tv, how to connect my player blue ray sony bravia tv and sony to a wired ADSL internet connection,

  Hello

  What do you mean exactly when you say hacking people have constantly been in?

  If you feel that your computer can be hacked, I recommend you install a good antivirus. You can install Microsoft Security Essential. This is a Microsoft free anti-virus program.

  To secure the wireless connection, go through the steps from the link and check if it fits your need. Browse the article to learn more about securing your wireless connection.

  Hope this helps and let us know if you need assistance in the future. We will be happy to help you.

• Need to find a way to understand how DB2 connect to Oracle and mirroring of data etc.

  Hi, gurus,

  I just take over a source project which is the ICOMS as400 db2 database. Seems data mirro that CDC is used to replicate from DB2 to oracle.

  I am very new to this CDC datamirror, more I am new to figure out how db2 connect to oracle, it is only through db link or what? or is it tnsnames entry?

  I wish someone in this forum can point me in the right direction.

  Thanks in advance.

  Hello

  What do you not sure about?
  If Oracle can be the site of conduct, you can use the gateway for DRDA database and we can help you with that. If you need assistance on setting up DataMirror CDC to connect to Oracle, then you will need to contact IBM because it is one of their products.

  Kind regards

  Mike

• Want to 750-209: how to connect an old sound system to a new computer

  I wanted a new 750-209 and a former speaker of Cambridge Soundworks PCWorks 19th Point Surround 4 + under low voltage. There are 2 connector; Left and right who are article 3 (each take manages 3 drivers). The envy has 1 output. It seems that I need a derivation ending in female connectors.

  My question? How to connect the two? Is it still possible? I'd hate to have a decent sound system of junk. My needs are basic - just to be able to listen on AOL or YouTube.

  Any ideas on how to accomplsh my goal.

  Just to close this debate; unfortunaely the quick response has not responded to the problem. BestBuy has suggested that I try a composed of derivation of a shot and 2 containers. Finally, I got the system works 'after' discovery that the enormous power brick disliked the new arrangement of power when I replaced the old computer with the desire. I had to replace an adapter 3 - wat and consolidate the brick. A lot of noise to get her old system to work but now I have the choice of speakers or headphones driven by a hold on a HDMI monitor. All's well that ends well. Thanks for the interest.

• How to connect to itunes for ipad airplay without using computer?

  HOW to CONNECT IPAD AIRPLAY to ITUNES WITHOUT the HELP of a FULL ❓l

  There is no need to shout. What you're trying to use AirPlay to stream content from your iPad to?

  Using AirPlay: How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support.

  (I asked for your message to be moved to use iPad forum, where you have posted is for questions about the iTunes U app.)

• How to connect external ssd as boot drive

  How do you connect an external ssd as the boot drive for an imac?

  It connect via USB, FireWire, or Thunderbolt, to restart with the key Option key and click it.

  (143523)

• Satellite U840W - how it works with SSD and HDD drives?

  American,

  I have a U840W which is a beautiful piece of work. He currently heads the Win7.
  It has a hybrid drive system, SSD 32 G and 500G HARD drive. Apparently the 32G acts as a cache.

  I tried to install Linux Mint as a dual boot with Win7.

  Cannot make it work. The installation process (Ubiquity) does not see disks or partitions.
  In a file manager or the GPart-partition manager, I see the HARD drive and all partitions.

  Help me to help the developers of the ubiquity of the problem of access to disks I can get a
  explanation of the way in which the disk system is organized and how it works?

  Any help greatly appreciated, Ian.

  The LINUX community already knows your answer and has led the path to resolve, such as the forum of mint as this thread:

  http://forums.linuxmint.com/viewtopic.php?f=46&t=124299

  Even Microsoft Windows has trouble with setup.exe on disc SSD/HDD hybrid and the Microsoft forums are polluted with their own unverified solutions, some of which are frighteningly superstitious that authoritative to be listed here.

  Ubi, Gnome and KDE are all based on the ability of Grub reliable start the player and so many different distributions don't guarantee reliability.

  I don't have the problem you describe with hybrid hard drives since the installation of 11 Unbuntu.

  Mint is not my first choice with the exception of a bureau of temporary replacement, since the authors are strongly focused on the Office UI, less than the largest army of coders behind Unbuntu and Fedora.

  I'm not criticizing the currency of your choice, but comparing the current Unbuntu boot process could shorten your objective dissection of a startup process of OEM from a manufacturer known for securing lower level specifications.

• How to connect Equium A100 and second computer via LAN

  Hello

  I was wondering if someone could help me.
  My partner and I have some difficulty with the creation of a local network between its computer and my laptop.

  Basically, the main thing is that the computer can see my laptop, but it isn't recipricating.
  My laptop is the Equium A100 (XP media Center) and as far as we know really on his computer, it's that his dual pentium 4, windows XP Home Edition and it is a pain full in the back!

  Hello

  See this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  It is described how you can connect two PCs using cross-over cable.

• Re: Satellite P200 - installation of XP and SATA driver

  Hi guys

  I'm new to the forum.

  I know there are already 100 topics on installing XP on a Toshiba Satellite P200 and believe me I have lived all of them, but I'm still fighting trying to install XP.

  I will describe the steps I've been through so if someone could tell me where I'm wrong or try something other way out then let me know:

  I went to the following site to download Intel Matrix Storage Manager:
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  First of all, I downloaded
  32-bit floppy Configuration utility
  (F6flpy3287)

  Now the first download did not contain an exe file, so I've been to unzip and copy the files on my floppy drive. I inserted my XP SP3 CD and rebooted the laptop, when XP installs the Setup files, I pressed F6 (that she mentions at the bottom of the screen) after installation of the files, that it says something like that couldn't detect the drivers and press S to select one of the pilots in total there are 4 riders, I chose all alone (so did 4 facilities in total) , but it keeps giving the same error.

  The error itself says something like the hard drive is not detected and to be honest its make me lose the will to live because I spent hours trying to figure this out.

  As there are two managers matrix downloads I tried the other as well:

  32-bit floppy Configuration Utility for Intel Matrix Storage Manager version 5.5.0.1035
  (F6flpy32)

  This one was an exe file, I have attached my USB floppy drive ran the exe file that has copied the files and I tried to choose once again each of the 4 drivers the entire installation, but it says the same thing no hard drive detected.

  Someone help me please, I would really appreciate it.

  Thank you

  To be honest, here are really quite subject to this subject and enough descriptions how to do this please, read it.

  I think the simplest is that you download the storage on the Toshiba site manager.
  Then, you can use nLite to integrate the driver on the CD.
  After that, you must also start the CD and then the HARD drive is detected (you don't need to press F6 to load the driver.

  And here's all the necessary links:
  http://EU.computers.Toshiba-Europe.com
  http://www.nliteos.com

• How to install xp sp3 with sata driver in my P8Z68-V THE?

  Hi my problem is that I want to install windows xp service Pack 3 in my new computer

  my new computer is compatible Windows7 how to install Windows XP on my new computer?
  It's my form of systems
  Motherboard: ASUS P8Z68-V (compatible with windows7)
  PROCESSOR: Intel Core i7-2600 CPU @3. 40 GHz (compatible with windows7)
  MEMORY: 8 GB
  GRAPHICS CARD: MSI AMD Radeon r6770 (compatible with windows7)
  is it posible to install windows xp sp3 on my profile?
  can u show me the steps by steps in the creation of the xp3 with sata controller
  and how to reformat and bios configuration or steps, follow the steps
  from the beginning to the end

  Hello

  You can follow this link & check if the problem persists:

  How to install or upgrade to Windows XP?

  You can also ask your question in the TechNet forum for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.