How to connect my Satellite E105-S1402 to an external projector?

Similar Questions

• Unable to connect by Satellite Z30 - A - 1 8 external projector

  Hello

  I have problems to connect to this laptop to an external projector.

  When I connect the cable, it recognize the projector and screen is displayed, but after 15-30 seconds, the screen goes black and computer keeps trying to connect again to projector and problem keeps when its connected.

  The connection to the projector is made hollow VGA cable with about 10 meters, I have tested on several other projectors with other cables and the problem persists.

  The computer is new and I have installed the latest drivers. What can I do to fix this?

  Thank you.

  Have you tried to use a shorter cable?
  Not very well but it might be possible that the problem appears due to the cable (10 m).
  That would you say, using a HDMI cable? Have you tested it?

  On the other hand I also recommend a graphics card driver.

  By the way: to switch between the internal and external monitor, you must use the Fn + F5 key combination.
  Note: If you use the simultaneous mode, you must set the internal display resolution to match the resolution of the external display.

• Save my Satellite E105 - S1402 BIOS

  Hello everyone.

  I use a Toshiba Satellite E105-S1402, and I found that there is a BIOS update recommended for my laptop.
  I'm willing to do, but I want to be very careful of it. (They say, "if it ain't broke, don't fix it".)

  I've never done an update of the BIOS before so I surfed the web to learn more on this subject. I decided that I made it through the windows because it is riskier. I have downloaded the files and burned the image to a CD (so update by rebooting my laptop operating system to start).

  However d I have a back up of my BIOS before you start the procedure. And not just a backup somewhere on my drive hard but in a place where I can use it if something goes wrong (I think a bootable CD like the one I did for the updated BIOS version.)

  Although I searched on internet I found not instructions on how to do it. Anyone know where I can find instructions on how to do it?

  PS Being the rookie I am I can not know the basic things about the whole procedure, please point out them.

  See you soon,.
  Jarlaxle

  Hi mate

  I guess that you didn't check t the box HOWTO and FAQ forums
  I m right?

  Here, you might find this:

  How to upgrade the BIOS on Toshiba laptops
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

  I think that it is a very useful documentation

  By the way; Don t update the BIOS if it s is not necessary and if the laptop works properly.

• How to connect by Satellite M30 on TV?

  Hello
  Could someone advise me please how to connect my Toshiba laptop (Satellite M30-304) to a TV?

  Y at - it a specific cable I need to use? Please let me know the details and the brand.

  Thank you
  Knockaert

  Hello

  As far as I know this laptop has a s-video port on the left side of the laptop.
  In this case, you need a cable that supports this port. Also after you connect the laptop to TV, you will need to switch to the television set with the FN + F5 key combination.
  In addition, you will need to choose the right channel of the TV.
  Have you checked the user manual? You will find a complete description.

  Good bye

• How to connect a satellite with Qosmio G30-188 receiver?

  Hello!

  How can I connect a satellite receiver to my Qosmio g30-188? I need to connect the AV signal (SCART) on the receiver to the laptop.
  can someone help me?

  Thanks in advance!

  Hello

  I didn't test it with cable SCART, but I presume that you need adapter SCART to connect to your satellite receiver. Here is the image what it looks like.

  On this map, you can connect S-video cable to transfer the picture to your Qosmio. You will find on the right side for laptop S-video PORT. For sound, you can use the audio cable (red/white) with proper adapter

  As I said I n t test it until now. In any case please check manuals s user document. Maybe, you can find some useful information.

• How to connect the Satellite Pro P100 to Hifi

  I've got Satellite Pro P100. How to connect this laptop to stereo
  It's probably easy, but what I can say... Call me stupid.

  I have head that comes out of the headphone jack, it connects to my friendly hifi.
  Ill be there is a unpleasant hissing in the background. Trying to hook up my boys in head mp3 player, and that works very well.

  Any chance of some help... Thank you

  Hello

  To my knowledge, you can connect the satellite Pro P100 to HiFi only via a cable 2 RCA Audio Y adapter. To my knowledge the laptop doesn't support the S/PDIF audio output so you only to use an analog audio port.

  You can also buy a stereo adapter with 2 x cinch sockets to connect the laptop to the stereo. This card can be plugged into the headset jack

  Check this box:
  Stereo adapter

  I think you should visit the nearest dealer of portable. It can show you the right and taken in charge of cables and adapters.

• How to connect by Satellite Pro A300-1LW to TV - only monitors VGA port available

  I want to connect my Satellite Pro A300 1LW to the TV to watch DVDs and videos on the internet.
  There is only a single VGA output.

  I have this connected to the input VGA on TV (Sony Bravia LCD TV) and it displays the start-up screens such as the BIOS, Windows startup screen password but fails when the user login screen.

  The television then shows a message indicating "signal not supported.
  Adjust the PC output '.

  Is the complete list of available interfaces:

  1 x DC-in
  1 x external monitor (this is the port that I use)
  1 x RJ-11
  1 x RJ-45
  1 x i.Link (IEEE 1394)®
  1 x external microphone
  1 headphone (stereo)
  1 x SP/DIF (optical) shared with headphone jack
  1 x 5-in-1 Bridge Media slot (supports SD ^ TM ^ memory cards up to 16 GB)
  Stick® up to 256 MB, Memory Stick Pro ^ TM ^ up to 2 GB, MultiMedia Card ^ TM ^ to the top
  to 2 GB and xD-Picture Card ^ TM ^ up to 2 GB)
  1 (shared with a USB port) x eSATA
  4 (2 left, 2 right) x USB 2.0 (USB Sleep-and-Charge of support)

  Have you tested when laptop is not connected and that Vista is fully charged?
  I mean start your laptop and wait for Vista to be fully charged. Cannot connect to the TV, then use the FN + F5 key combination to have the image on the TV.

  It works correctly?

• How to connect my Satellite A200 with LCS Philips TV?

  Hi, I have problems to connect my Satellite A200 1E1 with a PF9967D 32 Philips TV LCD HD ready.
  Manuals recommend an HDMI extension that is unfortunately not available with my laptop.

  However, is possible to use an S-Video connection instead? I could accept a lower quality. When I connect the laptop with the TV, I feel that the Satellite doesn't send out any signal. The combination "FN + F5" does not have the ability to switch between screens. Once, I connected a projector and had no problem at all with switching between the video-projector, computer screen or both.

  Any comments would be much appreciated, thank you in advance.

  Hello

  In the user manuals, it is written in almost each of the chapters on ports or machines slot a short comment: depending on the configuration. This means that this s manuals can be used for different laptop A200 models.

  Each laptop comes with optical disc drive HD-DVD also has an HDMI port. According to the specifications of the laptop, your laptop has no ODD of HD - DVD, and because of this, there is also no HDMI port.

  There sonly a S-video to TV-out port. Using this port you can send the video signal to your TV. I have too many LCD TV and I have used it several times with my laptop A200. It's very simple, but make sure you use the right channel (S-Video) on your TV. Using the FN + F5 key combination, you can switch to the TV.

  If this does not work you are doing something wrong.

• How to connect by Satellite P300D to LCD TV

  Hello

  I'm new to the forum and hope I'm in the right place.

  I was tearing my hair out trying to connect my Satellite P300D to my LCD TV.
  All connections seem ok and the wallpaper appears on the TV but nothng else

  No slider, icons or anything else from my screen.
  When I click on identify a 2 is displayed on the TV to show he is recognized, but I can't go any further.

  Someone at - it ideas?
  Thank you

  > All connections seem ok and the wallpaper appears on the tv but nothng else,.
  For me, it looks like you have extended the Bureau for the second monitor.
  This means that all the icons will remain on the primary monitor (laptop screen) and you get another screen extended desktop.

  Click view properties, mark the second screen (external monitor) and disable the option; extend my Windows desktop to this monitor.

  Usually, you use only FN + F5 to switch to external monitor

• How to connect by Satellite A100 wireless

  im a beginner here... can someone tell me in simple terms how to connect wireless... my knowledge is limited so be nice thanks a lot

  First of all; are you sure that your laptop supports an internal Wlan card?
  On the other hand; simply activate the WLan switch on the side of books, then use the FN + F8 key combination to select the WiFi network.
  Configure the WLan settings either in windows help or 3 rd party software as Intel ProSet or Atheros WLan Client utility.

  For more information look in the forum ;) there's enough discussion on this topic

• How to connect by Satellite M105-S3084 on TV?

  I have a Satellite M105-S3084 equipped of XP SP-2. How can I connect to a TV so that the image appears on the TV? I looked at the manual and it doesn't have a description of the ports on the back and sides of the laptop, or it identifies not what kind of cable I need.

  In addition, special precautions or settings I have to do? I used it with a digital projector, but it was a different cable installation.

  It is placed on the left side S-video port. Use an S-Video cable and connect it to your TV. Please note that this will transfer the video signal only. For sound, you must use headphone output port.

  I put t know not in what country you live but make sure laptop and TV have the same setting (PAL or NTSC). Also, be sure that the S-video TV port is successfully activated.

• How to connect by Satellite 1800 400 on TV?

  Hello
  I want to connect to my Toshiba Satellite 1800/400 on my TV, but I don't know how to install a secondary graphics card. My graficscard is a Trident Cyberblade Ai1 video accelerator.
  Please help because I get hopeless and frustrated because I need for school

  Hello Kevin

  As far as I know you don t need to install a secondary graphics card. The laptop got the output video output jack to transfer NTSC or PAL data to external devices (TV).
  If you want to activate the TV-out function, please go to display properties, and then click Advanced. Now click the device tab to display.

  There you can set the parameters on television and in the multi-screen TV/LCD devices section. Don t forget the TV Standard (PAL or NTSC).
  However, with the FN + F5 key combination, you can choose between the LCD and TV.

  Good bye

• How to connect by Satellite 5100 via WIFI?

  Hello

  I'm new here.
  I have been searching for an answer days ago and would love to find it here

  I was wondering if it is possible to connect my laptop Satellite 5100 503 via wireless and how it is possible?

  Hey Buddy,

  Is your Satellite 5100 already equipped of wireless network card? As far I know THAT WLAN is an optional feature not available on all laptops. If so, you are only looking for WIFI networks within range.

  If you don t have built in WLAN card you can use a USB WLAN key for example. These sticks are cheap, and then you can go online too. :)

  If you have any other questions, please let us know!

• How to connect by Satellite C660-26Z to TV?

  My laptop Satellite C660-26Z doesn't have a HDMI port plug,
  so, how can I connect a laptop cable to use my TV screen.

  Maybe, I need to use decision-making (VGA) port external monitor on my laptop with a special connection cable? Let me know, thank you, Terry.

  Hello

  It depends on the available TV ports.
  Check the ports that are supported by the TV. Recommend to read also the TV manual for more information on the available ports.

  Fact is that this laptop supports just a RGB (VGA) output port. No HDMI or DVI port is available. So you can use just a VGA cable
  Now the question is which port can be used as part of VGA cable.

• How to connect by Satellite M115 on TV?

  Hello

  I have a Toshiba Satellite M115 s3094 and I m trying to connect it to my TV. The TV I have only composite a and ports SCART (it s an old television set). I managed to connect it via the s-video connector, but I have no sound on the TV and it s also in black and white.

  How can I get color and sound? Any help would be much appreciated.

  Thank you.

  Buy this http://www.svideo.com/svideorca.html
  or a solder regardless - it's simple.
  More info on http://www.digit-life.com/articles2/radeon-tv-out/