How to connect remotely to a machine that has multiple monitors (2)
Just to make sure that the machine that I'm connected to 2 monitors.
This can only be achieved with the two computers (client and host) running Windows Ultimate or business. They can be either at each end, but if you're Pro or Home it does not work by default.
Tags: Windows
Similar Questions
-
How to remove a virtual machine that has lost the storage
Hello
I want to remove the drive a virtual machine that has lost its storage. This storage kept OS files and so on. The problem is that because it is lost I can't access most options since they are grey (eg. delete disk). I can't get out of the inventory, but I want to remove it completely. It is impossible to recover the storage that was missing. What is a way to remove it?
Thanks adavance
It's because everything else for the virtual machine has been wrapped in storage.
-
Hello
in our society, we have an old domain controller has been disconnected for more than 200 days, probably in a State of thumbstone, it still appears in our network. We wanted to know what is the best way of disused this server, we connect to our network and do normal downgrade process.
How do you decommssion a domain controller that has not been on the network of more than 200 days?
Could you please write me back to my work email or call me on my work phone? Job information are below.
Hello
The business support, you can find forums on TechNet, see the following links:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Hi all
My colleague was trying to extend a hard disk of a server 2008R2 who (1) had a snapshot and (2) was being replicated. The operation has failed and they took the snapshot replication can be stopped. Long story short when I got to him, the server could not be configured for replication and could not extend the disk and a vMotion failed.
Looking at the files of the VM on the data store and the VMs .vmx file we have all the characteristics of a virtual machine always configured for replication of vSphere. If you try to configure replication vSphere causes an instant error "vsphere replication does not support change the length of a replicated disk. After a few changes I can reconfigure vSphere new replication, however, when the wizard has finished, I get a new error message (see below):
"Try to set up vSphere that replication has failed for the VM"name vm"during the creation of groups"vm". There is a virtual "vm-name" machine that has the same instance UUID ' UUID of the Virtual Machine "that you want to configure. The existing vSphere of replication is configured for site protection.
A possible solution would be to reset the database embedded VRMS our DR as suggested here
site server but I was wondering if there is another solution? I have not reset the database of VRM before and cannot find a document that tells exactly what to do. I guess I need to stop all the rehearsals before resetting the database?See you soon,.
Dean
Hello
There is no need to reset the VRMS database.
If you know the value GID... an orphan replication, you can use the CROWD VRMS (https://vrms_address:8043/mob/?moid=GID-...&vmodl=1) to call the destroy method - it is eliminating simple replication to the site of the source or the target.
If you don't know the GID... value, it can be found of VRMS DB or log files. Please file an SR for assistance.
This procedure is already documented in internal KB articles and help using VMware support:
KB article internal 2056086, section "cannot replicate virtual machine as there is another virtual machine with the same UUID instance"
and also internal KB article 2060751.
The admin guide section will be updated as it is confusing right now by suggesting only to reset the DB.
Kind regards
Martin
-
I can clone (clone full) a virtual machine that has snapshots of Vcenter.
Hi gurus,
Can I clone (clone full) an of Vcenter virtual machine that has snapshots.
Kind regards
Kamlesh.
Hello
Yes, you can clone the virtual computer.
But your new virtual machine (the clone) will have none of the snapshots of the source of the VM.
This will be just a version of the source running.
Tim
-
Hi, I have a PDF form that has multiple check boxes. Some boxes have values (off, yes) that others have just (Yes). How can I get the 'Off' the value assigned to all the other boxes as well. Any help is greatly appreciated.
'Off' is the default value of any box when it is not checked. It can not
be changed.
-
How to connect to a virtual machine remotely.
How to connect from my PC (windows xp) homepage to my PC(windows xp) desktop with a virtual machine.
I want to connect to this virtual machine from home. How to do this? What are the steps?
Thank you.
Hello
When you configure the virtual computing, r put his network card to use the host adapter.
In this way, the virtual machine will get the IP address of the router and will basically act as if the Chickadee is an independent computer in the network.
As long as the host computer and the virtual computer on and don't go to sleep, you can connect to each on its own through the network.
or on the Internet.
http://www.Microsoft.com/windowsxp/using/mobility/getstarted/remoteintro.mspx
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
How to connect remotely to Oracle Db to a network system
I am building a VB application that uses data from an Oracle Db. application works correctly on the Local host, but I need this same application on a computer on the network and connect to Oracle remotely is the problem! I used following code to connect to the same system that Oracle is installed:
Dim oradb As String = "Data Source = (DESCRIPTION ="_
+ "(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST=LOCALHOST) (PORT = 1521)))" _
+ "(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME=ORCL)));" _ "
+ "User Id = glogo; Password = lion; »
and it works well... on a remote system, I use following code:
Dim oradb As String = "Data Source = (DESCRIPTION ="_
+ "(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST=*GLOGOPC*) (PORT = 1521)))" _
+ "(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME=ORCL)));" _ "
+ "User Id = glogo; Password = lion; »
Where GLOGOPC is the name of the hosting system my Oracle Db. Yet, I can not connect to Oracle!
Someone HELP...
Edited by: GSun March 15, 2011 08:02Hello
What is the specific error ORA-XXXXX you receive when it is unable to connect? This will give you the index on which parameter is incorrect. You have other machines that connect to the database even when the connection descriptor has been set using local naming resolving to a tnsnames.ora file, check that the settings in this file and validate that they are correct or contact the ADMINISTRATOR of the target database and check the host name, port and service of the target db name.
HTH
Jenny -
How to unmanage a virtual machine that has been in service of the vRA
According to the subject line, I'm looking for a way to unmanage a virtual machine that was put in service of vRA without destroying it.
I tried adding "Unregister (Machine)" element of the right action, but it did not help.
Have a look here: VMware KB: remove a VM management VMware vCloud Automation or Automation vRealize
-
Adding a virtual machine that has been previously saved
Hello. I backed up a virtual machine that was running in an ESX (ESX n ° 1) and transfer all of its files in an a different ESX (ESX No. 2) data store. How should I add this VM in the new ESX (ESX No. 2)? I'm not using vCenter, I connect directly to the ESX Server via vSphere Client.
The only way I found to do this is to create a new virtual machine in ESX No. 2, and when I add the new hard drive, I select the old VM hard. But this process is not so clean. For example, I read that if I used vCenter I'd be able to disconnect the server ESX n ° 2 of my datacenter and plug it back again, and when I do he added all the virtual machines that are within its data store automatically. The problem, as I said, is that I'm not using vCenter.
Thanks in advance.
Warlock.
Once you access the data store and find the files, you can simply right click on the VMX file and select "Add to inventory." This will allow you to add the virtual machine to your host without manually creating a new virtual machine and pointing to the existing VMDK file.
-
I tried to connect my iPhone 6 with the latest iOS with the bluetooth in my car.
Previously, he managed, but due to problems matching, I clicked on "forget this device" to try to solve this problem, but now my iPhone doesn't recognize my car bluetooth connection. My car well that still connects to devices of others, is not about my car, it's the phone.
Please help me, it has been like that for months and I would like to plug not only for music, but if I can answer the phone calls safely while driving.
Advice or tips would be great. I've tried almost everything!
Much appreciated,
Sarah M.
HI Sarah...
See if there is something that you haven't tried here > get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support
-
Apply an XP image on an identcal machine that has a factory installed Windows 7
I'm trying to apply a picture XP on a computer that has Windows 7 preinstalled at the factory.
I created the image of xp on the same machine using an operating system XP from the same factory.
I found all the necessary drivers for the hardware, installed all the additional software, Sysprep, started in WinPE on a USB key and captured the image of the C drive.
When I try to apply the image on another machine, I get BSOD.
Before I apply the image, I run diskpart.exe to "Clean" the hard drive, create a primary partition, make active, assign letter = C, then format it with fs = ntfs/Quick.
I tried to use bootsect/nt52 C: on that as well... .no luck there...
I ran out of thoughts, one way to solve this problem... I need your help.
The BSOD is a stop 0x0000007B which I think is a mistake of mass storage... but given that these are accurate machines, why would there be a difference in the captured image?
sigh... found the problem.
I forgot the machines come from the factory with the BIOS SATA 'Raid On' setting that must be set to the ATA.
Changed the BIOS setting and everything was fine.
-
How can I retrieve my documents content that has been removed by a virus?
original title: how DO I GET inside MY DOCUMENTS, PHOTOS AND PROGRAMS what has BEEN REMOVED BY a VIRUS?HOW CAN I RETRIEVE MY DOCUMENTS. MOVIES AND PROGRAMS THAT HAS BEEN REMOVED BY A VIRUS?
HelloYou can read the articles below and check if that helps.
How to recover a lost Word document
http://support.Microsoft.com/kb/316951How to recover a lost in Word 2007 or Word 2003 file
http://support.Microsoft.com/kb/827099I hope this helps. -
How to rename an index.htm file that has a different name?
Hey everybody,
It has been long since I was on a forum like this and it's been about 6 years I used RoboHTML regularly.
We will generate our WebHelp (RoboHTML 7) helps. All of our projects usually index.htm (index_csh.htm and index_rhc.htm) as our main index files. However, the project I'm working on that has .htm < productname > and < productname > _csh.htm < productname > _rch.htm. The developers call the files index.htm, so I need to rename these three files in return. How can I do this?
TOCA7
Enter index .htm in the first field of the first window of the wizard to generate.
Good luck
Leon
-
How to remove unnecessary updates of Windows that has gained almost 30 GB of space on the C drive
How to remove the unnecessary window update which has gained almost 30 GB of space on drive C?
Hi Manoj Kumar Nicolas Cichelli,
Please see the thread with a similar problem and fix possible:
In addition, please see the following article for more information:
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
I hope this helps!
Maybe you are looking for
-
Firefox has a Patch or a program to replace Silverlite for Netflex?
-
Qosmio G10 to the HD TV connection pointers
Hi all I just got a flea market G10-100 which is forming the basis of my entertainment system.I understand the Q10 is able to process and the HD video out and have read the forums, trying to figure out how to connect the G10-100 to my HD TV. I'm afra
-
Satellite P200 - where can I find the SATA driver?
Hello Sorry, I'm new here. I also have a SATA for my Satellite P200 (PSPB3E) driver for XP on my hard drive (for installation).Where can I find a driver with ini? Greetings ralf
-
Pro keyboard Lenovo Yoga 2 part number
Sorry if this isn't in the right area, first post and I tried searching the forums for the answer. I am looking for the part number of the keyboard Lenovo Yoga 2 Pro. THX. Comment to Moderator: He moved to you.
-
How can I disable the Touchpad on my HP Pavilion g7-1260us Notebook PC mouse? Works on Windows 7.