Qosmio G10 to the HD TV connection pointers

Similar Questions

• Qosmio G10-105: the screen is black

  I was asked to look at a Qosmio G10-105 by a friend who claims that it functioned very well until one day "the screen went black.

  It seems to start fine but there is absolutely no image on the screen with backlight, no and no image "Dim". The problem is that when I plug in an external display there is also no image at all however becomes the external display backlit, but that's all.

  Can I assume that this is neither the inverter, backlight screen or I get no image on an external display?

  Is it likely to be the graphics card? If so, is it replaceable or it is part of the motherboard?

  I tried 2 external displays

  Any help / ideas would be appreciated...

  Thank you
  Rob

  > Is it likely to be the graphics card? If so, is it replaceable or it is part of the motherboard?
  Hmm. It really looks like a graphics card problem
  It was a good idea to connect the external monitor to check if the same problem would appear on the second screen that there is a simpler way to find out if this problem could be linked to the TFT screen or the graphics card.

  The GPU chip set on the motherboard and in most cases (in your case too) the whole motherboard must be replaced :(

  Unfortunately, but it looks like an expensive affair :(

• Video error on Qosmio G10 since the new software

  Hello world

  I have a problem with my MCE LiveTV. When I want to watch live TV, then always comes this error:

  "Error video - files neede to display video are not installed or not working not properly." Please restart Media Center or restart the computer.
  When I follow this order, nothing changes.

  I have this problem since I installed new software on my Qosmio G10 yesterday. It's called Magix Video deLuxe 2005/2006. When I uninstalled the new software, Live TV still does not work.
  It only works when I have sett my computer back to the time where I have not yet installed Magix Video deLuxe. But then I can't use the new software.
  I also tried to reinstalled the video driver and the TV Tuner, but the error is still there.

  What can I do now? Please help me

  I would say that the software that you install is not compatible with Windows MCE. It is possible and the cause likley. If you have all updates for windows and Magix Video and it still does not work then the problem is with the software application and the no compatibility. The fact that it works before and after roll you back OS proves it.

  What are you actually trying to do with the Magix software that Windows can't do?

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• Qosmio G10 134: the screen freezes after repair

  Hello

  Earlier my Qosmio G10 had to be repaired because of the vertical-bars-in-screen-and-broke-down-videocard-problem. They gave me a new motherboard and Nvidia Go 6600 and the problem was solved. I hoped... Because then I couldn't not to use the graphics card for more than 5 minutes.

  When I start playing a game, or so it takes 5, maybe 10 minutes in mind for my screen to freeze. Then precious is unresponsive to anything, even to the Microsoft-Magic-Combination-Ctrl-Alt-Del. very annoying to say the least... Does this sound familiar to anyone?

  Thanks in advance,

  Dave
  The Netherlands

  Hello

  I agree with the agramer. It is possible to s that you got different but better graphics card. On this page, I read that some users who repaired the laptop got a different card because the original of the delivered graphics card was off live.

  In this case, you should check your device for details of the map Manager and if necessary, you must install the right graphics card driver.

• Qosmio G10-166 - the cursor blink, but I can't do anything

  I received a G10-166 with a broken power connector. The laptop had no disks or a battery, I made a temporary solution and the portable lights only problem is that after the load screen where its Qosmio, then said to the screen where the icons are the following has letters everywhere. I can see the cursor blinking, but I can't do anything with it.

  I tried to access the page of the BIOS pressing F1 but nothing just this screen with the strange letters on it. Also I don't know the history of the laptop so any ideas what is wrong I want to get the job of the laptop?

  Hello

  You can access the BIOS if you press ESC I n know why you try F1?

  You have installed a new HARD drive now? If so, you should check if the HARD drive is recognized correctly in the BIOS. If so, you can start with the installation of the driver because the new hard drives are empty then the cursor blinks and nothing happens.

  Simplest is that you use the Toshiba recovery disc because it contains an image of the settings from the factory with all the drivers and tools. Just follow the instructions of scree and Windows will be reinstalled.
  Alternative, you can also take a Microsoft Windows disk, but you will need to download and install all the drivers step by step.

• Qosmio G10-133: the blue lines on screen

  To all those who can help you:

  I turned on my Qosmio yesterday to find a series of unwanted blue lines, distorting the Qosmio logo. Lines and distortion continued until the operating system came at the opening of my office. At this point the whole system locked and the screen went completely blank.

  The Qosmio player suffers from the same problem. The boot system, but crashes when the display is asked to do something.

  I can open the operating system in safe mode, but the lines still appear to a lesser extent on the screen.

  I have run all the tests and has been through the manual troubleshooting section. I tried to reinstall the drives and roll back to the previous facility. But, for all that I try, nothing will change.

  Qosmio my friend did exactly the same thing a month or two it is a. Solution from Toshiba was to replace the motherboard.

  My Qosmio is still under warranty, and I am very happy to send it because Toshiba has one of the best customer service I've had to face.

  But, I was wondering if anyone had any ideas?

  Thank you very much.

  Hello

  I also very pleased with the customer support service Toshiba m.
  I think that the simplest and the best way to resolve this weird display problem is to bring the unit to the ASP. Laptop you is guaranteed to be protected and a replacement is free.

  Good bye

• Qosmio G10-133 & Vista can't recognize my memory stick

  Hello

  I installed VISTA on this laptop, and I had a few problems that you can imagine!

  I can't recognize my memory stick. I can't find the drivers and that Windows is unable to solve the problem.

  Someone got clues?

  I'm also having a problem if I turned the laptop off. The only way I can get the power on button to work is to remove the power cable and the battery and then I turn on the laptop. If I don't take the power cable and the battery I get the green light on the power button, or no light at all, and by pressing seems to do nothing. I also have an orange light blinking on power light on the front of the laptop. I guess it's something to do with the thought of the computer it has hibernated or something?

  What to say to boyfriend.
  The Vista is not officially supported on the Qosmio G10 and the Vista drivers don t series there for this series.
  Always is it that you need a card reader driver to use the memory sticks. But as I said above, these drivers are not available and don t exist.

  What you can do is to check the drivers for G30 but I'm very skeptical that it will work on the G10.

  Good bye

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• The Qosmio G10 DVD burner replacement

  My DVD burner was unable to get out and must be replaced. It is a UJ - 831S. I bought the same one, but I got an error of CD-ROM at the beginning upward. I tried this new CD-ROM on another laptop (Toshiba Satellite 2800-300) and it worked fine. I think I have a problem with the configuration of my DVD burner (c - select, master...). Do you know if can change the firmware of my DVD writer?
  Thanks in advance,
  Alain

  Greetings Alain,

  Yes, the problem here is the ID of engraver of DVD (CSEL) UJ - 831S. You must have the carpet * a DVD burner connected to the secondary IDE Atapi port as a master flash.
  Probably your G10 is recognizing as an oucederomsurlesecondport IDE IDE slave secondary.
  Unfortunately there is no firmware to change the internal Atapi drive ID.
  You can ask Toshiba for the firmware, but I think that they will not give him to you.
  The best thing is to share the UJ - 831S for the carpet * 831B - UJ part number: P000409790 Qosmio G10 model: PQG10U-00Y00L,.
  Please confirm first if your G10 model.
  When you go to the Exchange, please ask them to first test the DVD player. Better not make mistakes, here.
  All of these discs are Panasonic (mast * one) corporation.

  Good luck
  Francisco

• Problems of sudden wireless connectivity with Qosmio G10

  I had a Qosmio G10 for almost 3 years now, and at least WRT my wireless connection, everything was fine until a few weeks ago.

  Little by little I started to lose the ability to connect to a WLAN after getting out of the mode standby (Win XP MCE): the computer wouldn't connect to my WIFI and would keep erratic jumps among the various wireless networks available in the neighborhood, without connect because they are all fixed.

  Initially, the problem could be solved by restarting the computer and the router.

  Now even that no longer works. I see either all local wireless networks, including mine, without being able to connect, or I see no WLAN at all.

  Windows status bar icons both ConfigFree show the small red cross and the system didn't budge. When I see available wireless networks, I'm trying to connect to my own, but then the computer attempts to connect forever. If I order for Toshiba ConfigFree * _For unchecking the checkbox in the properties window_ wireless * and I'm trying to connect manually my WLAN to the computer by dragging a link the said application to another provider program is in control.

  I have tried everything that came to my mind, the repair connection, enable/disable WZC, install new drivers for the Intel 2200BG, install the new version of ConfigFree... There is obviously some kind of conflict, but I do not understand what it can be.

  I don't know what else to do before decide to reinstall new Windows (oh dear oh dear). Moreover, my ADSL Modem/Router is always the same. The link has been dealt with by WPA/TKIP. Everything works fine with the other 2 computers and a phone with WiFi.

  Said by the way and quite surprisingly, a member of the family in another country began just having exactly the same problem on a Toshiba Satellite A110. In this case, the cause may be associated with the change of a Philips to a Linksys modem/router (either DHCP;) WPA/TKIP unchanged; everything works with another laptop in the same household)

  Can someone please help?

  Why use the CnfigFree tool to connect to the WLan?
  According to your message, you are using the Intel card.
  I would recommend so either use the Intel ProSet WLan client configuration tool or the clean option of Windows!

  > try to manually connect my WLAN to the computer by dragging a link the said application to another provider program is in control
  I assume that this error message is displayed because the ConfigFree is always chosen as tool to configure the WiFi network.

  However, the new installation of the OS may not be bad idea due to the fact that everything would be set up again.

• Qosmio G10 - how to upgrade the DMI information?

  Help, please!
  I have trouble with Qosmio G10. Toshiba support don't really.help me.

  I changed my motherboard with nVidia 6600 go and 915 PM and new BIOS. Now there are several problems: I tried to run the update tool CD, but it stops and «please use this CD with F10, G10...» Press any key to stop. I can not run product recovery, bad Machine.

  OK, I thought, this Forum search and found that there must be something with DMI. Download Toshdmi10.exe and run it on a bootable CD but the ID does not match!

  Now, I installed XP-Home Edition without recovery of MCE, but it seems that he's in trouble, because the laptop works single fix 598 MHz and has 45 Watt idle Powerconsumentation! It's a lot more before I think. Too much?!

  How can I solve the problem-DMI to run Update tool and recovery CD?

  Hello

  Normally the DMI information can only be updated from an authorized service...

  You wrote about a new mainboard is the same as older mainboard? Maybe the new chipset and graphics card are not compatible with the other pieces of equipment

  In your case I would contact the ASP again. Normally, they should help you if you explain your problem exactly. ;)

• Qosmio G10: windows from the CD recovery

  If I restore my Windows from a CD that was given with my Qosmio G10, I lose all my files?

  Hello

  Yes, you will lose all your files. If you perform a new installation, please use the expert mode and you'll be able to create two partitions. On the first, you need to install OS and the second that allows you to save all your data.

• Install the Qosmio on Qosmio G10-120 player

  Hi all
  I can not install on my G10-120 qosmioplayer.
  I downloaded the driver from the Toshiba C.S.
  When install it from the CDROM and I choose 1 to 'Recover' to the initial state install displaies 'lack of free space on the HARD drive... ". ».
  My G10-120 has two HARD drives and I have unallocked 1200 MB in the second with the pgm of the "magical" partition
  How can I install it? who can help me? Thank you.

  Post edited by: guer

  Hi quer

  As far as I know the HARD disk (by Qosmio G10 first HARD drive) at least 100 MB of free space must be available. This free space must be on the end of the HARD drive and there must be unallocated. Can you please try again but this time on the first HARD disk?

  Partition magic is the ideal program to prepare the HARD disk for Qosmio player installation. Please let us know if there is some success.

• Qosmio G10: Breaking news - good news for the capture!

  I have a Qosmio G10. I live in Australia and bought the laptop here. I like to keep things so far and was analysis Australian Toshiba site when I came across a special update for owners of Qosmio here the link

  http://www.ISD.Toshiba.com.au/cgi-bin/AI1.exe/topic/content/driver_search_list.jsp?BV_SessionID=@@@1490231535 .1109544574@@@&BV_EngineID=eaddckkmlflebfdhcjkcfg ldkf.0 & theAction = true & CATOID =-15058 & MODE = NPRO & ProductMenu_0 = Notebooks & ProductMen u_1 = Qosmio & ProductMenu_2 = 897343 & x = 21 & y = 4

  I am still trying but install and use WinDVD creator I can choose to capture of S-video, Composite video or TV tuner. Maybe it's just that we all waited. You can change the quality settings as well. I looked on the site of Toshiba international and can't find it. In any case I hope this works for you all. There are a few release notes for the utility on the page as well. Good luck!

  Hello

  Thanks for the info. :)