How to connect this 7 ports USB 2.0 Slim Hub

Similar Questions

• Satellite A200: How to connect a parallel port printer?

  Probably a very stupid question, but I would like to connect laptop series A200 on a parallel port printer that does not have a USB port... What is the best option?

  Hello

  You ask the best way?
  Well, you have only one way?

  You need an adapter USB to parallel. Check in google for certain offers.
  I searched in google and found some good options.

  Perhaps this might be a good choice;
  http://www.ramelectronics.NET/HTML/usb_printer_cable.htm#UP6C

  Best regards

• How to connect Labview to a USB sensor without existing driver?

  Hello

  I'm currently trying to a pressure transducer Omega PX409 USBH will display a reading in Labview. The transducer is USB connected, and the software that provides the Omega shows a reading and therefore indicates that the sensor is connected to the computer. However, it is not recognized by Labview or NI MAX. Although the pilot NI VISA Wizard recognizes the USB connection, it I cannot install the INF files that it generates on my computer. I'm pretty stuck on how to proceed in order to write a driver that displays the data in Labview. Any help would be appreciated!

  malsko15 wrote:

  Yes, I have updated the drivers FTDI and am able to contact my device via Hyperterminal. How can I integrate Labview into that?

  Well, you have your hardware tested and working, half the battle is won.

  Series communications are quite simple in LabVIEW using VISA.

  Here is a small example of how to write and read from a serial device.

  

• Smartphones blackBerry how to connect the serial port (SSP) to a PC?

  I try to connect my BB (8310) to my pc using the port profile series bluetooth with my old phone (sony ericsson w300i) would just pair the phone with the pc and then the pc would discover services on my phone and I woluld double clicking the port icon series, but when I explore the services BB I only have handsfree and dial-up networking , I know the phone supports the serial port because I checked in the bluetooth options, and it supports the connection to the serial port.

  Thank you.

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04132&sliceId=1&docTy...

  proceed as if you want to sync via bluetooth

  If you just want to transfer files, stop after completing step 5

• 6009 USB + encoder Lika I41 - how to connect?

  Hello world

  I'm new to this forum and I'm new to Labview so. I started to learn a few weeks ago and I have to solve a few problems. I am not able to come up with my own, and that is why I ask. I went through very simple LabView courses and now I'm in more serious trouble.

  I have first - the NI USB-6009 device and an incremental encoder Lika I41-h-500ZCU46L2. He has 8-cable and is described here: http://www.lika.pl/pliki_do_pobrania/QR%20I28_I40_I41.pdf . And now - I know the basics on the encoders so the description of cables is understandable to me. I don't know how to connect it to the USB-6009? I need to do a VI that will count the pulses and the output of the camera each X impulses. But I want to start by counting pulses.

  Any help will be MUCH appreciated.

  P.

  Hi you can connect power 5V to encode. Connect to the encoder output to PFI0 encoder for the event USB6009 GND GND line do VI count on PFI0 and USB6009.

• How to connect weblogic 9.2 with LDAP Port 636 (SSL Enabled)

  Hello
  
  We are currently connecting the weblogic administration console to LDAP using the port 989. Can someone tell us the details on how to connect Weblogic to Port 636 (SSL enabled).
  Requires you to install certificates of security for the same thing?
  
  Thank you

  Yes, the certificate will be provided by the LDAP Service provider.

  Check the SSL Configuration of the Weblogic Server.

  If using demo identity and demo trust, import the following

  keytool - v-import - alias ldapcert - keystore DemoTrust.jks - cert.cer - storepass DemoTrustKeyStorePassPhrase of the file

  If its custom identity and trust personalized, use the command below

  keytool - v-import - alias ldapcert - keystore cert.cer .jks-file - storepass

  Hope this helps,
  Faisal

• How to connect the Satellite Pro P100 to Hifi

  I've got Satellite Pro P100. How to connect this laptop to stereo
  It's probably easy, but what I can say... Call me stupid.

  I have head that comes out of the headphone jack, it connects to my friendly hifi.
  Ill be there is a unpleasant hissing in the background. Trying to hook up my boys in head mp3 player, and that works very well.

  Any chance of some help... Thank you

  Hello

  To my knowledge, you can connect the satellite Pro P100 to HiFi only via a cable 2 RCA Audio Y adapter. To my knowledge the laptop doesn't support the S/PDIF audio output so you only to use an analog audio port.

  You can also buy a stereo adapter with 2 x cinch sockets to connect the laptop to the stereo. This card can be plugged into the headset jack

  Check this box:
  Stereo adapter

  I think you should visit the nearest dealer of portable. It can show you the right and taken in charge of cables and adapters.

• Q. G20-117: how to connect to a digital antenna (DVB - T decoder)

  Hi everyone, hope you can help me with some tips and tricks to connect the Qosmio G20-117 computer to a digital antenna (DVD-T set-top box) from Samsung.

  The problem is that the connection with the coaxial cable is really very bad, so I'm wondering how to connect this receiver with a cable SCART original...

  Thank you!

  Erik

  Hello

  As far as I know original SCART cable can be used just for the signal and not the signals in. In my opinion, you must connect the external device to your Qosmio use composite cable. Check it with Qosmio player. Scan of the channels and a single channel should be based.

  Good luck!

• "This USB mass storage device can transfer information faster if you connect it to a USB 3.0 port Superspeed ' when the device is already connected to a USB 3.0 port.

  I just bought and installed a USB 3.0 card. It is the Startech PEXUSB3S2 PCIe card. I installed the card in a PCIe 2.0 X 1 slot. The manual says it's exactly the slot, that it supports.

  The Manager device displays NEC Electronics USB 3.0 Host Controller and NEC Electronics USB 3.0 Root Hub are installed and are working correctly. I have a Thermaltake BLACX5G 5 G USB 3.0 hard drive caddy. The transfer rate is only 35 MB/s using the HDTune benchmark. It is a USB 2.0 speed.

  When the player is turned on, windows displays the message "this USB mass storage device can transfer information faster if you connect it to a Super speed USB 3.0 port»

  For some reason, the system doesn't see the caddy to drive USB 3.0 as being plugged into a USB 3.0 port, when it actually is.

  I remember having this same problem with Windows XP, when I bought a USB 2.0 card. The only thing that fixed it at the time was upgraded to XP SP2.

  This should not be a problem because I know that Windows 7 pro 64-bit supports USB 3.0.

  My motherboard is an ASUS P5QL-EM support an Intel Core 2 Quad and 4 GB of DDR2 memory. According to the manual owner the PCIe x 1 slots support architecture 1.0 and 2.0.

  Edit: I just tested the external hard drive and expansion card USB 3.0 on my motherboard Gigabyte of friends running Windows XP. Everything worked perfectly, no problems at all.

  Here, there is a problem with Windows 7 or the motherboard. Still unresolved, currently installs a floppy drive so I can update the firmware of my motherboard.

  I checked the implementation of the card several times, removed and installed in another motherboard to test, then removed and reinstalled again in my motherboard ASUS check several times for a fit course.  It still does not work. I have just completed update the firmware of the motherboard with the latest version, and I also did a new install of Windows 7, install the drivers USB 3.0 immediately after installing Windows over. None of this solves the problem.

  I'm running out of ideas on how to fix this without doing something drastic as a replacement for my motherboard. I don't want the speed of USB 3.0, but I don't think I'm ready for an another two or three hundred dollars to get it.

  I've been all over the ' net trying to find a solution and read tons about USB USB 3.0 specifically and in general. I can find no reason why the drivers would install and report that they are working correctly, but fail to connect to 3.0 speeds. I think that this would generate a certain type of error instead of such a strange symptom.

  EDIT:

  Here go us. I knew that is was a bad idea to buy one main (ASUS P5QL-EM) card that had to be overclocked to 1066 MHz for DRAM memory. I did all this work, and every time I reset my BIOS or updated it would always be the frequency DRAM back to where it should be (1066). After a reset of the computer was the starter and I just let it start instead of setting the DRAM frequency and, suddenly, USB 3.0 card worked perfectly. I confirmed this by setting the frequency to 1066 and looking at the USB 3.0 card fail again. I guess it must have something to do with the clock being sent to the PCIe bus.

  In any case, the USB 3.0 card works perfectly and gives me a transfer rate HD Tune to 99 MB/s on a drive from WD SATA 7200 RPM and 86.1 Mbps on a Samsung drive hard 5400 RPM / MIN 3,5 "SATA. These are the same reference points I get when these drives are connected to my internal SATA connectors. I'd say USB 3.o works perfectly now and maxing out the hard drives performance.

  Thanks for any help.

• How I connect my computer thrown up a port usb video cable to my tv

  How to connect my computer to my TV with a usb cable to video?

  Hello

  Follow the steps in this link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  Good luck.

• Connect the Labtop using USB Port of labtop to TV USB Port will this work?

  How to connect my laptop to the tv via the USB Port of labtop on Port USB HDTV Compatible.

  Sony's Connect Via a USB port on the Emerson HD TV

  Thank you

  No, that won't work because the USB port on the computer is not a view of the port and the USB port on your TV does not have a display in the port.
  "Isis08" wrote in the new message: * e-mail address is removed from the privacy... *

  How to connect my laptop to the tv via the USB Port of labtop on Port USB HDTV Compatible.

  Sony's Connect Via a USB port on the Emerson HD TV

  Thank you

• How many ports usb this laptop there

  I want to buy hp pavilion g6 2305tx.but the problem is that it has only 2 usb ports. But I contacted a dealer and he told me that there are 3 ports.is it true? Please give me is hands on the review.and safe to use usb hub in the laptop? Please let know me. Thank you

  Hello:

  According to the below user's guide, Chapter 2, pp 3-5, there is a USB 2.0 port on one side of the laptop and 2 ports USB 3.0, the other side of the laptop.

  http://h10032.www1.HP.com/CTG/manual/c03529460.PDF

  I do not own a notebook of g6 model, so I can't provide any other information on it.

• need a HDMI cable to connect to the macbook pro via port USB - C

  Could someone please indicate what cable or adapter I need to run my MacBook Pro to a TV movies? It connects on the port of lightning or another? Thank you Jude.

  No MacBook Pro has lightning ports or ports USB - C.  Most have ports Thunderbolt, and some have even regular HDMI ports.

  The adapter you need to depend on the exact model of MacBook Pro you have.

  Until we can tell you what cable or adapter you need, you must tell us what model of MacBook Pro you have.

  You can watch in the Apple Menu-> about this Mac, option and after the year of model here.

  How to identify MacBook Pro - Apple Support models

• Satellite M40X-189: how to connect RGB port to port RS232?

  Hello
  as you know the satellite M40X - 189 P - M 730/XP has a port monitor RGP and doesn't have a RS232 port.
  I work with device of automatic titration requiring the RS232 port for connection!
  No idea how I can connect my laptop on this unit!

  pls help
  Thank you
  Omrankl

  Hello

  AFAIK the RS-232 port is a serial port and I don t think that it of possible to connect the RGB port to the RS232 port.
  But I found the site useful:
  http://www.Ontrak.NET/USB.htm

  You will find a description how to connect the USB port to an RS-232 port.
  You need an interface ADU.
  Click on the link.

• How do I know if a 2.0 port usb is high-speed?

  I'm pretty computer, but I don't have the slightest idea how to ensure that the port is high speed. Unfortunately, my top at 54 Mbps Wireless, even if I'm only 60' with a direct line of sight. [Personal information]
  any help really appreciated.

  The motherboard plug for your State to fund it has usb 2.0 ports.

  USB 2.0 was released in April 2000, by adding a higher maximum of signaling called speed of 480 Mbit/s TGV. These ports are usually black or white.

  In 2008, USB 3.0 (SuperSpeed) and it has a maximum ports SuperSpeed 5 Gbps signaling rate. have a SS logo near them.

  In the PC that I use for this type, I have a usb Linksys Cisco 802.11 adapter connected. He's using my router 802.11 KT his internet connection. Even if the adapter and router are capable 802.11 ac, the maximum bandwidth that I see is slightly less than yours, as shown in the following image.  If I connect to the router with a CAT5 cable I see 90 MB/s.