Satellite A200: How to connect a parallel port printer?

Similar Questions

• Satellite A200 - how to connect to the TV?

  Hi you.

  How to connect my laptop to the tv with a S - video Cable Media or VGA - RGB cable? I tried to connect by Fn + F5, but no signal goes out. If I use the VGA - RGB cable + something is comeing out on TV but its streaming.

  Kindly help me...

  Hello

  You can use two cables to connect your laptop to the TV. It s according to the interfaces on the laptop and the TV, but in both cases, it of the same:
  Connect the cable to the laptop and TV, turn on your TV and select the right channel, then turn on your laptop. After the clean boot procedure, you can switch between monitors with FN + F5.

  If you use S-Video cable make sure you are using the coding system good TV, e.g. PAL or NTSC.

  > If I use the VGA - RGB cable something's come out to TV but its streaming.
  What settings did you use (screen resolution, screen refresh rate, etc.).

• Satellite A200-1YW - WLAN connection problem

  Hello

  A few days ago, I bought the Satellite A200-1YW. PC is great, but there is a problem... I have a wi - fi connection in my place and I can't connect to the web. My router has helped my PC go but in my Toshiba I see info «local unique» My network contains 4 computers and only my causes problems. In properties of Protocol 4 of the card is ok, and Protocol No. 6 is limited.

  For more information, please how to fix this problem.

  See you soon,.
  F.

  Hello

  Hmmm. your router supports a range of IP addresses, and it must assign the IP automatically to the computer if the WiFi is enabled and configured correctly.

  You should check the settings of the properties of IP/TCP protocol, which lies in the properties of the wireless LAN connection.
  All parameters as get an IP address automatically or the address of the DNS server to get must be automatically activated a chosen.

  So please check it!

  Greetings

• Questions about the Satellite A200 and TV connection

  I have a laptop Satellite A200 - 1 GB and I tried to plug into a 42 '' Toshiba LCD screen. I have only a VGA connection to TV from my laptop.

  My first question is:
  When I watched a movie I had really big black lines (from the screen). Is there a way I can zoom in on the film I'll have more pictures and fewer black lines?

  Second question:
  What is the best way to connect to the sound?

  Third: Can I use I-link (firewire) to connect to a TV for watching movies?
  Thank you!!

  Hello

  Port VGA specifications was to use and connect an external monitor. Not a TV!

  If you want to connect to the laptop to a TV, then you must use the s-video port that is available too!

  > What is the best way to connect to the sound?
  S-video cable only transmits the video signal.

  If you want to hear the sound on the TV speakers, then you must connect to the laptop to the TV using a [RCA cable | http://www.action-electronics.com/grc/ppmma3.5.jpg].

  Then you connect the TV to headphones Jack cell phone s.

  Best regards

• How to connect the parallel test using the logarithmic function Teststand database result

  Hello

  How can I connect a test result of 4 EHR tested in parallel using the logarithmic function Teststand database

  I use Labview 2013, 2013 Teststand and sequential model.

  The test is performed using a single digital card (SMU-6556). The FSD 4 is connected to the port of the digital map and is tested in parallel.

  Currently at the end of the test, I would have a report with all the measures, but I need 4 reports (1 report / dut)

  TKS

  
  

• Satellite A200 - how to replace Vista with XP?

  I received a Satellite A200, because the owner was heartily sick of Windows Vista which came installed on it. Everything I have heard talk about Vista convinces me that I don't want to have anything to do with it. In addition to my wife - who will use the computer, serves to XP and wants to continue to use it.

  After a day and a half looking for instructions on how to get the A200 to boot from a CD on which SATA drivers required as well as the files of XP installation disc was compiled AND burn 4 CD, I can't always get things working!

  Please... surely someone in the Toshiba Land has successfully dealt with this problem before! Guess I'll try tomorrow, but some help would be appreciated of course.

  Hi spktrm,.

  Yes, you re right and you must integrate the SATA drivers in the XP installation disc. Therefore, you will need to download the Intel Storage Manager driver package that contains this SATA driver you need. Here in the forum there is already an article interesting how to proceed:
  [How to integrate the AHCI SATA driver during the installation of Windows XP? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=38]

  Alternative you can install XP without this driver if you change the HARD drive in the BIOS from AHCI Compatible. Then, you use the normal Microsoft Windows XP disk. ;)

• Satellite A200 PSAE6 - cannot connect my iPhone wireless

  Hello, first of all I am sorry for my bad English.
  It is quite difficult to write in English.

  I have the Satellite A200 PSAE6 with Atheros Wlan.
  I'm trying to connect to my iPhone, but I couldn't.
  When I try the same thing with my other laptop it connect...

  Can tell me what is different or that which is wrong with my toshiba?

  Thank you for helping me.
  Best regards

  Maybe you didn't activate the card wireless network properly or maybe the wireless computer card laptop doesn't support the same WLan standard in the iPhone.

• Satellite P15: How to connect the TV antenna?

  I bought Toshiba Satellite P15 S479with XP MCE, with tips and Tv tuner, and I do not know how to connect my Tv antenna, so I could watch and record tv on my computer. My picture quality is poor, I see tones with lots of "snow".
  What should I do?

  Hello
  As far as I know it must be an American model. Do you use it in the United States or Europe? If you use in Europe is another TV standard (PAL).

• Satellite P100: How to connect to internet via WiFi?

  I read a post above that says that the sticker on the bottom of the laptop ' wireless network: no w/l ' means that there are no installed wireless.
  I'm fairly certain that my Satellite P100 has installed. I customized my phone, ensuring that I have added wireless for the school.

  I have an on-off switch for the wireless on the case. Also, when I entered a zone wireless for the first time, a program (Q-Connect) came.
  I reinstalled Windows XP and wonder if it is a software that is missing (which has been the case with other similar programs audio).

  This could be the operator error?
  I don't know anything wireless.
  How to connect to wireless internet?

  Hello

  First, you must be sure that your laptop has WLan card to 100%. Go to the Device Manager and check the network adapters section. If you will see card WLan (intel or atheros) then you unit definitely has the Wlan card.
  To use the WiFi network, you must configure your Wlan router. Consult the manual.
  You must then activate the Wlan switch on the side of the laptop and use the combination FN + F8 to select the WiFi network.

  For the other steps, you can also check this forum wireless. Here you will find a lot of descriptions.

• Satellite A200 - how to replace the HARD drive?

  Hey, I recently some strange problems with my laptop. I installed a new copy of Windows Vista and also tried with Windows 7 a few times. But eveytime I get problems. The installation of the operating system right. But after I installed some Windows updates my computer becomes very slow and at some point, I am unable to install any application, because it crashes just when installing... This happends with all the big software products such as Visual Studio, 3d Max, After Effects... etc.

  So I think that my HARD drive has a large number of bad sectors. I also tried to erase everything on my drive with KillDisk, but it hangs at 16%. Once again something that seems to be my HARD drive.

  But before you buy a new, I'd like to hear your opinions on my problem and I would also like to know how I have to replace my HDD on a Toshiba Satellite a200. I don't know where it is placed and what parts I need to unscrew.

  Thanks for any help.

  Hello!

  The HARD drive is placed on the underside of the laptop.

  The HARD drive on the underside Bay is fixed by two screws. Remove the screws and the HARD drive. Then you can swap the HARD drive.
  But unplug the AC adapter and remove the battery before doing this.

  The new HARD disk must have the SATA interface.

  Good bye

• Satellite A200 - how to check the temperature of the processor fan?

  Hi all

  I have a Satellite A200 that my teenagers use a little, or abuse a little! Recently, it would not start up. I suspect the fan and pulled out the fan cleaned and tested the fan on a PSU, worked out well. He put it back together, ran startup repair and now the computer is operating normally. The fan is however not appear to come at all. In the Device Manager it tells me it works very well. I'm all good with the mechanical side of the House, but I'm a quamby operating system! How to check the temp CPU or fan?

  Thought that replace the fan but don't want to go that far just to get no results. Currently using the vacuum on low like an external fan and didn't want to just run the laptop with no cooling for fear of permanent damage. Although children watch movies with her on their doona may have already reached this!

  Any advice would be appreciated.

  Hey mate,

  How to clean the fan exactly? It s advisable to use the jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.

  In addition if the fan doesn't work anymore it of necessary to replace. You can order spare parts at an authorized service provider.

• Satellite A200 - how to upgrade the memory?

  Hi, I have a Satellite A200 and want to update the memory. How would I know what to look for when buying? Thank you.

  Hello

  > I have a Satellite A200 and want to update the memory. How would I know what to look for when buying?

  According to the specifications of the product a 200 series:

  You can upgrade to the top to 4 GB ddr 2 (667 MHz)

  Post, exact model you have

  Post edited by: Jeka -?

• On the Satellite A200-1CR wireless connection is not working properly

  Hello

  I have a problem with my wireless connection. In spite of I stay close to my router I can't access the Internet.
  If I have the connection, it is the level of 1 to 3 (5 is best).
  I have the same problem with "hot spot". I can't access the Internet or use only messenger, can't surf the Internet, check my emails, etc..
  Another person do not have this problem in the same places. They can access the Internet. What's wrong? Can you help me?
  I have a Satellite A200-1CR.

  Piotr

  Hello

  For most Wlan issues are related to problems of compatibility between the wireless network card and the Wlan router.
  Sometimes the Wlan driver allows to obtain the best performance.
  So, try to update the WLan driver first. Maybe it helps.

  Good luck

• Satellite A200 - how to install the bluetooth software?

  I got this laptop Satellite A200 of Australia. Recently, he had sum probs, so I restored it 2 factory settings using the backup option by pressing the 0 key... but later, I tried 2 find its Bluetooth software but I have strength c it doesn't matter where... anyone know how to install it or where it is located on the computer laptop d.
  Thank you

  Hmm. are you sure your laptop was equipped with an internal BT module?
  To my knowledge, not any of the A200 series support the BT

  However, you ask the BT (pilot) software.

  Here you are:
  http://APS2.toshiba-tro.de/Bluetooth/

  It is a Toshiba BT portal. You will find the latest version of the BT software.

• Satellite A200: How to find the serial number

  I need to know the ETA of my laptop so I can download the specified drivers...
  Cause when I did my search, there are several version of the SATELLITE A200...
  If anyone can help out where I can find it?

  Thank you!!

  At the bottom of the unit, you will find the label that provides all the necessary numbers.
  You will also find the serial number!