How to create a bootable pendrive NTLDR (Windows Xp)?
I have Windows Xp and Vista and Ubuntu and SUSE. I am the computer program with C and Assembly.I had developed an operating system of my car. I did detect Windows XP and higher, and GRUB. I also did a function to fix the MBR, sector, etc. I tested on my Windows Partition.Then, I rebooted my system and my xp Boot loader is not loading. So now, I want to create a USB key with Windows Legecay Loader(Windows Xp NTLDR) and configure boot.ini and define a partition C to start with the charger on the USB.
Now, I just want to know how to install the boot on the USB Manager.
Also, I want to know how to repair or reinstall the TI back on my partition.
Hello
I suggest you according to the question in this forum and check if that helps:
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
Check if that helps.
Tags: Windows
Similar Questions
-
How to create USB bootable for installing Windows 7?
Hello world
I run Windows 7 and want to reinstall but did not a resumption of discs and missing hard disk image. I got a copy of Windows 7 and tried to make a bootable usb key with WinSetupFromUSB and Novicorp_20WinToFlash programs but without success. Is there another method to do?
The Bios supports the USB key.Thank you
Sorry for my English (I'm German)
Hello
I don't know why you can't make a bootable USB stick with the programs you mentioned. It is very easy. The link suggested by peterk_1 is also useful and can help you.
You can also try to do as below:
1. Insert the USB key which should not be less than 4 GB for Windows 7.
2 run as administrator at the command prompt.
3 type Diskpart and press ENTER, then List Disk and Enter. You will see the disc all available, including Usb flash on your computer. In my case, usb flash is determined as disk 1 in your may be disc 2, so type:If yours is disc 2 you choose select disk 2 (thus, in each order line)
SELECT the DISC 1 press enter
CLEAN, press enter
CREATE PARTITION PRIMARY, press enter
SELECT PARTITION 1 press enter
ACTIVE press enter
FORMAT FS = NTFS press Enter
Note for quick formatting, you can use FS = NTFS QUICK
ASSIGN, press enter
EXIT, press enter
Do not close the command prompt window, disc insert Windows 7 dvd and check what letter is assigned to the cd/dvd drive. In my case, you s F:
So:
Type in F: and press ENTER, then
F:\ BOOTSECT. EXE NT60 H: H;? is assigned to the USB key into your computer, it may be another letter.
Now, you just need to copy all the folders on windows dvd disc. That's all
Alles Gute!
-
Hello
I followed folders in my USB key:Boot
EFI
Sources
Support,and the following files:
Setup
Bootmgr.EFI
BootmgrHow can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
I would be very grateful if someone could help me out here.Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.
Concerning
MAKIf you have the upgrade key, go here
http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media
You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that. Will allow you to have an iso bootable.
Make a picture of the control panel system / Windows 7 file recovery / system Image. I certainly wouldn't put it on dvd. It will be too. Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.
-
How to create the firewall rule for Windows 7 for javaw.exe?
How to create the firewall rule for Windows 7 for javaw.exe? The application path differs from the new versions and user profiles. Is there generic symbols allowed for example asterisk?
Hello
I recommend you to send the request to another Department for assistance:
Security in Windows 7
http://social.technet.Microsoft.com/forums/en/w7itprosecurity/threads
I hope this helps.
-
I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do
Please send your reply to my email id, or post it here...Hello
Vista is not designed to be installed like this.
But others led to ways to do so.
This may interest you on this subject:
"How to create a USB of Vista Installation key '
http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html
Google will help you in this matter.
See you soon.
-
Portege R100 - how to create a bootable SD card?
Hello
I'm trying to update my BIOS of v1.40 to v1.60. I don't have an external floppy drive, or a CD-Rom. I downloaded both versions of the bios upgrade. The version of windows does not install, coming up with an error of not being able to run in V86 mode.
I read in some places to a SD card bootable using the Boot SD and a 2,88 MB image. Where can I find this picture? And how to add the update to the BIOS for it? Or what is the problem with the BIOS update, I downloaded?
Thanks in advance for any help you may be able to give me.Post edited by: Bertee
Hello
You can create a bootable SD card using the SD start utility which is preinstalled on some Toshiba units. But as far as I know with this card, you can start only to the DOS mode and there is no image on the SD card! Moreover, I don t think you can upgrade the BIOS with an SD card. To update the BIOS, you need a compatible floppy drive.
What are supported readers for this device:
http://support.toshiba-tro.de/KB0/TSB5100S70004R01.htmYou will find a description how to update the BIOS:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000000b07Good bye
-
How to create a repair disk in Windows XP
Hello
How to create a Windows XP REPAIR disc?
I have Windows XP version 5.1, Build 2600.
Thank you very much
Michael
What do you think needs repair?
You were not able to find something suitable in the tutorials section?
You can make a CD of XP bootable following Recovery Console:
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that may have come to a store to purchase the system.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
-
How to create DVDs of backup for windows 8.1
Hi I have windows 8 on my laptop that has been upgraded to windows 8.1, later. Now, I want to prepare the backup my windows bootable dvd, so please tell me how to proceed?
-
How to create a recovery media in Windows 8?
You can become the owner of a new HP laptop, but unsure of how to create the recovery media so that it can be restored if this scenario arise.
This video explains the process of creating the recovery media in Windows 8 on HP systems.
I hope this information is useful for some.
-
How to create a bootable recovery discs recovery partition?
OK, I found a few old recovery disc for Windows Vista professional for Compaq 6720 s.
Now I have 2 questions:(1) how to create these recovery discs recovery partition?(2) my version of the partition is Vista. I've updated to Windows 7. How do the Vista recovery partition 7?Thanks for your help and your time! I appreciate it...Any recovery partition is created by the PC manufacturer and nothing to do with MS
No win version, upgrade or install clean, has already created a recovery partition
-
How to create the recovery disk in Windows 8
Original title: HELP! I need to know how
I recently got a laptop HP 2000 for Christmas. She has windows 8, which I'm not too used to it. And I can't understand how or where to go to create a recovery disc for it before you put anything else on my new computer laptop. How can I do this? Any help would be appreciated.
Hello
Recovery of the system and the disk recovery options
http://Windows.Microsoft.com/en-us/Windows-8/system-recovery-diskCreate a recovery USB disk
http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-driveHow to create a system image to refresh your PC in Windows 8
http://support.Microsoft.com/kb/2748351Some manufacturers have integrated recovery methods to verify with the help of HP, their online
documentation and ask questions in the forums about known problems.HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=========================
While on the screen type start - Help
Or Win Key Q plus Apps search - help
Or charms - Search - Apps - Help Menu
After that the foregoing-> on left click-> Help and Support.
==================================
Solution Windows 8 - left Center - learn more
http://support.Microsoft.com/GP/Windows-8Meet Windows - a good start
http://Windows.Microsoft.com/en-us/Windows-8/meetGet to know Windows
http://Windows.Microsoft.com/en-AU/Windows-8/basics#1TC=T1How-to: get acquainted with Windows
http://Windows.Microsoft.com/en-AU/Windows/how-to#2TC=Windows8Contact: call, tap and beyond
http://Windows.Microsoft.com/en-AU/Windows-8/touch-swipe-tap-beyondIs a free and convenient application available on the Store - Top Free
"Windows 8 Cheat Keys.
http://apps.Microsoft.com/Windows/en-us/app/Windows-8-cheat-keys/24f62990-98c7-4c26-95cb-cb09267680e8==================================
There is no start or the Windows 8 Start Menu button.
Where is the start menu?
http://Windows.Microsoft.com/en-us/Windows-8/where-is-start-menuCustomize the splash screen
http://Windows.Microsoft.com/en-us/Windows-8/start-screen#1TC=T1Windows 8 is not available classic appearance.
3 third party programs can help:
StarDock - Debut8 - costs 4.99 $US
http://www.stardock.com/products/Start8/Free
Classic interface
http://www.classicshell.NET/Pokki
https://www.pokki.com/Windows-8-Start-menuI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Satellite L300D-13s - how to create a Bootable USB Flash for Vista Recovery drive?
Hello
Has anyone ever created a Bootable USB Flash of their Vista HARD disk recovery drive? If Yes can you help me create mine? I know that you can do for the new OS and that Toshiba provides a tool for this.
Thank you
Something like this is not possible. I have older machine tool and I can confirm that recovery USB media cannot be created DVD only.
-
How to create a shortcut icons in windows XP Home Edition of 2002 for starting the comp.
I'm just learning how to move things on this computer. I am looking for step by step instructions how to create a shortcut icons posted on my desktopp for fast entry to various installed programs and the desired Web sites. Can you help / teach me how to - thanks.
If you have a program in the start menu. All programs, (some other places as well), just: right-click | Send to | Desktop (create shortcut).
For a Web site, save in my favorites first. Then, just left-click on it and drag it to the desktop or the taskbar.
Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
I can't find how to create groups of contacts in Windows Mail in Vista-
I created two group contacts in windows Mail in Vista, but now I can't find an option to do it again anywhere...?
Missing the option New Contact Group on the Windows Contacts toolbar?
Missing the Windows Contacts toolbar buttons
http://www.vista4beginners.com/missing-buttons-from-Windows-contacts-toolbarVista - "New Contact" and "Contact Group on new" button missing
http://www.Vistax64.com/tutorials/186477-new-contact-new-contact-group-button-missing.htmlBruce Hagen ~ MS - MVP [Mail]
-
How to create a shortcut for the Windows on the desktop community?
Original title: widdget windows community?
can I get a widget for the windows community? I don't know if widdget is the word just sorry, I'd like something for my office (sort of click and go) kind of thing.
Hello
Thanks for posting your query in Microsoft Community.
According to the description, it seems that you want to create a shortcut to the Windows community on the desktop. Correct me if I misunderstood the question.
(1) what do you mean by Windows community? Microsoft Community are you referring?
If so, I suggest you follow the steps to create a shortcut to the site and check out:
(a) open the Web sites.
(b) copy the link, right-click on the desktop and select new , and then click shortcut.
(c) Paste the link in the shortened window then click Next and type a name for the shortcut.
(d) click Finish.
I hope this helps. Try the above steps and get back to us for further assistance if you have questions about the Windows operating system. We will be happy to help you.
Maybe you are looking for
-
Satellite Pro A200 - is possible that I can reinstall Vista?
Hello I bought an A200 a couple of years pre-installed with Vista Home Premium. Recently, I caught a virus and had to re - install windows I've tried in vain the recovery disc I made of the Toshiba Recovery program. After several attempts I decided t
-
Supporting files outside of the .exe file
I have a labview executable that uses resources. Currently I use resources by giving the path to the file. This becomes a problem when downloaded files executable support on the Internet and accessible from there. It loads only the exe and the misses
-
HP deskjet color cartridge is full but printer says its empty
printer works very well with the black cart. Add color basket only. (which has ink) AND IT DISPLAYS ERROR COLOR IS VACUUM... trouble shoot said nothing wrong a cartridge to office max for him have checked a lot of ink
-
DVD / CD-Rom drive will not read disks.
I don't know if it's a hardware problem or a software problem. When I put a disc in, it runs for 1-2 seconds, stops, turns for 1-2 seconds, stops, turns for like 1-2 seconds, stops (model repeats 3 times at once) and then silence. After trying severa
-
Error code RunDLL on computer starts.
I have problems trying to figure out a code of RunDLL error (C:\User\A***\AppData\Local\eyowuroviqohuwy.dll) I get when I start my computer. I ran my Microsoft Security essential program and yet it continues to rise. I would really like to know what