Supporting files outside of the .exe file

Similar Questions

• Impossible to download whatever it is, said "windows could not open the exe file.

  Once I had deleted all my music in win.med.player. sence then I can't download/open/save everything that is associated with one, "-.» File "EXE" or binary.? " Help, please.

  Hello

  1. what operating system do you use?

  2. it happens with all the exe files?

  3. What are the files he did remove WMP?

  I suggest you try the methods mentioned below and check if it helps:

  Method 1:

  You are unable to start a program with an .exe File Extension (applies to Windows XP)

  http://support.Microsoft.com/kb/310585

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• error message when removing a program "an installation support file could not be installed, the system cannot find the file specified" _

  Try to delete a file from the Program Neighborhood Agent, so I can load a different version.  When I try to remove the program through the Control Panel, it says "an installation support file could not be installed, the system cannot find the file specified."

  Hello rarif, welcome.

  I recommend that you try and that you use the Windows Installer Cleanup Utility (WICU).

  1. go in:
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  2. download the utility and install it
  3 run the utility from START > all programs > Windows Installer Cleanup...

  4. find the program you want to uninstall, then remove the
  5. next, restart your computer

  Let us know if this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lost on the *.exe files file associations

  I am running Windows Vista Ultimate 32 bit. After trying to install a new program MYOB, all *.exe files were replaced by 'Open with Myob', I manually edited a large number of changed properties, but most often when I try to run a file, it asks what program you want to open the *.exe file relevant, I don't know how to find what program he claims.

  I tried to do a system restore without a bit of luck because when I try to launch it by opening the file rstrui.exe but it asks which program I want to open it, so I'm back to square 1. I'd appreciate any help I tried to solve this problem for four solid days.

  Give a this tutorial from Microsoft Support. It consists of a "fix it for me" application and a "I'll fix it myself" instructions.
  http://support.Microsoft.com/kb/950505

  If the failure of the above, take a look at the response given by Zack, moderator, in one of the previous discussions, as well as fold them another who had a solution that was declared a response by a poster. Just read this:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/16be61fe-76ef-4b91-9F60-3338cbcefb97

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Can not run the .exe (not all exe) file

  Hello

  Have a problem when running the .exe file in windows 7.

  When I tried to open a 32-bit in my 64 bit OS setup.exe file, nothing happens at all. But when I tried the first time, a pop-up message displays this "want to re install using recommended settings. But after that, nothing happens. (the problem with only this file). But it works well in the other 32-bit OS. What should I do?

  Hello

  You can check this link troubleshooting steps:

  https://support.Microsoft.com/kb/2688326?WA=wsignin1.0

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps.

• Is that we can run all the EXE files in silent mode?

  If yes how we specify the configuration (our entries in a normal graphical installation).

  My need is that I have the exe file I want to run through cmd script or batch.

  now how can I specify the entries in command line or a batch script

  or do Fund of any separate file to store these values

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Try to reinstall Adobe Photoshop Extended CS5 Win - have downloaded the file, but when I double click on the .exe to install file, I get and which words "Installer could not initialize - file not found" error message can someone help me?

  Try to reinstall Adobe Photoshop Extended CS5 Win - have downloaded the file, but when I double click on the .exe to install file, I get and which words "Installer could not initialize - file not found" error message can someone help me?

  Hi Rose

  Refer to the troubleshooting error messages | CS5, CS5.5 bootstrapper

  Installer [CS5.5] initialization failed. Please download Adobe Support Advisor to detect the problem.

  I hope this helps.

  Thank you

  Varun

• When I run the exe file, it should load the niscope_32.dll why?

  Hello:

  I used scope in my program functions,

  and then I did it in the exe file and the installation file,

  but when I make them to another computer,

  To load the niscope_32.dll, what should I do?

  Hi ylongwu,

  You will need to install the driver OR-Scope on the deployment computer so that the code you can call the driver. You can download the driver from our Web site at drivers and updates the link below by searching our driver OR-Scope and choosing the appropriate version. I also recommend that you include the NOR-Scope driver as an extra Installer for your executable. In the setup of window construction there is a category called additional installers where you can choose the drivers and execution engines to install with your executable file. I've included a screenshot to show what it will look like for LabVIEW 8.x.

  Drivers and updates
  http://Joule.NI.com/nidu/CDs/fn/p/lang/en

  

• Programmatically move EXE file to RT-target and change the INI to start the EXE when restarting. Then the target restart RT.

  I'm trying to:

  1. download the rtexe on the target in real time
  2. download the file or - rt.ini of the RT target on the local disk
  3. change the RTApp.StartupApplication path to POINT to newly downloaded rtexe
  4. download the ini file edited to target RT
  5 reset
  6. the new rtexe should start to run

  When manually deploy the application of RT through the Project Explorer and manually restart the target RT works very well.

  However if I follow the steps above using the attached VI, to restart it does not start the EXE and loses the connection with the RT.

  When I try to reconnect, he said:

  "Errors were detected in the log of the target when connecting to the target:

  LabVIEW: (Hex 0x63B) target the RT has not enough memory to load the startup application. »

  Now why is there enough memory when the EXE is deployed through the Project Explorer, but not enough when the EXE file is moved manually?

  If there is an easier process or to achieve this goal, please suggest.

  Thank you

  Problem solved.  Problem was never in the INI file.

  Apparently using FTP "FTP Store Multiple.vi" used to move the file EXE to the rt to intimidate target must change the file somehow. Instead I just use the FTP "Put several files.vi" and everything works fine.

• Drag and drop files to the icon of the EXE

  I was wondering if there is a way for the user to drag and drop files on the .exe icon and it would launch the program to do something with these files automatically?

  For example: Some PDF convertor programs allow you to drag and drop documents, images, etc. directly on your desktop PDF Converter icon and it will automatically convert to PDF format, without the user even having to open the program.

  This same kind of functionality is possible with a file EXE of Labview?

  If you look at the Arguments of the command line of the Application class property, the first element must match the name of the EXE, the following elements will be the path or paths that were dropped on the icon of the EXE.

• How to run and pass parameters to the exe file in the txt file.

  Hello

  I am facing problem with passing parameters in the .exe file, which is run by labview.firstly that I have script .txt with the settings that I have to go to the .exe file. This .exe file is also a software, and this script is written for her. And now I have to create program in labview which should satisfy the following points.

  1. I have to use a button named "Run script". If I pressed the button, it should open the browser where I can choose the script .txt file.

  2 .exe application is expected open(Path already chossen).

  3. After passing the .exe application settings should be closed.

  4 and labview should now update its parameter

  I just open using Exce.vi .exe file, but I didn't get any idea to do more than this.can someone please help me?

  Thanks norbert. CAN I love it? What should I change now? VI attached below...

• Add the .exe file in labview 8.6 Installer

  Hi all

  I need to create an installation package for an application LV8.6.

  The problem is that the application needs a file external .exe. How can I add it to the installer?

  I put it in the same directory of the dll, but in specifications of generation /view/source files/project only DLLs are correctly displayed.

  Can I put the .exe manually in the package?

  Thank you

  You must add the file to the project. Did you do that?

• An installation support file could not be installed. The system cannot find the specified file

  I'm trying to get rid of some programs on my Windows xp, but the following alert continue to flock to the top: an installation support file could not be installed. The system cannot find the specified file

  Hello

  • What programs you try to uninstall?

  You can check this link:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• When I go to my computer, then program files it will not show me the exe files

  When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?

  Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.

  close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.

  files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "

  files/folders", nearby... This you gives access, however, once youre thru with youre editing

  or see the files/folders, you must restore default in 'Folder Options '...

• I can't run the exe to my computer files.

  I can't run the exe to my computer files. The exe extension does not appear in the options of folder of my c: drive so I tried to add, but it will not save I tried to do a system restore, and even that won't work. I think it's a virus, but I can't seem to run to anthing that might help to get rid of it. Very frustrating... Help!

  I am running Windows XP with service pack 2 on a Dell computer

  Have you tried restoring system from a command prompt?

  Otherwise, restart the computer and start typing the key F8, select Safe mode with command option. If you are prompted to select an operating system, use the arrow keys to select the right pair and press ENTER. Log in as administrator or with an account that has administrator credentials.

  At the command prompt, type % systemroot%\system32\restore\rstrui.exe, and then press ENTER. Follow the prompts to restore your computer to an earlier date.