How to create a controller 73xx simulated in MAX

Similar Questions

• How to create a controller for the window "Configuration of spectral measures.

  Hi all

  Problem: We know that to change the 'window' for spectral measurements. There need to double-click it, the spectral measurement set-up window pop up and select regardless of the window (for example, no, Hanning, Hamming, Blackman Harris etc.) we like to not view. Instead of double click in the diagram, I would like to provide users a controller of the window in front panel as a list, so that they can select the type of window appropriate according to the needs.

  I find how to solve it. Can someone share their knowledge have her number?

  Right-click on spectral measures and "convert to Subvi.  Right click on yellow VI that appears and click Open the front panel.  Replace the constant 'Spectrum Window' with a control of enum (0 = None, 1 = Hanning, 2 = Hamming, etc.).

• How to create a service of simulation of WSDL by Developer J

  Hi all
  
  I want to create a simulation of WSDL service available through developer of J. The thing is, the WSDL file does not end points associated with it. But, I have a requirement where I need to create a fake service from the WSDL and it must be deployed on the local server to test the object. What is the procedure for creating false service? The WSDL has two operations of application and response, whenever the bpel sends comments to her, the WSDL should return a response.
  
  Thank you

  Hello

  Create a web project, and then create a new ' Java web service from WSDL... This will generate the service for you in java... Change the code to insert the data from simulation to return... Deploy the web project and should be all that you need...

  See you soon,.
  Vlad

• How to create a channel for a PXI-6509

  I'm working on a program to fight the PXI-6509. The only area that I have problems with creates the string by calling the function DAQmxCreateDOChan. I get no errors during the first DAQmxCreateTask, but get an error when you try to create the channel. Exactly how to create the channel name? In MAX, I have named the "DIO" device, do not know if it matters. Any help would be greatly appreciated.

  Hi schelgr,

  Have you had a glance examples DAQmx in finder example found in help > find examples.  In input and output equipment > DAQmx there is a lot of examples that should be able to help with this query.

  Concerning

• How to create a simulator of hall sensor using NI USB-6221

  Hello.

  I am creating a hall sensor Simulator using the NI USB-6221 case.

  The idea is to have three digital outputs that generates output a digital pulse according to six different stages train.

  See the table below.

  

  And it's interesting to have this work in for example 5000 RPM (meaning 2 milliseconds between each stage).

  My question is, is it still possible with the NI USB-6221 housing?

  I tried to create a simple state machine, leading the outputs according to a predefined table.  But it became clear that it is far too slow.  The NI USB-6221 uses 10 to 15 ms to generate a numerical value of LabVIEW.

  Thanks for any ideas on how to do it.

  Looking at the datasheet.

  http://sine.NI.com/DS/app/doc/p/ID/DS-10/lang/en

  Under the digital I/o, you can see that the digital lines on Port 0 maximum clock frequency is 1 MHz.  This means that you can go from a Summit to a minimum once all the 1 micro second.  Your hardware is capable.

  The software side of things you should realize that to change the digital line from a high to a low that fast, you need to use certain types of calendar that does not have Windows.  Windows (and other operating systems) are not deterministic.  So instead of being in a loop from one State to the other, put in the buffer of the DAQ one card series of digital States and then specify the DAQ hardware to read at a given speed.  Then your synchronization is performed by the hardware, not by your software.

  Search for finder example for Digital - output continuous for an example on how to do this.

• How to create the .cod file to run on the Simulator BB9900

  Hi, I already from the zip package in order to use the bbwp command to create the .cod file and be able to run on the simulator of BB9900, but when I run this command as described in: https://developer.blackberry.com/html5/documentation/compile_ww_app_for_smartphones_1873321_11.html

  It creates two files, each with a .bar file, this type of file, I can't run it on the 9900 Simulator but a .cod file is required to run applications on the sim card.

  I don't know how to create the .cod file.

  Thank you

  Have you used Blackberry Webworks SDK for smartphone or Tablet SDK? The .cod files should be located in the subfolder OTAInstall of your output folder if you are using the Webworks SDK for Smartphone

• How many SSIDS can be create a controller 4404 so autonomous AP 1250?

  How many SSIDS can be create a controller 4404 so autonomous AP 1250? How a VLAN can be created in EAC one?

  Thank you...

  Hello

  The WLC, you can configure up to 512 wireless LANs and both maximum access point 16 wireless LANs can be released or can be used...

  Local networks virtual are dynamic interfaces and we can configure dynamic interfaces 512 max on the WLC...

  Let me know if this naswered your question and please remember to note the useful messages!

  Concerning

  Surendra

• How to create an app with space name?

  Hi all

  How to create an application with the space, for example "Hello Word" name When I run my Simulator, I got ' Hello$ 20World "instead. I use the plugin for eclipse for development. I can see the Application descriptor for my application, and it shows the thin space. I tried to change the Blackberry project properties tab generate file output name, but it doesn't help in any way. Please advise...

  Goto Blackberry project properties

  Click the general tab

  Write in title = "Hello World".

  and you can see your title of the modified project

  I hope that you ask for it only!

• How to create a new BB - 10 App?

  Hello..

  PLEs help me...

  How to create the 10 new web app bb base?

  Well this documentation will help you get started:

  https://developer.BlackBerry.com/HTML5/documentation/creating_hello_world.html#lzi1359756502119

  Basically, you need to have the .html file and the config.xml file.

  The Ripple emulator will help you test this chrome, but you must get the SDK to build your application, test it on a simulator & publish later.

• How to create a button icon / browse files

  Hi all, I have 2 questions I want to ask you:

  1. how to create a button icon using action script?

  I add this part of the code at the top of my file .as just below the keyword package:

  [Bindable]
  [Embed(source="/images/pause.png")]
  private var pauseIcon: Class;

  I then added, in the main function, copy the following code:
  var pauseButton:Button = new Button();
  pauseButton.setStyle ("icon", pauseIcon);

  The compiler problem with the "private var pauseIcon: Class; ' line and the new line of declaration of button.  I declare the type of button?

  2. how to browse files in the Simulator? I try to use browseForOpen, but it does not work.  It shows a blank dialog box saying no file meets my criteria.

  My code for browsing the files:

  var docFilter:FileFilter = new FileFilter ("Files", "*.") *") ;

  var myFile = File.applicationStorageDirectory;

  myFile.browseForOpen ("Open", [docFilter]);

  Thank you

  The embedded definition must be within the class as a normal attribute / member of this class.  You have outside the classroom.

  [SWF...

  SerializableAttribute public class Main extends Sprite

  {

  [Embed(source="/image/player_pause.png")] private var pauseIcon: Class;

  public void Main()

  {

  var btn: IconButton = new IconButton();

  btn.setIcon (new pauseIcon());

  this.addChild (btn);

  }

  }

• How Flash perc 6i controller integrated in dellR710?

  Hi all

  I'm wrong, net flashed on board controller perc 6i server Dell R710.

  I want to Flash the firmware on it again. I checked the dell website, but there is only the procedure on "how to upgrade". I totally want to flash back, the 4 MB file on the map, where I can get it?

  Hi Renon,

  According to what is the current state, here are the links to the FW updates. If the FW is completely annihilated, and the map is no longer functional, there is a good chance that you can not solve this problem.

  (1) you can try flashing the FW within your operating system by running the file update directly

  Integrated firmware PERC6I 6.3.3 - 0002, A00, published on 17/05/2013, recommended, Urgent if yours is less 6.1.1
  Windows: http://downloads.dell.com/FOLDER01002138M/1/SAS-RAID_Firmware_F96NR_WN32_6.3.3-0002_X00.EXE

  Red Hat: http://downloads.dell.com/FOLDER01002136M/1/SAS-RAID_Firmware_F96NR_LN_6.3.3-0002_X00.BIN

  GnuPG: http://downloads.dell.com/FOLDER01002137M/1/SAS-RAID_Firmware_F96NR_LN_6.3.3-0002_X00.BIN.sign

  (2) use the idrac web interface and run remote file update (version .exe for windows) from the update tab.

  (3) use any bootable media to start the command prompt and run the version that is not packaged.

  Non-packaged/Hard Drive: http://downloads.dell.com/FOLDER01000364M/8/SAS_RAID_PERC6i-int_6.3.3-0002_A00_ZPE.exeextract the non-package files out and run update.bat using provided from the following bootable media.

  A common way to do this is to use the following tool to create a USB Bootable flash to in order to get the command prompt.

  See > how to create a Bootable USB Flash using Dell Diagnostics Deployment Package (DDDP) drive
  http://www.Dell.com/support/article/us/en/19/SLN143196/en

  Use the switch 'forcetype' with the update command.
  Ex: update.bat - forcetype

  Please let us know if this helps

• How to create and animate a viscous black oil?

  Hello!

  
  Can I ask you a question?

  I want to create a viscous, oily liquid and that animate it so it "wobbles".

  But I don't even have an idea how to create the chart.

  I have attached a picture. Here you can see how the liquid should look like.

  (In the background. Red dots and other stuff important deosn)

  It would be so great and very useful if someone have an idea and would share.

  Thank you for the advice,

  best,

  Peter

  

  If you talk about the background, I would like to start by creating a shape with two fillings layer degraded at right angles to each other. The upper gradient would be defined to multiply if you end up with something like this:

  

  Then I would start to play with things like Action Ball CC or Mr Mercury to get something like that which moves slowly:

  

  You could then compose before as a layer and add something like CC glass to end up with something like this:

  

  Then you try just to get the look you want. Given enough time you could replicate the appearance of the background very closely. There are a lot of simulation and distortion effects to play with. The trick is to start with something that will give you different colors. Creating a rectangle with a gradient and then duplicate the gradient and play with angles and blending modes can give you a good place to start.

• How to create RAID 5 with 6 disks?

  I'm new to vmware. My machine is currently running ESXi 4.1 but the RAID set up gives me no more disk space I was advice to remake the structure of the disc physically to have all 6 disks in RAID 5 and then reinstall ESXi. I'm doing, but I need a direction how to create RAID 5 with 6 disks. Can someone please help with this?

  Thank you

  SD

  Assuming you are using the integrated Smart Array 6i controller it should without a problem. If you can get into the BIOS of conreollers, you can also boot from Smartstart CD and use the ACU (Array Configuration Utility). The ACU has the advantage that you can split the RAID in several logical drives. I usually create a small logical volume (~ 10GB) for the installation of the hypervisor (ESXi) and another large logical volume to the VMFS data store.

  André

  PS: When you respond by e-mail, please do not understand the original message.

• How to create several data on local storage scsi stores

  Hi all

  If you have a host ESX 3.5 local scsi storage with how you create multiple data warehouses. I would like to create 2 data warehouses. One for my virtual machine and one for my ISO. I tried 2 partitions VMFS3 partitioning at the time of the creation of ESX but when I remove the storage to rename it it only allow me to create 1 data store? Is this possible?

  Is there a downside to simply create a folder in 1 ISO called data store and empty my iso files it?

  I would also like to point out that I have only 1 raid controller

  you will need to manually partition the free space of the Service Console using fdisk.

  If its only for a store, I wouldn't bother.

  Just create a folder like you said yourself, without inconveniences, except that you have to watch out you don't fill your data with the ISOs and other stuff store.

• Creating own controller

  There are parts of my movie where I want the user to have full control. So I created a controller with reverse, pause, forward, play.

  Script help would be appreciated. I tried go to the stop section - and even put it in a loop - but it does not stop

  I tried frame + 1 for step without no lock.

  How can I control image movement.

  I prefer not to use markers - because the count would be in the thousands.

  Thank you

  This approach is to put all the logic to control the position of the timeline in a parent script and then use a global exitFrame handler inside a movie script to route the call to an instance of the parent script.

  It is simpler than it seems.

  Here is the script of the film:

  global gControler

  on prepareMovie

  gControler = script ("Timeline control") .new (#play) - #play, #pause, #reverse. speed [speed] option value

  end

  on exitFrame

  gControler.updateFrame)

  end

  --------------------------------------------------------

  Now you can control the flow of the timeline through the global "gControler" object that I provided below.

  The interface is:

  gControler.play (), gControler.play (3), etc.

  gControler.reverse (), gControler.reverse (2), etc.

  gControler.pause)

  gControler.jump (1), gControler.jump (10), etc.

  gControler.seek (10), gControler.seek (1000), etc.

  All managers in interpolations exitFrame replaces movieScript exitframe Manager. You can or can't do.

  Paste the following in a script named parent: "timeline control.

  -Parent Timeline control Script

  property pState - #play, #pause, #reverse

  property pSpeed - images by exitFrame. Normal playback rate is 1.

  the new me, astatine, speed

  If aState.SymbolP then

  pState = astatine

  on the other

  pState = #play

  end if

  If it is [#play, #pause, #reverse] .getPos (pState) then pState = #play

  If speed. Then IntegerP

  pSpeed = speed

  on the other

  pSpeed = 1

  end if

  return to me

  new end

  -change current image based on the state variable pState

  on updateFrame me

  pState cases of

  #play: go (min (_movie.frame + pSpeed, _movie.lastframe))

  #reverse: GB (max (1, _movie.frame - pSpeed))

  #pause: go (_movie.frame)

  cases of termination

  end updateFrame

  -go forward

  on play me, speed

  If speed. Then IntegerP

  pSpeed = speed

  on the other

  pSpeed = 1

  end if

  pState = #play

  axial play

  -go back

  on reverse, speed

  If speed. Then IntegerP

  pSpeed = speed

  on the other

  pSpeed = 1

  end if

  pState = #reverse

  other side of the end

  -loop on a framework

  on a break me

  pState = #pause

  end break

  -move the number of "pos" of images from the current position. Can be positive or negative

  on jump me, pos

  If pos. Then IntegerP

  GB (max (1 min (_movie.frame + pos, _movie.lastframe)))

  end if

  jump to end

  -go to an absolute position on the timeline

  then look for me, pos

  If pos. Then IntegerP

  GB (max (1 min (pos, _movie.lastframe)))

  end if

  end seek