Creating own controller

Similar Questions

• How many SSIDS can be create a controller 4404 so autonomous AP 1250?

  How many SSIDS can be create a controller 4404 so autonomous AP 1250? How a VLAN can be created in EAC one?

  Thank you...

  Hello

  The WLC, you can configure up to 512 wireless LANs and both maximum access point 16 wireless LANs can be released or can be used...

  Local networks virtual are dynamic interfaces and we can configure dynamic interfaces 512 max on the WLC...

  Let me know if this naswered your question and please remember to note the useful messages!

  Concerning

  Surendra

• Satellite Pro A300-28V - cannot create own recovery disks

  Have a portable Satellite Pro A300-28V with Vista Business 32. After a HARD disk recovery partition recovery, I decided to use the PC function full system backup to make a picture for later retrieval with all my current settings. Too inconvenient for factory reset default (Thunderbird 3.0 Mail, Open Office and some other small applications already running no problem for years on another computer in the office).

  The system needs 5 to 9 DVD and he wrote the first DVD. Takes about 30 minutes. Then, during the audit of this disc, it crashes. Audit bar stops at about 30% complete.
  Anyone with this experience? No, the company "Complete PC Image" works well on an OEM of Vista installation?
  Or maybe it's the DVD player in need of an update? I do not use a 3rd party burning software.

  / Sweden

  Hello

  What program you use to create your own recovery discs? For example, I mean Acronis, Norton Ghost, etc..

  In your case I would try with another program like Nero or CD Burner XP burning.
  In addition, you can try to remove upper and lower filters in the Windows registry, maybe that will work.

  Finally, and especially on the Toshiba site, you can check if there is an update to the firmware of your CD/DVD drive.

• How to create a controller 73xx simulated in MAX

  Greetings everyone, as the title suggests, I read on the manuals that I could work motion of LabView without actual hardware functions, if I created a virtual device. However, he just said that I should consult the instructions in using the Query Wizard to install a controller movement NOR virtual 73xx, but I have no idea what they mean by that, and google search proved futile.

  The controller in the site is a PXI-7350 but virtually any 73xx would do, as I'm just trying to familiarize themselves with the features now, I just want to know how to put in place. Thanks in advance.

  In MAX right-click devices and Interfaces, some movement OR virtual devices, press next and select a template.

  Ben64

• How to create a controller for the window "Configuration of spectral measures.

  Hi all

  Problem: We know that to change the 'window' for spectral measurements. There need to double-click it, the spectral measurement set-up window pop up and select regardless of the window (for example, no, Hanning, Hamming, Blackman Harris etc.) we like to not view. Instead of double click in the diagram, I would like to provide users a controller of the window in front panel as a list, so that they can select the type of window appropriate according to the needs.

  I find how to solve it. Can someone share their knowledge have her number?

  Right-click on spectral measures and "convert to Subvi.  Right click on yellow VI that appears and click Open the front panel.  Replace the constant 'Spectrum Window' with a control of enum (0 = None, 1 = Hanning, 2 = Hamming, etc.).

• How to create own IDE for LABVIEW (such as vision builder)

  Hi all

  My pretty funny question, I know that.

  I like to create Labview Application IDE like Vision Builder.

  How to do this?

  As far as I know that Vision Builder is developed with LabVIEW, the source code of course is not public... But why do you want to create a new IDE for LabVIEW? LabVIEW is an IDE, no?

  I think also Vision Builder uses a lot of scripts and sub-panels, I can't help you much more than that.

  For us - outside NI - script cannot be used in an EXE file, they reserve that for their applications not it will be a difficult task.

• TextFlow and controller being created too early?

  I drove my work with the TextFlow into a component of the canvas, he is in a SWC and successfully is part of the application, so that it has been designed. No problems. Okay, now time to re - use my work in another app that could benefit from a rich text item. At through the usual movements and got all my UI for my component rendered except the TextFlow text!
  
  Then I discovered, that's when I resized the browser window that my hosting Flex application, the waterfall resize event got the TextFlow to finish rendering, scroll bars had poorly paid, and he was ready to accept entries with the blinking cursor.
  
  Here is a dump of some tracing statements that I have in my code, I'm working on the order in which events are pass and when the text stream gets adequate measures:
  
  Composer-> resize-> TextFlow New Dimensions-> w: 0 h: 0
  Composer-> Display Controller-> TextFlow Dimensions creation-> w: 754 H: 0
  Composer-> created
  MessageEditorBase-> created
  MessageEditorBase-> event-> resize
  MessageEditorBase-> event-> display
  Composer-> resize-> TextFlow New Dimensions-> w: 754 H: 0
  MessageEditorBase-> event-> resize
  Composer-> resize-> TextFlow New Dimensions-> w: 1328 h: 274
  MessageEditorBase-> event-> resize
  Composer-> resize-> TextFlow New Dimensions-> w: 1328 H: 275
  MessageEditorBase-> event-> resize
  Composer-> resize-> TextFlow New Dimensions-> w: 1329 h: 276
  MessageEditorBase-> event-> resize
  Composer-> resize-> TextFlow New Dimensions-> w: 1334 H: 277
  MessageEditorBase-> event-> resize
  Composer-> resize-> TextFlow New Dimensions-> w: 1350 h: 279
  
  "MessageEditorBase" is a canvas (used as a tab) that is displayed to the user. In this painting there has many components, including the 'composer' who is actually a toolbar of the elegant buttons and format works, and then a blank canvas that holds a UIComponent and becomes the DisplayObjectController. Works fine in my other app, code is near line for line with examples of Adobe.
  
  Notice how he starts 0,0; and then gets a measure of the width of 754; Finally when I the user resize the application complete the rest of the appropriate dimensions do get calculated.
  
  I don't think it's a problem of TextFlow, but I can't say that I understand the hierarchy made enough Flex have implemented a TextFlow and its controller in the right way with this app.
  
  Any thoughts? If you would like more information, just ask and I will try to explain as best as possible.
  
  

  It turns out that with a lot of statements of fiddling and trace, I found a way to initialize the DisplayObjectController with valid pixel values. In your examples of TLF, the developers always created a controller display object using the specific dimensions, such as 250 x 250. But I need my text component to be created dynamically depending on the size of the screen of the user. This was not correctly after I upgraded to build TLF 370, although he is not even a problem TLF.

  I have taken the steps of the parent Canvas. For some strange reason, in the world of measurement of Flex components, the child canvas further down into the application, I added the sprite was not get metered. When I switched the controller values width and height of this child, so they were 0.

  I hope that makes sense, but anyway, problem fixed.

  Edit:

  Here is an example of my code by using a custom controller that had the overloaded event keyDown:

  theController = new ComposerDisplayController (uiFlowComponent, uiTextArea.width, uiTextArea.height, this);

  I spent the values I would expect UI to measure rather than provide me explicit pixel values. I had a problem when the user interface gave me zero.

• How to reorganize the field that was dynamically created by the controller

  Hello
  
  We have created a field (of 'Style' = > 'MessageChoice') in the page using the declaratively controller and also where we dynamically attach a View object to the field based on certain conditions.
  
  The hard part, that we are facing here is that we couldn't a replenishment of the field through customization because the field is created via controller because we don't see not any which column.
  
  Can someone help me please how to reorganize the field by the controller or any other way to do this?
  
  
  Your suggestions are very appreciated.
  
  
  With our thanks,
  Trehout

  Depreciated, the method will not be supported or will be obsolete in the future provided.
  don't worry about the depreciation methods. His will not touch you in the near future...
  Because the whole ofa technology is amortized now... ;)

  Yes, if the item is part of a specific region use as a handle.

  Prasanna-

• Failed to create the startup database

  Hi all
  
  I have tried my due diligence research on this forum, install the documentation and the web before posting, but with no luck.
  
  I have two virtual machines with VMWare Workstation 6.5. Both servers are Windows Server 2003 Enterprise Edition 32-bit. One is a domain controller and the other is an application server. I am able to install Oracle 10 G R2 Enterprise Edition based on the application server, but when it gets to the part to create the Starter it database fails with error TNS-12154: TNS: could not resolve the connect identifier specified. All of the default options have been used during the installation.
  
  After my research, I checked tsnames.ora and sqlnet.ora files. Here is the output of the two files...
  
  tsnames.ora-
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  SQLNET.ora-
  
  
  SQLNET. AUTHENTICATION_SERVICES = (NTS)
  
  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
  
  All the troubleshooting tips that I find seem to assume that a database has already been created. How can I solve when there is still no database? In addition, it looks like the tsnames.ora and sqlnet.ora files are by default and I don't think they will have to be changed.
  
  Another recommendation was to make sure that you can test your host using the host name and the nomhote.nomdomaine. I am able to do both successfully.
  
  Any help would be greatly appreciated as I don't know what to do next. Thank you.

  user8987016 wrote:
  I installed Oracle 10 g R2 Enterprise Edition so I netca.exe and used it to configure the tsnames.ora file. I also used the net manager to configure the listener and name of network service. The part that confuses me however is that I can't even create a database initially without getting the error ORA-12154. All these requirements are before you even create a database?

  N °

  You create a database while on the computer that will host the database. You set the ORACLE_HOME advance and may disconnected the ORACLE_SID, or assign the proposed SID.

  And then you go around Networking Oracle using the ' SQLPLUS / as sysdba ", rather than"sqlplus /@db-alias AS SYSDBA", if you use ypur db - create own script.

  If you use DBCA to create the database, then you have another question. Note that the @ is the separator between the password and db-alias. If you happen to use the very secure password for SYS (on the screen of the DBCA passwords) which includes the @, DBCA will fail with a 12154 because think there a network alias and it passes the password-part Oracle Networking, which, in turn, said 'no '.

  Published by: Hans Forbrich, January 19, 2010 20:18

  An idea - if you use DBCA, try to generate the create script (an option of DBCA) but DO NOT create the database. Then after this script if it is not obvious what is the error.

• How to create a backup for Satellite L20-100?

  My Satellite L20-100 crashed & it took me 24 hours to recover (using the provided factory product recovery CD) & for reinstalling other software & updates.

  Now I'm afraid, it may crash again & I have 11 GB of software. I had a function on my Windows XP console start > programs > Accessories > system tools > create backup disk (or recovery) before it crashed, but it is no longer present.

  ANY THOUGHTS? URGENT PLEASE!

  I recommend you to use a very good third party software called NORTON GHOST. I use it for a year. You can create own recovery DVDs and use any time when there is a problem.

  I do the same thing. This created individual image is recorded on the partition d. If I want to have the new facility that I simply start GHOST and the partition c is crushed.

  If you need more info please let me know.

• How to create recovery for Satellite M70 CD

  Hello

  I recently got the Satellite M70 on of my friends.

  But he lost his recovery cd and I would like to start with a fresh install...

  How can I create a CD of recovery for this laptop?

  Thanks in advance

  Well, you have tow options.
  First of all, you can order the CD from recovery Toshiba as suggested by the above user.
  As far as I know it s not expensive.

  Second possibility might be to create your own recovery CD using a 3rd party such as Norton Ghost for example application.
  Creating own recovery CD would be possible since all Toshiba drivers and tools are published on the European driver Toshiba page.

  So it s your choice now ;)

  Good bye

• Creating indexes for the table

  can someone help me how to create indexes in the table. I m creating own table... I need to select a particular field in the table. So I need to calculate the index position. I use my code like this,

  This will returnthe number of columns in the table.

  Class array

  {

  private int Table_Index()
  {
  for (int x = 0; x)<>
  {
  table_index = x;
  }
  Return table_index;
  }

  }

  MainClass can I get this length of Index

  Table T1;

  int t1 is T1. Table_Index();

  This property returns my length (4) of table column

  Using this index (t1) I HAV to see what position I'm at table now...

  someone help me...

  You can use a listfield, he supports methods to get the selected row and its contents.

• Only 24 controller in a group of mobility?

  I want to create a controller of the anchor who has a leg dot1q in our DMZ, then do foreigners contorllers for the rest of my company that would be 34 controllers in different geographic locations.  The problem I see, is that I can only add 24 members mobility to the group in order to create the counterpart of mobility as indicated in this document.

  http://www.Cisco.com/en/us/docs/wireless/controller/4.0/Configuration/Guide/c40mobil.html

  What do people for mobility with more than 24 controllers anchors?  I use a mixture of 6.0.182.0 and 4.2.112.0

  Tim,

  Yes, you can enter only 24 static entries, so if you have any comments redundant anchors, so you will need to get two more and split up the load between a pair of anchors comments.

• R12.2.4 Look Ahead is not extended controller

  Hello Oracle OAF gurus,

  I need help on finding a work around the question of the appearance of BSE ahead don't appeal to a controller.  I have a situation where I have extended a controller for the page where I take a value in the LOV field, find the id of this value and move to the View object that manages the LOV because the query for the LOV requires specific values.  In R12.2.4 of the EBS, the early feature of the look does not call the page controller (or any controller).  Some how as if by magic, it goes directly to the View object.  This means that my request for the LOV does not work.

  I have tried to adjust the setValidateOnLovPrepare on the specific LOV, but that doesn't seem to do anything.  The controller is still not called.

  Any help in this matter would be greatly appreciated.

  Thank you

  Tim

  Hi 2598orcl,

  I want to thank you once again for all your help with this problem.  I think I found my solution, although it came not from the changes you recommended.

  I tried to create a controller for the LOV.  However, I have not been able to access the data entered by the users of sill.  At least not trying to access the data of criteria.  I think the question was to find the proper name for the field that I was looking for.  Apparently he was not one of those I had seen before, such as Nom_tiers, or Nom_tiers or even Value_3.  However, as I me do more research as to why the criteria did not work, I found where someone spoke using the initQuery (Dictionary []).  I had not seen this before.  Apparently if you override the initQuery in the view with the dictionary entry] object, you can access the data entered for the LOV with something like this:

  public void initQuery ([Dictionary] x)
  {

  If (x! = null)
  {

  for (int i = 0; i)< x.length;="">

  Dictionary z = x [I];
  String Nom_tiers = (String) z.get ("criteriaValue");

  }
  }
  }

  This may have been what you were trying to tell me, but I do not understand until I found other people example.

  Thanks again for your time, your help and your direction.

  Tim

• IntelliJ - how generate/update FXML controller

  If it is not appropriate to ask here just tell me and ignore...

  I wanted to try IntelliJ IDEA to work with JavaFX 2.2 and 8. I intend to start using FXML and SceneBuilder for my UI design in the future and I can't understand a feature located in netbeans associated FXML.

  I searched online and at the Jetbrains site and in-app help, but has not found an answer. Is it possible to create or update the controller FXML class in IntelliJ IDEA (version 12.1.4 is one I have) after you change the file FXML in SceneBuilder 1.1? I throw SceneBuilder 1.1 fine IntelliJ but after I add controls and change the action methods that they don't is reflected in the controller class in my project IDEA. I see no update or create the controller in the IDEA after changing the FXML. In Netbeans 7.4 RC1 is a "controller to" right click on the fxml files option which does what I want. Maybe I'm just blind or IDEA does not have this feature?

  Generate your controller in SceneBuilder skeletons.

  In SceneBuilder, create your FXML, then:

  View | Show the skeleton of the sample

  Press the button "copy".

  The idea:

  File | New project | JavaFX Application

  Click your src folder.

  Paste (e.g., CMD + V on Mac).

  In SceneBuilder:

  File | Save as

  Save your fxml in the same directory src as the skeleton of controller, you just pasted.

  Modify the skeleton of the controller and your main Application as needed.

  Run the program in the idea.

  If you make subsequent changes to the FXML, use mode. Watch skeleton of sample to generate the new code of the controller, then manually copy and paste into the songs you want in your controller.

  In general, I try to keep pretty skinny all custom code FXML files I write (or at least not mix custom code with the code skeleton), so that it makes it easy to just copy and paste skeletons changes in them.

  I don't like Ruby, but I like the way that JRubyFX handles FXML (it automatically generates skeletons of the FXML controller).  Unfortunately, no one has created equivalent functionality in Java.

  https://github.com/JRuby/jrubyfx/wiki/getting-started