How to create a partition on a Satellite A200 - 14 d?

Hello

I have a problem with my scores as I'd first on the laptop 2 apparent partitions on the HARD disk, labeled C:\Vista
(Vista Home Premium) and E:\Data (57GB and respective 55GO). I decided to format vista because I had some problems with the FN key. After using the product recovery CD to install fresh windows that I enjoyed, I have only one partition at a total of about 115 GB. I wanted to have at least two partitions, so I used once again the CD to reinstall windows and try to find out how I can make a partition during the installation. After I chose the language there was a window saying that I can adjust my disk space, so I did, distribution of 40 GB on the partition where windows should be installed, assuming that the rest of the HARD drive label is distributed to a second partition.

After that I reinstalled and did all the updates, I had a big surprise to see that I have 1 single partition with 39 GB. Now, I used Device Manager to see what the problem is. I went to the properties/volume of HARD drive section and clicked on fill. Here, it shows the 40 GB windows partition and unallocated space of aprox 72GO. My main problem is I have to have this space partitionated and since the recovery disk does not give me this option is there any other way vista can make a partition with the remaining space? I look forward for some advice please.

Thank you

Hello

Don t worry dude it is all right. It seems that the partition was created but not activated.
After the Windows Vista installation please go to managing disks.
You will find the first partition C and maybe a second or only one free space.

If you want you can shrink the C partition first. After this process, you can right-click on the free space and create a second partition or add free space to the second partion that is already created.

Good luck and best regards

Tags: Toshiba

Similar Questions

  • How to create a partition bootable on USB

    Can someone tell me how to create a partition on my USB key bootable?

    The Microsoft page for this was complicated and not very clear :-)

    I hope that flashing the new update of the BIOS on my USB solves the recent problems of Vista...

    Hello

    How to create a Vista Installation USB key - read the warnings
    http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

    HOWTO: Install Windows Vista from a high speed USB 2.0 Flash Drive
    http://kurtsh.spaces.live.com/blog/CNS! DA410C7F7E038D! 1665.entry

    Install Windows Vista from USB Bootable Flash drive
    http://www.techmixer.com/install-Windows-Vista-from-bootable-USB-Flash-memory-drive/

    How to create bootable USB drive to install Windows Vista?
    http://www.askvg.com/how-to-create-bootable-USB-drive-to-install-Windows-Vista/

    You can install Windows from one will also let you Flash a BIOS.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How to create a partition only for my operating system another to play with me?

    My relay problem that I had towing partition C: and D: drive, but I had to remove my D: drive because my C: drive was full, and now I want to create and partition only for my O.S. and only this, so that any other program can be installed in my D: drive.

    Someone could answer my question A.S.A.P. Please, I want to know if I can do it or not, and if I can how to do it.

    Before trying to partition, which is shown in management disks for disk 0? (the name of the partitions & sizes)

    This PC came with win7 preinstalled, and if yes do you have does the recovery discs?

    Note If you attempt to partition, without first giving that info, you can trash your system and lose everything on the disc

  • How to create a partitioned table

    Apex 4.2

    Oracle 11g

    There is a large table, which have 160000 rows, I would like to create a partitioned table to improve performance, but could not find a way to create a.

    Concerning

    Hello

    I don't see how your question relates to APEX, unless you mean how to make APEX builder object Explorer.

    Answer is simple, you can do it from the object browser.

    You should write a ddl script to create the partitioned table, and run it from sql commands.

    Kind regards

    Jari

  • How to create a Partition diagnosis HP Elite SFF-8300


    Both pis, I thought about it myself. I just installed the HP PC Hardware Diagnostics UEFI to:

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5232857&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_131595_1%257CswEnvOID%253D4054%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    The application, once expanded, creating the partition of the HP_TOOLS and installs diagnostics.

  • How to create the partition on a column in a table on a daily basis

    Hi all
    I wrote a query that does not, I have a column of varchar type, and I want to create the partition of the table on that column based daily interval. but ist is in error...

    my query is...

    create the table user_detail
    (username varchar2 (50))
    The user ID number,
    country varchar2 (25).
    accupation varchar2 (100),
    company varchar2 (100),
    joindate varchar2 (14))
    partition by range (joindate)
    INTERVAL (NUMTOYMINTERVAL (1, 'DAY'))
    (PARTITION newone VALUES LESS THAN (to_date (April 13, 19 ', 'aa-mm-dd')));


    error is:

    Error from the 1 in the command line:
    create the table user_detail
    (username varchar2 (50))
    The user ID number,
    country varchar2 (25).
    accupation varchar2 (100),
    company varchar2 (100),
    joindate varchar2 (14))
    partition by range (joindate)
    INTERVAL (NUMTOYMINTERVAL (1, 'DAY'))
    (PARTITION newone VALUES LESS THAN (to_date (April 13, 19 ', 'aa-mm-dd')))
    Error in the command line: 1 column: 0
    Error report:
    SQL error: ORA-14751: type of invalid data for the partitioning column of a partitioned table interval


    Can I create partition on the varchar data type?

    On ORA11gR1 it works:

    --virtual column
    CREATE TABLE TEST(joindate VARCHAR2(14), part_joindate AS (to_date(joindate,'dd.mm.yyyy'))) partition by range (part_joindate)
    INTERVAL(NUMTOYMINTERVAL(1, 'YEAR'))
    (PARTITION newone VALUES LESS THAN (to_date('2013-04-19', 'yyyy-mm-dd')))
    ;
    
    INSERT INTO TEST(joindate) VALUES('19.04.2013');
    SELECT * FROM TEST;
    
    DROP TABLE TEST;
    --aux column
    CREATE TABLE TEST(joindate VARCHAR2(14), part_joindate AS (to_date(joindate,'dd.mm.yyyy'))) partition by range (part_joindate)
    INTERVAL(NUMTOYMINTERVAL(1, 'YEAR'))
    (PARTITION newone VALUES LESS THAN (to_date('2013-04-19', 'yyyy-mm-dd')))
    ;
    
    INSERT INTO TEST(joindate) VALUES('19.04.2013');
    SELECT * FROM TEST;
    
    DROP TABLE TEST;
    

    Published by: spajdy on April 19, 2013 14:58

  • How to install the recovery image on Satellite A200?

    Hi all, I would like to do a restore to factory for my Satellite A200
    I checked their hard drive and confirmed that the recovery partition is still there

    When I want 0 and turn on the laptop, rather than the beep and the warning screen, need me only to windows Boot Manager page
    So I pressed F8 and choose repair computer, I read that I can also start the recovery process by choosing toshiba Recovery Wizard
    But when I press the Recovery Wizard, the cdrom eject and tells me to put in the recovery CD (which I did not)

    What bothers me is I checked the recovery partition is there but I can't find a way to start the process
    Someone knows the solution? Or there is another button to press when you start the machine?

    Thank you very much!

    In your case the drive HARD recovery isn't possible
    So in this case only the Toshiba recovery disc can bring notebook to factory condition.

    You have not created the recovery disc in the past well. Given that the recovery partitions seems to be available on the HARD disk, you can try this workaround

    http://APS2.toshiba-tro.de/KB0/HTD4103KB0000R01.htm

    It should be possible to create a USB flash memory key or a disc using image files which are available on the bootable recovery partition.

    In the worst case if this procedure is not possible, you need to install the clean Microsoft Windows operating system. Essential drivers may be downloaded from the driver page.

  • How to maximize battery life battery on Satellite A200

    Hi all!

    I just bought a laptop satellite A200. Could someone tell me how to maximize my battery life?
    I already had my first charge 2 hours after a total of battery drain, however, my battery fail to maintain another couple of hours.
    I do something basic like navigation and using the media player of saved files and I don't use my dvd readers yet and do not lend themselves its operations.
    Please advice.

    Thank you!

    Hello

    What to say dude battery working time depends on the use of the laptop and on the performance of the battery.
    I put t know what exactly the battery delivered with this laptop, but as far as I know it s a common standard battery. If you want to use the laptop much more time, I advise you to buy the stronger battery; for example, with 6000-8000mAh with Adapter Cable.

    By the way; You can configure the use of battery power in Vista power options.
    If you wish, you can create a new configuration of the plant to get the best performance from the battery.

    Check it!

  • How to install Windows XP on the Satellite A200 - 20 c

    Hello!
    I have a problem with my Satellite A200 - 20 c. I want to install Windows XP Home edition, and I can't find the drivers on the hard drive. Where can I find it? How to install Windows XP Home edition? Could someone help me?

    Hello

    I see that you didn t read some messages in the forum here. There were so many threads on your problem created and discussed. You only need to use the search function "Search Forum Boards" and type something like "A200 WinXP" or "WinXP Sata" and you'll get more then enough threads/posts where your problem was already discussed and resolved.

    Hope yoúll find what you need.

    Welcome them

  • I can create RAID 0 with the Satellite A200-23 s

    Hello!
    -----
    I have Toshiba Satellite A200-23 s.
    This laptop has two (200 GB) HARD drives.
    Can I create RAID 0 with this HARD drive?
    -----
    P.S. Sorry for my bad English

    Hello

    First you must know that the A200 doesn t series support RAID technology!
    Therefore, the RAID-0 is not possible.

    The phone supports 2 hard drives, but you cannot use RAID settings.
    The two hard drives can be used separately and independent of each other

    Best regards

  • How can I get the disks for Satellite A200-13R?

    Hello world

    I have labtop (Satellite A200-13R), it came with windows VISTA, but I didn't like it.
    I installed Windows XP SP2.
    But I've lost readers
    How can I you readers?

    Cordially and Thankx...

    I don't understand how you lost the drivers but if you want to find drivers please visit the download page for Toshiba under http://eu.computers.toshiba-europe.com > support & downloads.

  • Problem creating the disk hard recovery Satellite A200 + touch pad

    So I lent my laptop to my daughter until she could get enough to buy a PC.
    Well, I got it back that only she has installed a bunch of stuff to the point where it is blowing on vista even after than my attempts to clean I decided to start the laptop using the creation of recovery disk came with the laptop.

    But now, I used about 8 dvd discs, trying to create a good drive but I restart fr. with the disc in... nothing happens. I'm trying to spend directly in vista... and he says can not read the disc. I've recreated the disc several times and the same result and well, it was the only type of restore disc that came with the laptop]

    Also as I've gotten at the time when I use the touchpad my cursor is jumping around, is that fixable?

    Thanks in advance.

    Hello

    Sorry, but something must be wrong in your post. As far as I know Satellite A200 comes with original Toshiba Recovery DVD. You should not create anything. New laptops like A300 do NOT come with DVD recovery and each laptop user, it should only create, but not with Toshiba Disc Creator. For this Toshiba application offers another tool. The name is Toshiba Recovery Disc Creator. It is not the same tool. So you have probably original Toshiba drive.

    So if you have it please use this recovery DVD as described in this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37706

  • How to use an external monitor only - Satellite A200 - 1 m 8

    Hello

    I have Toshiba Satellite A200 - 1 m 8
    I have an external monitor connected to the laptop.

    D I would like to know if it is possible to disassemble the monitor to the laptop so that it becomes on my way so that I can easily see the external monitor.
    If so, please send me instructions on how to do it and if possible photos.

    Thank you.

    D I would like to know one thing too. Have you can be checked manuals s you have with your laptop?
    Boyfriend sorry but these issues are usually described in the manuals. Check if you can find something on FN + F5.

  • How to install the recovery on the Satellite A200-1VO image?

    Hello

    I Satellite A200-1VO and want to give it its out of the box state, but it seems to have misplaced the recovery disk if it had one.

    Anone know how it reboot without it, or do I need?

    If you n t have original recovery disk, you can install the OS by using the original installation disc for Microsoft. All the necessary drivers, tools and utilities that you can download from the Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

    Problem is that, with the original recovery image you n t need valid product key and pre-installed OS will activate automatically. If you use the Microsoft disk you need activation key.

  • How to uninstall Microsoft Office trial on Satellite A200?

    I have a Satellite A200. It came with Vista Premium, but I've since upgraded to Ultimate. It came with a 60 day trial of Office 2007, which I'm not interested. I installed Office XP (that works). However the emails etc. documents will be opening in Word 2007. Installation because this causes an error, even if it still seems to work when you get rid of the error message.

    What I really want to do, is to uninstall the trial. However he won't let me - it goes through 'Preparation to uninstall' and then disappears and nothing has changed and the program is still there. In the Microsoft Office folder, 2 versions seem to have become intertwined. I uninstalled Office XP and tried to uninstall 2007 after that, but still no joy.

    Don't know if it has something to do with the fact that the installation did not complete successfully.
    Any ideas anyone on how to get rid of it?

    Val

    Usually, you should be able to remove applications in Windows Vista-> software settings.

    What you could do is to remove the whole Office 2007. The Office usually remains files here:
    C:\Program Files\Microsoft Office

    Then you can use a 3rd party freeware application called CCleaner to clean the registry!

    * Visit also the following: *.
    [How do I uninstall Office system 2007 if you cannot uninstall it by using Add / Remove Programs: http://support.microsoft.com/kb/928218]

    [Cannot uninstall Office 2007 beta of XP or Vista | http://www.tech-recipes.com/rx/1838/cannot_uninstall_office_2007_beta_xp_vista]

    Bye and good luck

Maybe you are looking for