How to create pages with a (not movable) menu scrolling fixed

Similar Questions

• How to create pages with tabs

  Hello

  I need to create a publication that has pages with tabs (index) by using InDesign. By "tabs", I'm not referring to the use of a tab character in the text of the space, but the design of the page to have a small additional part on the outside edge that can see beyond the other pages and describes a section. I need to have 10 these index pages where are the 10 sections of the book.

  You can create these in InDesign? If so, can you please tell me how?

  I'm sure that these tabs/index have a technical term, but I'm afraid that I don't know. I hope that I don't have everyone confused with my attempts to explain my problem.

  Thank you

  Steve

  !!  No worries!  I guess they'll be bigger than the rest of the pages?  If you work in CS5 you can do large pages in the document, but I would try and talk to the printer first on how they want the files provided.  They want all the standard pages provided as a single file and the tabs provided in another file.  In both cases, pages are normally set to the top pretty standard.

• How to create checkbox with HTML in the labels?

  How to create checkbox with HTML in the labels?
  If it is possible without the help of APEX_ITEM. BOX?

  Hello

  Yes you can do it. You just need to set * "Escape special characters" = No * in the area of 'Security' of the page box point you. But please be aware that this change could make your application vulnerable to XSS attacks in the case if users are allowed to enter data into the table that is used to fill the entries in the box.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• How to create objects with names being together & quot;. on the fly & quot;?

  Hello world
  
  I don't know how to create objects with different suffixes in their references "built" on the fly via loop 'for '. I mean, it's, 'typical' how to create a few sprites could be:
  
  var sprite1:Sprite = new Sprite();
  var sprite2:Sprite = new Sprite();
  container.addChild (sprite1);
  container.addChild (sprite2);
  
  and what happens if we want to create 100 these objects to aid 'for' loop so that we do not need to type:
  
  var sprite1:Sprite = new Sprite();
  var sprite2:Sprite = new Sprite();
  var sprite3:Sprite = new Sprite();
  var sprite4:Sprite = new Sprite();
  ...
  var sprite100:Sprite = new Sprite();
  
  the question is to know how to "integrate" the number name of the instance of the object during the creation of objects of mass? I remember some old "eval" and the square brackets "["objectName"+ objectId]" magic spells, but they do not seem to work in AS3
  
  Greetings
  

  :

• How to create ePUB with full-size images/pages to adjust according to the device?

  Friendly greetings,

  I tried, for almost two months, to convert/create my 7 books that are printed in electronic books; with the first edition had to be Nook, with Kindle on the list. Unfortunately, I am still working on just get the first one published! And I could really use any assistance to get this figured out. My intention was to publish several weeks ago... now my despair must publish before the weather gets too hot and the children are outdoors most of the time... or at least not later than Easter. (: 0)

  First of all, my books are books of photo/poetry for children of all ages. They were all designed in Photoshop, where I also created images full size for the first eBook. I received the specifications of B & N for the different devices of Nook. In the assumption that it would be better to create the largest files, thus allowing smaller size devices to fit the page accordingly to fit and the most important would not encumber a smaller image, I size my pages to 1280px x 1920px at 72 dpi. (now I hear 150 is standard?)

  My text is included in the image that design is an image = a single page. I've included a version only the full text of the poem/story at the end for those who want to set the text or use a voice reader. I obviously all original, but for the publication they were all saved as jpg.

  After a fight and a lot of frustration, I managed to finish the manuscript for Barnes and Noble Nook press Manuscript Editor. My internet is molasses and so much of this has been done in the wee hours of the morning when the rest of the time zone is asleep. I had only a page with a problem, an additional empty line/space was irreparable. I published and it had been completely sloppy to be published, although the preview looked a-okay. Only on the upper left of each image/page 1/6 was visible in the corner of my laptop to PC or Nook of my Tablet Android App. So I desperately waited another 10 hours, hoping that no one would buy my book Meanwhile, so he could be removed from the sale.

  I downloaded a demo of InDesign CC, and after two weeks of not even being able to create a new single document for some reason any twisted, I bought a month membership. So far, I am not entirely convinced of this creative Cloud malarkey together, as much... that, like I said my internet is slow... it took me nearly 20 hours just to download the software. (It is really difficult to provide records, seriously?) After a cat and a phone call that I can, in theory, now use InDesign.

  I created a new Document for Digital Publishing to the above specifications (1280 x 1920 px). I did rectangle the size of the page placeholders and place one image per page. This usually inserted the image to 50% and I have to select 100%, and then move them if necessary to place.

  So my first question is: is it possible to place an image at 100% without having to do this step further resizing? Or is there another way to place the image in the size of the page without any of these other measures that would be too good.

  Well, after placing several pages/images I have also selected each and went to Options of Export Object and checking the rasterization of Custom and "resize to text Flow.  I then exported ePUB trial to see how it would look. On the PC and tablet in landscape mode it was far better than the other, but about oh 1/3 from the bottom of each page was cut. On the Tablet, I turned to portrait and voila full page. Woohoo! But alas, I don't want to limit it.

  is there something I am doing wrong? Did I miss a step or two somewhere so that the complete picture should appear on the page? I feel like I'm about to turn the page on this thing, but he's stuck in the one after that.

  I would greatly appreciate any insight, advice, help anyone can offer. I ran the gauntlet of Barnes and Noble... cough, cough... support and apparently I ask questions that cannot respond to any press corner rep and the forums out there have no idea about InDesign. It's almost like with all fantastic beautiful screens out there today nobody wants to picture books! How National Geographic?

  Thank you very kindly.

  In case it is necessary: my laptop using Window 7 64 bit Pro, InDesign CC is 64-bit and my 10.1 Android tablet. I can view the EPUB files in the corners for PC and Nook for Android. I also have a Kindle, LumiRead and various other applications on the tablet. I also have someone get a glimpse of the finished epub, if needed, on a Mac, iPad, or Android phone... even if I don't have not one of these. Don't know who has a corner I can look good. Thanks again.

  Q: is it possible to place an image at 100% without having to do this step further resizing?

  Here I think you want your images to fit within size full page automatically. For this, you can try the following steps:

  1. create a new doc

  2. menu Goto object, and then choose image mount options

  3. Select adjust automatically and fitting drowdown, select "adjust the content to the frame. See the screenshot below:

  

  After that, your images should adjust automatically in full page placeholder images. Please let me know if this does not work or if the problem you are experiencing is different and I did not understand your problem correctly.

  Kind regards

  POOJA

• How to create album with photos stored in dropbox apple

  How to create an album of Apple with photos stored in dropbox?

  Import them into pictures (menu, file == > import - or drag them to the Photos icon in the Dock)-we can not do anything with photos not imported in the photo library

  LN

• How to create vpn with vista home premium on basis of vpn xp settings?

  I can connect to the vpn with xp machine, but when I try to imitate xp setting with machine to vista Home premium I can't connect to the same vpn. What do you suggest me?

  How to create a vpn connection in Vista: http://techrepublic.com.com/2346-1035_11-61437-1.html?tag=content;leftCol.  NOTE: I don't know what you mean "based" vpn xp settings, but you will have to do the best you can with the options and settings available in Vista (that I n "' t know how they compare to XP, but I hope that you will be able to do so because).

  Here is another article on the procedure: http://www.publicvpn.com/support/Vista.php.

  Here is an article on how configure a VPN with an ISP in Vista: http://www.web-articles.info/e/a/title/How-to-create-a-VPN-connection-over-your-ISP-connection/.

  Here is an article with a number of different other items all on vpn in Vista (I don't know exactly what type of configuration you "AVIC - as a host, as a customer, on what type of connection,--but this article covers many different aspects and I hope that at least a couple will be a help for you: http://compnetworking.about.com/od/vpnsetup/VPN_Setup_How_to_Set_Up_a_VPN.htm.)

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to create menus with CS4?

  Hello

  Just installed my new update for CS4 - since MX 2004 - and I am learning to create menus. Basic, drop, vertical, horizontal... I wonder if it is necessary to buy in these flash braidja extensions or if CS4 already has a how to create? As you can tell I'm new to this, and I looked at a few tutorials online with a lot of the good og info, but luck with menus.

  Thanks for the pointers!

  Testastretta wrote:

  Hello

  Just installed my new update for CS4 - since MX 2004 - and I am learning to create menus. Basic, drop, vertical, horizontal... I wonder if it is necessary to buy in these flash braidja extensions or if CS4 already has a how to create? As you can tell I'm new to this, and I looked at a few tutorials online with a lot of the good og info, but luck with menus.

  Thanks for the pointers!

  Of the basic css menus: horizontal / vertical:

  http://CSS.maxdesign.com.au/Listamatic/index.htm

  CSS Dropdown menus by Suckerfish:

  http://www.HtmlDog.com/articles/suckerfish/DropDowns/

  The Spry Menus:-already included with CS4

  http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS8B985763-4DFA-4415-B242-B2C2D7DED657a .html

  http://www.Adobe.com/devnet/Dreamweaver/articles/first_cs4_website_pt5_03.html

  --

  Nadia

  Adobe® Expert community: Dreamweaver

  http://www.perrelink.com.au

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  http://csstemplates.com.au/

  --------------------------------------------------

  http://Twitter.com/nadiap

• How to create page elements in the Office of discoverer

  Hi all
  any body can help me creating a page of items. How we create pageitems in discoverer.
  Thanks in advance.

  Hello

  When you select bussiness area and select the items that are required by the wizard of workbook. In step 3 of the wizard of workbook, you can check the page see the box and drag and drop the item you want to see in the page element section.

  Hope that helps you!

  Kind regards
  Murielle

• How to create text with a bar full of color boxes at the top of page 1/3?

  I am in the design of learning and using CS4

  I want to create a form with boxes like those below.

  

  I understand how to set a block of text on top with white text, but how can I box behind that bar (incl. rounded corners) color

  Once I have the design that I was intending to use the Adobe PDF software to use their tool to have a PDF form.

  So I would ask as I go about it in the right way?

  I appreciate any help - thanks a lot. John

  It is a multi-step process and can be done in a number of ways. Here's one way:

  Create a rectangle and rounded a corner. Then, create a column once, two-row table. Fill the upper cell with the blue wire. Make sure that it is a little wider than the original rounded rectangle. Cut the table to the Clipboard and then select the rounded rectangle frame and choose paste into.

  That should hopefully help you get started.

  Bob

• Adobe Reader - how to add page with the free version numbers?

  Hey guys,.

  Imagine that I have a PDF file and I want to create a new one by selecting some pages out of it. I know that this is all just possible using PDFcreator but I want to add page numbers. As far as I know that's not possible with the free version of Adobe, unless I would add the page number on each page by using a text box. I want to do different PDF catalogs for page numbers are really necessary. You have an idea how to solve this problem? You know that's about the only thing I need to add which means that it is not worth buying the Pro version. Unfortunately, I only got the PDF and I can't work on it for example with MS word before I have to export it. Do you know if there is a way to add the page numbers with a free version? There might be additional free software that allows this?

  Thanks for your support!

  You might be able to use Acrobat Standard (if Windows). Adobe have no free solution for your problem.

• How to create the input form (not a)

  Hello
  
  I just started working with oracle apex.
  
  I am creating a data entry form (register screen).
  When I create a new page, it always queries the entire underlying table.
  Users are only licensed to insert data.
  I searched everywher for a property to do so, but it seems not to be.
  
  Can someone tell me how to do Oracle Apex.
  
  Thank you
  
  PIM

  Hello

  Look at your form page. You want to open each text field and make the following settings; Source: Only when the current value in session state is zero

  Mike

• create Pages with editable cells form

  In the Pages have need create an order form 6 columns to send to clients on different platforms, with ONLY an editable column, the rest of the locked/protected form!

  Must keep the formatting when exporting to other formats, including PDFs.

  (probably not the first time someone got this case.)

  On iMac using Pages in iCloud.

  (In past I have used numbers but cannot export multiple form of numbers table as treats each separate table as the worksheet)

  Pages only works on selected versions of OS x and iOS, you can not do purchase orders for users on "multiple platforms".

  Pages retains its formatting so printed or exported to pdf, but you need to add the possibility of forms in Acrobat Pro.

  Peter

• How to create graphics with the constructor syntax

  How you can use the XXXBuilder class to generate graphs? I have this code:

  NumberAxis xa = NumberAxisBuilder.create().lowerBound(0.0).upperBound(10.0).build();
  NumberAxis ya = NumberAxisBuilder.create().lowerBound(-10.0).upperBound(10.0).build();
  ScatterChart<Number, Number> chart = ScatterChartBuilder.create().XAxis(xa).YAxis(ya).build();

  But I get:
  error: the reference to create is ambiguous, the method create() in RegionBuilder and < X, Y > method create() in ScatterChartBuilder match
  ScatterChart < number >, table = ScatterChartBuilder.create (). XAxis (xa). YAxis (ya) infrastructure ();
  ^
  where X, Y are variables of type:
  X extends the object declared in the < X, Y > method create()
  It extends the object declared in the < X, Y > method create()
  
  How can I resolve the ambiguity?
  
  Pete
  (it's 1.7.0_06 JDK, JavaFX 2.2.0 - b21)

  Probably a bug in the ChartBuilders or the JDK.

  ScatterChartBuilder.create().build(); // does not work either.
  

  javac is unable to determine if the create() method of SceneChartBuilder or the create() method of RegionBuilder must be applied.
  The AxisBuilders arising also from RegionBuilder work because they do not identify their own obscure create with generic type information method.

  How can I resolve the ambiguity?

  New ScatterChart ;-)

• Help on how to create pages html for EBS

  Hi all
  I am wanting to branch out to the development of some and envisages the creation of pages html customized for EBS.
  One of the examples I would like to make is an html page where the user can select a template (defined in PA) project, enter a project name and submit the request.
  The page will send the data entered via API where the project will be created.
  
  Can someone recommend the best approach to go down? (and not with respect to the actual real example, but for the technology to use i.e. APEX etc..)
  
  See you soon,.
  Russell H.

  Hi Russell,

  in the slot location, topic "Custom HTML" is there, please take a look, it may be useful for you. (not sure).

  jdevdoc\WebHelp\devguide\devguide.htm

  Kind regards
  Naren.