How to deal with DNS suffixes

Similar Questions

• How to deal with analysis PC Performance & Stability Report

  Yesterday, when I just walked into my Office Xp, an error report in a program called... uh, PC Performance & Stability Report analysis, can possibly be, telling me to correct these errors have shown under its professional service.
  How to deal with him?
  Thank you for your advice it.

  Hello MeriClaybron,

  1. have you installed any show analyzing the program on your computer?

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Apparently, my memory is almost full - no idea how to deal with not having a novice such am - sd card

  Apparently, my memory is almost full - no idea how to deal with not having a novice such am - sd card

  Hi sixty.

  It can also be a good idea to begin to transfer the content from your phone to a PC/Mac to help reduce the storage room.

  It is a process usually easy, just plug the unit to a PC, on the phone screen select MTP mode when it appears.

  Once finished, you just have to access the phone's internal memory and transfer pictures/videos from the DCIM folder.

  Let us know if you need help in this kind of task.

• How to deal with operating system windows 8.1 and apps on usb device

  Hi, I have a laptop Lenovo G505. Windows 8 64-bit was preinstalled in it. Later, I upgraded to 8.1. Laptop is almost 9 months and still under warranty. Since a few days, built Lenovo solution Center alert this analysis of hardware detected failures in one or more devices. On suggestion of Lenovo, I ran hdtune pro app in my machine and it also detected 3 hard drive errors. As my machine is under warranty, Lenovo is ready to replace my hard drive with a new one. But they say that it is the responsibility of the customer to return the windows 8.1 operating system and install in the new drive and their liability is limited to the replacement of the hard disk only. I am not computer savvy and I request concerned to guide me how to deal with operating system windows 8.1 on external media like USB, DVD, and install in the new drive. I also installed a number of apps and paid games. Therefore, I would like to resume these games also files so that I need not buy again. Assistance in this regard is required.

  Hello Mohan,

  Thanks for posting your query in Microsoft Community Forum.

  I can of course understand the situation and will be happy to help with your query.

  Let me ask you;

  • You have the key product for Windows 8 or 8.1?

  You can create an installation media (DVD/USB) for Windows 8.1 and re-install when you want. However, in order to create an installation media for Windows 8.1, you need the product key. If you don't have the product key for Windows 8.1, you can not create installation media.

  You can create the installation media for Windows 8 by using the product key Windows 8 If you have. In this case, install you Windows 8 first and then go to Windows 8.1 through store.

  As far as your paid apps (purchased by store) are concerned, you should be able to install them as soon as you sign in with the same Microsoft Account where apps were purchased.

  You can see the steps indicated by Ronnie Vernon replied on 24 December2013, re - install paid apps.

  You can follow the steps below to create installation media.

  1. Run the program Windows 8.1 configuration or installation of Windows 8 (depending on the availability of the product key for the specific operating system.

  2. When you are prompted to run or save the file, choose run

  3. When you are prompted to enter a product key, enter the 25-character product key, that you received when you purchased Windows 8.1 (or Windows 8).

  4. When you are prompted to install Windows 8.1 (or Windows 8), select install by creating media and then click Next.

  5. Select the type of media you want to use: either a Flash DRIVE or a DVD.

  To create a USB flash drive

  1. Click on the USB flash drive.

  2. Plug the USB key into a USB port on your PC.

  3. When you are prompted, select the USB key that you want to use, and then click Next.

     If you have files on the USB flash drive, it will remove them.

  To create a DVD

  1. Click on the ISO file , and then select the location where to save the ISO file.

  2. Insert a blank recordable DVD into your DVD drive.

  3. Burn the ISO of the DVD file using Windows disc Image burner, or another program DVD burning.

  Note: Ensure that the USB or DVD key that you use has nothing else stored on it and has a sufficient free space to download the Windows 8.1 Installer: about 2.3 GB for the 64-bit version.

  You can also read the article below to create a USB stick recovery.

  Create a recovery USB disk

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• After the recent update on 06/01/2016, pdf files created on the Tamil language there are blank pages. How to deal with all this?

  After updated recent Acrobat reader, dated 06/01/2016, files already created with Tamil fonts show blank pages. How to deal with all this?

  Hi tnrk64,

  We just released Acrobat Reader for iOS version 15.4 on 23 January 2016.

  This version includes the special snag you have met.

  Would you please try it and let us know if it works for you?

  If you have problems with Acrobat Reader on the Apple App Store update, please take a look at the following page for advice: http://adobe.com/go/updatehelp

  Thank you!

• How to deal with the change in scope

  Dear,

  No org by enforcement period. Consolidation of the CDA. CDA entry.

  September, a company (X) is thrown into a perimeter (a-frame) and granted in a different consolidation perimeter (part B).

  I need perform the following acts:

  (A) CDA profit & loss of X, from September, must contribute to A scope results until December;

  (B) BAT profits/losses of X in September, October and December, must contribute to the results of scope B until December.

  (Operations under A) and B) can be automated? No idea how to do?

  I don't have a script. I need only a generic description on how you did.

  Thank you very much!

  According to my experience, assuming that you create a new entity for X under parent B, the best thing to do in these situations is to simply manage it via a journal entry.  You will write a day who would keep the CDA P & L (and in our cash flow of CDA case) result of X to the title of parent with equal and opposite impact hitting the new entity of X under B.  You post this journal in Sep, Oct, Nov and dec and continue loading data for a YEAR to X under B.

  However, if you simply drag & drop X under a new parent, I don't know how you deal with it.

  Kind regards
  Jason

• How to deal with the table still growing?

  All tables are more and more applications. In some applications, tables become quickly more and more wide. How to deal with this problem?
  Currently I develop an application system. Should I add a large number of orders to remove the code for each table?

  The problem is delete is very time consuming.

• Help: How to deal with the character of the line following in utl_file.put_line?

  Hello
  
  We try to generate a flat file from an Oracle table through utl_file.put_line. He is troubled with the Fed line of character. How deal with him or another way to do this?
  
  Any suggestions are greatly appreciated.
  
  Thank you.
  Jimmy

  I assume that your database is running on unix/linux?

  Try to use UTL_FILE. PUT (Data), followed by a UTL_FILE. PUT (CHR (13): 10;)

• How to deal with late payments for creative cloud

  My payment does not pass and I deal with once again, since there is only a technical problem with my card provider. What should I do (Adobe mail indicates only the change payment method, which I'm not interested)

  Thank you

  G

  Hi Melissa,

  Please, contact support by chat/call in order to get corrected billing queries.

  Contact the customer service

  * Be sure that you are connected to your Adobe account while accessing the link *.

  Kind regards

  Sheena

• Re-setup of PC, how to deal with the installation of cloud

  Hi, I need to re - install my Lenovo WS (WIN8.1). At the time of avant-nuage, I had simply disable my Adobe software and reactivate after installation of operating system. How it works with my apps of cloud? What is the process today?

  Given that it is more or less a common problem that I was looking for a database of standard support entry, but I was not able to find something to help.

  Thank you

  Sven

  It is easier.  You can disconnect before wiping your pc, but you don't need to.  with cc, you can even log out of the old 'dead' computers using a new computer.

  Just do whatever you need to do and when you are ready to install cc, start downloading an app of cc (after signing with your adobe of subscriber id) and will install the desktop application, https://creative.adobe.com/

• regexp: how to deal with different date formats?

  the date comes as varchar2 with '-'and':' as separators for day part and part time respectively. but it may come with different formats such as
  
  1993-05-17
  1993-05-17 13:04:23
  1993-05-17 13:04
  1993-05-17 13:4
  1993-05-17 13:04
  1993-05-17 13:4:2
  1993-5-17-13:4:2
  1993-5-7-13:4:2
  
  and so on. date of final format should be ' YYYY-MM-DD HH24-SS'. is it possible to have an intelligent way to deal with different formats of date with separators above and convert the final using regexp format, so that it is compact and universal as possible with assumptions/examples above?
  
  Thank you

  As others have said, the smartest way is to keep your input in a format method and store your data in a date column.
  But is a simple way to deal with this mess, without regexp,

  with test as (
  select '1993-05-17' d from dual
  union all select '1993-05-17 13:04:23' from dual
  union all select '1993-05-17 13:04' from dual
  union all select '1993-05-17 13:4' from dual
  union all select '1993-05-17 13:4:2' from dual
  union all select '1993-5-17 13:4:2' from dual
  union all select '1993-5-7 13:4:2' from dual
  union all select '1993-05-17 1:4 PM' from dual
  )
  select d
       , to_date( translate( d, 'xampAMP', 'x' )
                , 'yyyy-mm-dd hh24:mi:ss'
                )
       + case when instr( upper( d ), 'P' ) > 0 then 0.5 else 0 end cd
  from test
  

• How to deal with information coming from the disk utility - repair?

  I managed courses of recovery of disk space in my SSD. However, I don't know what to do about this:

  After recovering in the SSD space, I ran the option in DiskUtility 'fix' with these results:

  1 volume bitmap needs minor repairs for orphan blocks

  2 save file system exit code is 8

  3 operation was successful.

  I ran it again, the function of repair with these results:

  1 Macintosh volume has been found damaged and must be repaired

  2 save file system exit code is 8

  3 operation was successful.

  Hoping that the repair function had solved the problem, I ran it again with these results:

  1 volume bitmap needs minor repairs for orphan blocks

  2 save file system exit code is 8

  3 operation was successful.

  Thought that I needed to restart the device. After the re - start disk repair utility told me:

  1 volume bitmap needs minor repairs for orphan blocks

  Invalid 2 free block count

  (it should be 33309635 instead of 333008871)

  3 save file system exit code is 8

  3 operation was successful.

  What is my next step?

  Should I ignore this message?

  If this isn't the case, it must be repaired, and how do I do this?

  Is this something that would need to get a new drive?

  Thank you

  If you don't have a good backup make one now. Always keep your Mac backed up on an external drive with Time Machine or utility of cloning like SuperDuperordouble clone.

  Next step is to clear and re - format the hard drive and then restore your system from now the command option + R keys

  OS X: on OS X Recovery - Apple Support

• How to deal with "Outlook" pst files

  Hi guys, just a message quicky, for various reasons in recent weeks I have had problems with my Microsoft Outlook, which I use for e-mail, etc.. I have created a number of .pst files and would like some advice as to how best to group them into a single pst file.

  Is it possible and how do I proceed.

  Regards david

  Hello

  Yes, you can combine/merge/join the files using the following (from Outlook) process:

  http://semnaitik.WordPress.com/2013/06/19/how-to-combine-multiple-Outlook-PST-files-into-a-single-file/

  or use a third-party tool:

  http://www.WikiHow.com/merge-two-pst-files-in-Microsoft-Outlook

  Kind regards.

• How to deal with error 80070652 downloading Windows 10

  I'm trying to upgrade Windows 7 Professional to Windows 10 but get error 80070652 how clear this to install the upgrade. I'm not a geek, so it should be a simple procedure please. It is a 64-bit operating system

  If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you find it difficult to do some of the steps below, please see instructions how do their:

  http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• How to deal with a hard disk of PCs running on statup for 11 minutes without any input from me?

  I have a Quad core PC with MSE running MBAM and more Superantispyware (free versions) as dormant backups.   I run successive backups to ensure a virus free PC and Superantispyware removes unwanted cookies, etc.  Two versions of antivirus means that if it fails to find the other could, for example, once found MBAM and removed leads and associated tentacles when MSE was not all the times that I have connection, a HD works significantly until 11 minutes before it stops...  I used the Manager tasks to see if I can find all the programs that are running constantly.  Perhaps MSE is looking for the virus or the WD backup is running.   I can't imagine that any security or backup would keep a HD running so often for so long when I login at start-up or otherwise.

  How can I check what I am experiencing is normal?

  John

  You may just want to run us a trace using the option of starting (or restarting) fast

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask