How to detect an interaction of the user with a VerticalFieldManager object?

Similar Questions

• Object of Interaction of the user in a workflow

  Hi, hoping someone can help with my VM build workflow that uses a predefined as input XML file.

  I want the end user to confirm the XML values before the start of the construction so I dropped in a purpose of the interaction with the user who essentially just relays back to the user attributes. It is an additional Boolean attribute here asking the user whether or not the values are correct.

  First of all, I would like to make the presentation read-only fields, is it possible?

  Secondly, how can I control the workflow by the result of the Boolean attribute - Yes, these values are correct - continue to build, or not, there is an error - cancel the workflow with an error.

  Boring if you click Cancel on the interaction of the user it is always there in the background waiting for input - you can change what buttons are visible (or what they are doing?)

  Thank you very much in advance.

  Regarding the presentation of entries in a read-only mode, the other guys listed above there is not readonly attribute... but, the workaround for this is to use these entries as part of the description of a group or a stage of presentation in this format:

  ${VariableName}

  The values are presented as part of the description which means see the values, they cannot change their

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• How to download my photo as the user's windows picture, how do I add my profile in the OS as an administrator

  How to download my photo as the user's windows picture, how to add my profile in windows OS (vista, xp, win98se) as an administrator windows/PC?

  Hello

  You can choose an image that will be associated with your user account and shown on screens or menus that display your user name, such as the home screen or the start menu.

  Follow the steps in the article mentioned below:

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Choose-a-picture-for-your-user-account-and-Start-menu

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ua_picture_change_w.mspx?mfr=true

• How to create a password for the user account for my child?

  How to create a password for the user account for my child?

  You can create the user with the parental control account. This will act as a protection for the child's account.

  You can take a look at the following links on setting up parental controls:

  http://Windows.Microsoft.com/en-us/Windows/set-up-family-safety#set-up-family-safety=Windows-7

  http://Windows.Microsoft.com/en-us/Windows/set-parental-controls#1TC=Windows-7

  http://www.howtogeek.com/HOWTO/10524/how-to-use-parental-controls-in-Windows-7/

• How to add a second connection of the user with windows 8

  How to add a second connection of the user with windows 8

  Go to the Control Panel, then click on change the Type of account in respect of the accounts of users and parental control.  Beneath the box with user accounts, there should be a link that says add a user account.  Click on that and follow the instructions to set up another user.

• How to get more information about the user using SecurityContext ADF?

  Hello.

  In my application I have a table use:

  CREATE TABLE ("ADM_USERS"

  ACTIVATE THE 'ID' NUMBER(*,0) NOT NULL,

  ACTIVATE THE 'U_NAME' VARCHAR2 (30 BYTE) NOT NULL,

  ACTIVATE THE "U_PASS" VARCHAR2 (255 BYTE) NOT NULL,

  VARCHAR2 (30 BYTE) "NAME."

  VARCHAR2 (30 BYTE) 'NAME')

  I configured the WebLogic environment using the the "reading- SQL only the authentication provider ' and then I configured ADF Security as ADF authentication -> Forms -authentication.

  I connect the user using the method of ""doLogin " and all that working properly. "

  
  

  public String doLogin() {}

  String _username =;

  Byte [] pw = _password.getBytes ();

  FacesContext fctx = FacesContext.getCurrentInstance ();

  HttpServletRequest request = (HttpServletRequest) () .getRequest () fctx.getExternalContext;

  try {}

  Topic topic = Authentication.login (new URLCallbackHandler (UN, pw));

  ServletAuthentication.runAs (object, request);

  String loginUrl = "/ adfAuthentication?success_url=/faces/Registry.jsf";

  HttpServletResponse response = (HttpServletResponse) fctx.getExternalContext (m:System.NET.FtpWebRequest.GetResponse ());

  sendForward (request, response, loginUrl);

  } catch (FailedLoginException fle) {}

  FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, "Incorrect name or password","Incorrect name or password" "");

  fctx.addMessage (null, msg);

  } catch {} (the LoginException)

  reportUnexpectedLoginError ("LoginException", the);

  }

  Returns a null value.

  }
  

  securityContext.userName returns the value of the 'U_NAME '.

  How to make more information on the user connected such as NAME, ID, first NAME?

  
  

  And the second question:

  How to store the value of the field 'ID' in table 'ADM_USERS' in any table with the 'IDUSER' with objects of entity created in application scope?

  
  

  Concerning

  Darek
  

  
  

  securityContext.userName returns the value of the 'U_NAME '.
  How can I get more information about the user logged as NAME, first NAME, ID?

  You can not.

  You need to query DB.

  How to store the value of the field 'ID' in table 'ADM_USERS' in any table with the 'IDUSER' with objects of entity created in application scope?

  Record this value in UserData structure so it will be available in the model. http://andrejusb.blogspot.com/2012/05/solution-for-sharing-global-user-data.html

  Then use as default expression for your objects of entity attributes (something like: adf.userSession.userData.yourUserDataVar).

  Dario

• The element of Interaction of the user does not correct my Boolean attribute value

  Hello

  I'm just starting using the element of User Interaction. In my workflow, I set several attributes - some string and a Boolean value. I have a script task that makes treatment and eventually set these attributes. I then a piece of User Interaction that has these characteristics than external contributions. The Interaction of the user unit shows the correct values to strings, but the Boolean value is always shown as wrong - regardless of what I put the attribute in the script task immediately preceding.

  I'm confused. I plugged everything in the binding in the same way, but it does not seem to reflect the State of the attribute. I can switch the Boolean value in the Interaction of the user and the attribute is replaced as expected.

  Thank you

  Edit: I have reproduced this issue with a very simple affair. Make a new workflow and put only a part of the Interaction of the user in it. In the UI element, create an external of entry as a Boolean attribute of the workflow. Default font to True/Yes. When you run the workflow, the user interface element shows the value as a no.?

  Hello

  Looks like a bug in the client Java vRO (but works in vSphere client to Web). I am able to reproduce it in my environment, on the two vRO 6.x and 7.0.

  I'll open a PR in order to track and remedy in the future vRO releases.

  BTW, I vaguely remember there is a reported similar problem long time for vCO 4.x. It seems that the problem has reappeared again in silence

• How to create the file on a location where the user with rights?

  Hello
  I have a requirement in my application a lot of program thatcreating a report to a file and it is written in a user's location. Now he specified directly as (c:\ or d:\...).
  
  The problem is that the user does not have right to access that directory. What I suggest, or I want to create is special reports on a location where the user with rights.
  
  Essentially in Windows system % UserProfile % having right to do anyting. Assume that the operating system that is installed in C: the % UserProfile % c:\documents and Settings\nom_utilisateur or D: then D:\Document and user Settings\nom.
  
  How do I get this help please me.
  
  Good help will be appreciated.
  
  Iqbal

  Hello
  The best practice would be to create the file in My Documents for the user currently logged in windows.

  Unfortunately, you did not mention your version of forms. In an older version like 6.x it is function in the library of d2kwutil called Read_Registry in the win_api_environment section, and in the more recent versions the same availble function in the library webutil to client_ name.

  So, you can read the registry database for the current logged in user using the function mentioned above of the location next to the register.
  My Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell folders

  There is an entry named personal. Read the path of this entry when running while generating / record file to the customer's location and save the file in this path.

  -Clément

• How do know us that now the user using the server component

  Hi all
  
  Suppose a user loged in to the siebel application.and requested for an object manager/component.and as the user who got. But this particular component is active in a portion so how do we know that now the user using the component.means Server user is in what server to use this object manager component.
  
  
  Concerning
  Remy

  Using Server Manager, to connect without specifying a server, then run a command to sessions list for your device and you will see the user and the server.
  Best regards
  EvtLoglvl

• How to provide the user with a list of files to download...

  Hai...
  
  I downloaded the file correctly... now, you should download the file... which has been downloaded... for that we have implemnted the query in the form...
  
  Select max (id) of APEX_APPLICATION_FILES , later transferred record here will be retrieved and shown.
  
  Now, we want to provide the user with a list of files to download...Dat, is that it should be on the list files that are no dat, he must select a single file to download?
  can u please tell me how to do...
  
  
  
  David

  Hi David,

  The reason why I proposed to do this is to display date CREATED_ON as you want in the report. If you do not do this, the date can be displayed in a format that you don't like. You don't have to do this bit, if you do not want.

  For example, if you do not set the size, the date may appear as:

  6 NOVEMBER 08

  But, if you set the format, you can get:

  2008-06-11 12:13:15

  It is up to you.

  Andy

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Network says it has detected another computer on the network with my IP address.

  Original title: ip addy

  My internet access icon said that it has detected another computer on the network with my ip address, is there something that I have to take

  Try restarting your router.  It should solve the problem.

• Create the user with privileges only data entry.

  Hello guys,.

  A very basic question. I created the request of APEX, well obviously the user with whom I created this application has developer access, now I want to create a user who is able to see the developed application, I tried to find the user options, but could not.  Someone can help me to find the option, I need to follow, so that the newly created user is only able to enter data into forms and run reports and should not be able to make changes in the application developed.

  Concerning

  Faisal Niazi says:

  A very basic question. I created the request of APEX, well obviously the user with whom I created this application has developer access, now I want to create a user who is able to see the developed application, I tried to find the user options, but could not.  Someone can help me to find the option, I need to follow, so that the newly created user is only able to enter data into forms and run reports and should not be able to make changes in the application developed.

  Create 'end users' by selecting No for the user is an administrator of the workspace and the user is a developer account privilege options create new user accounts. These users connect to the APEX Application Builder. It can be given direct access to a request by specifying the ID of the application or alias to the URL:

  apex.oracle.com/pls/apex/f?p=

  or

  apex.oracle.com/pls/apex/f?p=

  Using an alias for the application is recommended.

  To restrict user access to pages, components and specific applications, create authorisation schemes and the apply to the application level.

• How to call a method of the AM with parameters of Bean managed?

  Hello world
  
  I have a situation where I need to call the Managed bean (setDefaultSubInv) AM, under value changes Listner method. Here's what I do, I added the AM method on page links, and then at the bean call it
  
  Class [] paramTypes = {};
  Object [] params = {};
  invokeEL ("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
  
  It works and be able to call this method, if there are no parameters. Say that I pass a parameter to setDefaultSubInv(String a) method AM, I tried to call it bean but raise an error
  
  The string available = 'test ';
  Class [] paramTypes = {String.class};
  Object [] params = {DISP};
  invokeEL ("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
  
  I'm not sure this is the right way to call the method with parameters. Can anyone tell how to call a method of the AM with bean to manage settings
  
  Thank you
  San.

  Just do the following

  1. your method in the Client Interface.
  2 - Add to Page Def.
  3 - Customize your Script like below one to reach your goal.

  BindingContainer links = getBindings();
  OperationBinding operationBinding = bindings.getOperationBinding("GetUserRoles");
  operationBinding.getParamsMap () .put ("username", "oracle");
  operationBinding.getParamsMap () .put ("role", "F1211");
  operationBinding.getParamsMap () .put ("Connection", "JDBC");
  Object result = operationBinding.execute ();
  If (! operationBinding.getErrors () .isEmpty ()) {}
  Returns a null value.
  }
  Returns a null value.
  }

  I hope it helps you
  Thank you