How to detect "to bring to the Center" graphic cursor events

Similar Questions

• Execution of 'bringing to the Center' on a free cursor in a graph XY of the newspaper brings the cursor to the top edge of the graphic (instead of Center)

  Dear support,

  Dear users of LV,

  by selecting "make to the Center" for a free cursor in a XY graph has no
  Place the cursor in the center of the chart, but rather the order brings to the
  average/average value. This isn't a problem for a linear
  axis [due to the fact that the center of the axis is equal to]
  medium/medium value of the points on the axis end]. But when
  mapping of the axis is logarithmic, the cursor is found on top of the
  the screen. This is because the average value of the end tip
  ((min (y_axis) + max (y_axis)) / 2) does not match the center of the axle.

  What's the desired behavior, please?

  Example: For a y_axis = [1.100], to the highly anticipated pivot post would be
  10 and no to 50.5. The central position for the logarithmic mapping
  must be calculated as (log (min (y_axis)) + log (max (y_axis))) / 2, IMHO.

  Kind regards

  Lynn,

  It is certainly no bug. You can make a feature request.

  I can't climb this case. LabVIEW wants this behavior.

  It may be possible to program a work around with a property node.

  Richard

• How to detect fraud sites on the net

  in fact, I came to know websites are offering you opportunities to earn money on the internet by clicking on the sites for example 'two Dollar click'. I want you please teach me how to detect its authentication and its evidence.

  Thank you

  The short answer is, "if it sounds too good to be true, it probably is." Any site that promises you money easy to 'make things you already all days' or 'just by ' is likely to be a scam waiting to be discovered.  The same goes for any flavor of 'Go this expensive piece of equipment for only a few dollars' or ' work from home and make thousands of dollars.

  There are dozens of these sites that go upwards and downwards and save it under a new name every day so it's really not anything to sure to check a site and determine if it is a scam or not.  Common sense is your best guide.  The only "secret: 'this scammer really knows how to separate a fool and his money access."

• How to create a circle from the Center?

  Hello. I'm using PS CS3 and I want to create a perfect circle around the Center. How do you do that?

  I know not pressing SHIFT while dragging makes it perfectly round. I also read that pressing alt at the same time he draws in the Center, but it does not work, it just all just with the eyedropper tool. Am I missing something or is there another way to do it?

  Thank you.

  Hello

  If you click and hold the mouse pointer and press the Alt key and drag, it should work.

  In addition, once you start dragging, add the SHIFT key to constrain to a circle.

• How to align a bearing at the Center? CS5

  Hello.

  I tried for hours to align a button bearing to the center of my container, but no matter what I tried, the reversal did not move.

  That's how I inserted the animated button:
  

  I clicked Insert > Image objects > rollover, Image type the name of the Image, image, image rollover, text replacement and URL in the dialog box insert a Rollover Image , and clicked OK.

  I looked my index.html in design mode file and saw that the reversal has been aligned to the left.
  

  I then looked at my index.html file in Code view and saw that the reversal has been placed as follows under < / head >

  < onload of the body = ' MM_preloadImages ("'email button 2.png") ' >
  < a href = "index.html" onmouseout = "MM_swapImgRestore()" onmouseover = "MM_swapImage ('email_button',", 'email button 2.png', 1) "> ". < img src = "email button 1.png" alt= "reversal of email button" name = "email_button" width = "118" height = "47" border = "0" id= "email_button" / > < /a >

  < / body >
  

  What should I do for align the reversal at the Center?

  I'll be so happy if someone can help me!
  

  Insert the bottom directly above the closing tag.

  I think, unfortunately, that you won't get very far without understanding bassic html and css.

• How do you evolve mc of the Center?

  Howdy.

  I created a movieclip with programming and added an image via the xml loader. I'm scaling down using tweenlite. But he played as if the registration point is in the upper left corner of the image. Do you know how to change it so it puts the Center-wide?

  Thank you for any intelligence that you give!

  Basically what you need to do, it is have a movieclip to accommodate the image and then look the image as it is centered about alignment of the movieclip.  Then you manipulate the movieclip as if it were the image.  In the code example below an mc of the rectangle of the library with a class ID of AnImage is used instead of an image for demonstration purposes...

  var eMC:MovieClip = new MovieClip(); create empty mc to contain the image
  eMC.x = 200;
  eMC.y = 200;
  var img:AnImage = new AnImage(); incorporate the image
  eMC.addChild (img);  Add images as child of empty mc
  IMG.x = - 1 * img.width / 2; Center of the image on the CTM registration point of the image
  IMG.y = - 1 * img.height / 2;
  addChild (eMC); Add the mc to the display list

  function turnBox(evt:Event):void {}
  eMC.rotation += 5;
  }
  box.addEventListener (Event.ENTER_FRAME, turnBox);

• How to cut a hole in the center of a clip/layer?

  I need to cut a hole in the center of a clip so that the layer below shows through.

  The reason why I need to do this is their opacities are constantly changing and it creates unwanted shadows where the layers overlap.

  An inverse function of harvest would be ideal. Anyway is to reproduce this effect?

  You can use a cache by opposite approach to achieve this.

  Draw a white shape in the Titler.

  Place the on the clamp.

  Drop effect hiding approach on clip.

  Set it to the form and check the reverse.

  You can also use the circle to create a round hole.

  Drop it on the clip.

  Check reverse circle and the stencil alpha blend Mode

• How to remove invisible reference to the imported graphic?

  I recently moved a book in a new folder, now when I open my accompanying document, framework asks for the location of an imported graphic, that it does not. As far as I know, I deleted this graph imported for a long time. I don't see a paragraph mark for this on the page the list of references gives for this. It is not visible on the body or template pages. No gray rectangle anywhere.

  How can I find and delete this invisible reference?

  When I click on ignore the missing graphic box, he asked again the next time I open the document. When I open the document in Notepad, I see the name of the chart he needs. Can I just remove this name using Notepad? (Suspect who would be too good to be true).

  Thanks for any help on yet another problem of Frame not covered in the documentation.

  John, I think if I were you I would recreate the terms of coverage. It shouldn't take too long-

  • Create a new file of FM.
  • Save the new file as "coverNew.fm" (or other)
  • With only these two files open on the FM band and the new file as the 'active' file, make file > import > Formats. Don't forget that the ' import to ' at the top of the dialog box specifies the old file. Import all formats. Save the new file.
  • If you have a text on the old file, click the cursor anywhere in the text and do Ctl + a to select all the text in the stream.
  • In the new file, click the cursor in the empty text frame and do Ctl + v to paste. Save the new file.
  • For the new graphic, draw a graphic image on the page where you want to be placed.
  • In the old file, select the chart by clicking on it - don't forget to click just above, don't do Ctl + a or you might get inadvertently old graphics too. Do Ctrl + c to copy.
  • In the new file, select the empty graphic block, you just create and do Ctl + v to paste. Save the new file.
  • Then, when you have your new file with all the transferred content, close the old file. Make file save as to name the new file the same name as the old file.

  Let us know how you go.

• How to detect incoming calls in the background?

  Hello

  our application works in the background (and playes audio). We are looking for a way to detect incoming calls (and to stop playing).

  It comes to CLDC app, not a moped.

  Is it possible in background mode and how? In which case I can listen?

  If not, is it possible in the leading fashion and how?

  I guess we can add a net.rim.blackberry.api.phone.PhoneListener and use the callIncoming method
  in the main application, but it works in background mode?

  If anyone can confirm, I would appreciate... Thank you...

  @ BBDev, but when a call is incoming, and then sound stops automatically right? And we don't have to capture the event however!

  Thank you!

• How to detect Plug and unplug the card nidaqmx programmatically

  I have a card NI6218 DAQmx. It is the peripheral USB card. I wanted to follow the event when the data card is connected to a usb drive by programming (in c# specifically).

  Is there an API / event triggered by the NIDAQ assemblies will give me the status of the map above is connected or plugged-out as USB device?

  Hi Nilesh,

  There is a feature in LabVIEW 'VISA find resource VI' that you can use to detect the devices that are connected to the computer.

• How to detect solar cells of the image

  Hi all

  Sorry, I posted this question on the other forum but received no response. Please help me in this task. Actually, trying to detect the solar cell off image and I thought of making a histogram of the image could be a first step, but I'm not the case now. Could you please provide me with an example of similar task which can be useful. Thank you

  Concerning

  Your original thread is not dead.  I propose to close this thread and stuck with the original.

  Hell!  Meanwhile the other thread made reference to this.  It seems that you now have to maintain two threads for a question...

• How to detect an interaction of the user with a VerticalFieldManager object?

  Hello

  It is a question for those who have more experience with gui on BB things.  I use the eclipse with Simulator pack 6 and 9800 component plugin.

  I have a VerticalFieldManager (VFM) object that contains a few fields menu. I would like to detect when the user attempts to modify one of these fields, to load a file and update the menus. The thing is that these menus are usually not changed by a user, perhaps only once for the time up-front, something like the choice of your country and city and other, then you will not change that the next time around. So I want to avoid loading the file and simply use the settings saved in the place. Here is what I tried and the solutions I've had but NOT as aestatically

  (1) I can not load the file as a response to one of the modification of fields (using setChangeListener) because it is already too late and the present menu is outdated.

  (2) I can add a checkbox to the optimization of resources and take care to load the file and update the menus there. It works, but I DON'T want. It's ugly and not easy to flow!

  (3) I tried to setChangeListener for the optimization of resources, but it receives no change! Here is the code for my VFM:

  the final private class OkVerticalFieldManager extends VerticalFieldManager implements FieldChangeListener
  {
  ----------------------------

  ----------------------------

  ' Public Sub fieldChanged (field field, int context)
  {
  If ((contexte & FieldChangeListener.PROGRAMMATIC) == 0)
  {

  ----------------------------------------------

  -------------------------------------------

  }

  }

  }

  (4) I tried to listen to reminder to focus on the optimization of resources, but it is called by display from the beginning and it seems that I can't control it. I mean I don't want to be called until the user actually click on the object.

  So I hope that there is a better way to detect a user of ANY click or an interaction with the optimization of resources and I catch and do my thing, before the opening of the menus in there.

  Hope that this clear enough.

  Thank you.

  A few possibilities:

  1. you can check the field with emphasis (to use VOR getLeafFieldWithFocus()) in your makeMenu() and branch accordingly.

  2. you can define listener focus on each field change and bake menu items when its focusChanged() method is called with equal to FOCUS_GAINED eventType. There you can check the setting of field and prepare the relevant menu items.

  You can use the same setCookie/getCookie approach I have proposed before in both scenarios if you wish.

• Muse - how to align an object to the center of the browser window?

  Hi all!

  I would like to have a widget that is aligned to the bottom of the browser window. The intention is, what is the size of the window, the widget will appear so many pixels above the bottom edge.

  Thanks for your help.

  Philippe

  Hi Philippe,.

  You can lock your widget in the lower center of the browser window by using the option of the PIN at the top right of your screen of muse. Let me know if it helps.

  Emily

• How to align Divs PA in the Center if my page is centered?

  My page is centered and seems perfect, but AP div tags appearing on each page are all aligned to the left.

  Whatever I do to change that, no matter what, they are all still aligned left.

  Does anyone know how to adapt the code or whatever it is that will make the Divs aligned PA centered as well?

  Thank you

  I found the link below useful, see if it helps you too

  http://www.fionasansom.com/assets/how_to_center/centre_in_browser.html

• How to display 4 charts on the same graphic screen when executing the VI 4 times?

  My goal is trying to show 4 different graphs on the same XY graph when I run the VI 4 times. Right now, the new graph will be to saturate the previous graph when I re - run the VI.

  Help, please!

  You need a mechanism to store the previous data; LabVIEW graphics have no history, they display data sets.  A shift register is an obvious answer, but it can be a little 'tricky' when the XY graph build is used because it accepts a DDT and you can not simply add a data set using table functions...

  The solution?

  Rather than make the changes for you, I created a simple example for a regular graph to show you how to use an uninitialized shift register to store values of previous test cycles (data will be lost when the VI is closed) while the VI is in memory.

  I'll let the conversion of the DDT in the 2D-table and graphical execution XY for you to understand where it is a form any duty.

  Good luck!

  -Bob