How to differentiate the outline created texts and objects of the anchor?

Similar Questions

• How to send contact information via text and create a contact as a google contacts

  Does not work how do either, if I create a contact on the phone, it will not synchronize with google, real headache.

  Sorry you won't find 2.1 on your phone on the Dext. I think you could get a better result from other owners of Dext at Dext forum.

  It seems that your contacts are saved and synchronize different for the Cliq.

  Wish I could be more useful.

• How to connect the anchor from different forms

  I want to connect an anchor's existing (1) form A to an existing anchor (2) of the B form.

  However, whenever I select the anchor point 1 with the pen tool only that the anchor point is visible, how can I do the other visible anchor points so that I can connect them?

  See the screenshot, I added.

  Kind regards

  Victor

  

  Select the two anchors by circling them with the tool lasso (only these points), then Ctrl + J

  You can also try and simply select both objects, usually works as well.

  For better htiing one point, dependent on the bearings commented on the view menu.

• How to remove the anchor points of drop shadow?

  When I tried to align with another object, it always aligns in the shade.

  Please me on this on how to do to remove the point/transformation of the anchor points.

  

  In preferences, uncheck "use Preview limits".

• How to choose the same color in the text and objects?

  Hello

  I have a document with about 30000 objects include text, small filled circles and paths between the circles (see small screenshot attached).

  

  I need to separate into groups based on color in order to later completely redraw. I would like to be able to select all elements with the same color but the problem being that the railways have only line-color, the only circles fill color and text only-color of the text. I can't seem to find the correct command in "identical". Any ideas of how I could do?

  Thank you very much!

  PER DAY

  more precisely what you're asking is done in the following way:
  Since you have only 3 types of select:
  First set up your magic wand by double-clicking on it in the tools Panel and configure it to contours and funds, also you can bump the tolerance up to about 75. now select your text object , and then use select even--> fill color, this should get your filled objects also, then with the magic wand tool, shift click the same traits in the selection of color and you should have all 3.  Now put it in the layer that you want, save the selection, there are other more obscure options.

  However if you just divide it into groups... try this:

  go to your layers panel and make a layer for each color

  use the same for each type.  for example, select same line color for all similar objects outline color, and then drag the color "block" in the layers panel to the appropriate layer.  Repeat for every thing.

  Finally, if you just want to change the colors on the fly, for something so huge, try edit--> edit color--> work Recolor

  Just play with it, you will see only a few colors, double click on the box, the arrow worms with color in it and (with illustrations to redefine colors in the verified corner) you will see change as you select the new color., in

  I am interested in the most direct way, if anyone knows, something which would, in one stroke, select objects containing color wherever it is.

• Why Illustrator CC 2015 removes the text and objects when I export my work to JPEG or TIFF?

  Basically I have never encountered this problem on my Macbook Pro, but I just bought a new iMac and I get this problem. In order to reduce the PDF proofs to the United States and China, I tend to the artboard export to TIFF / JPEG import back into Illustrator CC 2015 and save as PDF. But whenever I have export my work plan and an overview of JPEG or TIFF, Miss me the elements in the document. Even after the expansion of the text in vector objects based objects, they continue to disappear. Can anyone help? Thank you

  You can have white points set to overprint. Select the bullets and in attributes palette remove overprinting.

  Evidence before making a .jpg file to view > overprint preview. In fact, I leave that to all most of the time.

  Is that Zapf Chancery have not seen in a long time.

• Repositioning of the areas of text and objects is very slow...

  I've just updated for CS4, CS5 and dislikes the "live preview (don't know what else to call it)" objects and text boxes that you move with the direct Selection tool. The movement is very unstable and it is difficult to align the guides and the edges of the document. I changed my screen to typical and even tried on fast and still get the same results. I use a new i7 iMac so I can't imagine that it's a hardware problem.

  Is it possible to disable it and make function more like CS4?

  Go to edit > Preferences > Interface and screen Live drawing change it.

• How to differentiate the window system is using

  Hey,.

  How can I find out which Windows I use?

  Hello g!

  Please visit: http://windows.microsoft.com/en-us/windows/which-operating-system

  and: http://windows.microsoft.com/en-us/windows/32-bit-and-64-bit-windows

• Web sites have overlapping/overflow of text and objects

  I went through all the FAQS and forums for a good bit and can't seem to find something that works for me.

  I have a problem with most of the Web sites with text in all directions, under the images, or hidden behind other objects. I saw column problems in loading pages.

  My text settings are default, no minimum size, and I leave fonts custom pages. I'm not zoomed in (even that reset it to be sure.)

  Screenshots: http://i9.photobucket.com/albums/a95/Rakao/pjtextoverlay.jpg
  http://I9.Photobucket.com/albums/A95/Rakao/mozillapageoverlay.jpg

  Yes, the second one is this Web site. The first is John's dad.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• I have a cycle recorded a vocal performance. I don't know how to get the anchor point to the film when the singer arrives early or sings after the cycle. Can anyone help?

  Loptic pro x. i. I cycle recorded a singer I just can't find a way to easily get small pieces of audio when the singer arrives early or sing a note sustained beyond the cycle. CAN ANYONE SHED SOME LIGHT ON THIS PLEASE?

  Just drag the right or left side of the region be expanded to include most of the voice.

  While cycling (replace) each record cycle is in fact only the region of an audio file that contains all the audio recording of the entire global cycle.    Then you cycle 2-3 bar record and do you 5 times counting from 1 to 20 in the microphone... Each region will be only 1 respective bar where the recording of the cycle started while you were, however each region refers to an audio file that contains all the numbers from 1 to 20.

  Then expanding to the right or left side of the region - will provide you with the early start or finish late audio.

  Same thing for taking records, except that you must be in edit mode to manipulate it start/end region.

• Issue of text and object bounding box

  I'm looking for all the help, blogs, etc. and can not find an answer.  Please help if you can.  The yellow bounding box is so hard to see and handle.  Could not find anything in the prefs where I can change the color to something darker.

  Thank you

  Julie

  Open the layers panel and change the color there.

  Bob

• How to copy/paste the text box anchor to its anchor text and remove all checkpoints empty?

  Hi all

  I have a document of a few pages, but a story. The right column is the area of main text and on many places, anchored text boxes are placed which appears on the left column, as shown below.

  I want the text of each text box anchor to cut of his place and sticking to its point of insertion/anchor and remove all of the empty boxes of anchored.

  I'm trying since this morning but I was able to get the anchor object reference. Any help on how to start with will be useful.

  Marie rosine

  

  OK, let's say you have a main text (not rooted) box and three text boxes that are anchored to the text it contains. One is anchored with text, the second is not anchored and the third argument is empty (I won't get into the anchor vs custom anchor line given that you mention in your message).

  Scroll us through the items on the page:

  function main(){
    var myDoc = app.activeDocument;
    var myPages = myDoc.pages.everyItem().getElements();
    for (var i = 0; i < myPages.length; i++){
    {
      var myPage = myPages[i];
      //Checks that the page is valid, and that it is not a master page. If either is true, skips to the next page.
      if (myPage.isValid == false) continue;
      if (myPage.parent instanceof MasterSpread) continue;
      var myItems = myPage.allPageItems;
      for (var j = 0; j < myItems.length; j++){
        //Current item.
        var myItem = myItems[j];
        //If myItem doesn't have a Character parent, it is not anchored.
        //The first and third text frames would fail this test.
        if (!(myItem.parent instanceof Character)) continue;
        //We only care about text frames.
        if (!(myItem instanceof TextFrame)) continue;
        //I think the only way this would happen would be if you had an image or
        //something else unexpected within the frame. I check for it so no content
        //is inadvertently lost.
        else if (myItem.texts.length > 1) continue;
        //If we're still in this iteration of the loop, all qualifications are met.
        //Flatten the text frame.
        //I don't use layers that often so, to me, flatten makes sense. You may want
        //to use a different term if there's a chance for confusion.
        flattenItem(myItem);
       }
     }
  }
  
  function flattenItem(funcItem)
  {
       //Hold onto the anchor character.
      var myParent = funcItem.parent;
       //Duplicate the text from within the frame so that it appears right after the anchor.
       //There may be other methods, but this works for me. I try to avoid copy/paste
       //so as not to deal with any clipboard mishaps. I added a check in case of empties.
       if (funcItem.texts.length > 0){funcItem.texts[0].duplicate(LocationOptions.AFTER, myParent.insertionPoints[0]);}
       //Replace the anchor character itself with a space (or whatever) which also
       //deletes the text frame it was anchoring.
      myParent.contents = " ";
  }
  

  I guess the takeaway is perhaps you aren't looking at the main text block and then check if anything it is anchored. You are watching each text block and find out if it is anchored. That's my approach, anyway.

• How to get the PS5 to smart an external tiff image update

  I want to originally create text and add effects to it.  But as I add effects or, especially, scaling it, I find that I have to go back and change the image of the text (lines more wide characters, change the proportions... etc.

  So I imported my text in the form of intelligent image and began working on it - but when I went and edit original, the changes were not reflected - I closed the document that I was

  work on and re-opened, it, just to be sure - maybe, it has not detected the file had been changed.  No difference.

  It seems he makes a copy separate from my original and uses this and the only way to update, is to remove an old imported smart layer and add a new and reapply all the layer effects to the new layer (or transfer of the former more later before deleting).

  Seems a bit awkward... Should not the smart picture let me understand something

  externally, and as it is imported, it is important a bitmap of the current content of size for the 'frame' appropriate for the imported layer?

  Just another question - can not just copy the layer effects - have to reapply a cropping or resizing made you in the smart image (assuming that the layer can take a zoom level and a mask - maybe he can't do it anymore?)... Since you can warp, so I assume that (remember reading in aid of layer effects applied to smart objects have been disabled while you distorted layers, or something like that...)...

  Is this possible?  Or how one does include dynamic content in an image when editing (NOT at the time of the DISPLAY - this is not HTML!  ;-)) .....

  Thank you

  -linda

  
  

  Change the original file you placed will have no effect on the smart object - content is embeded, not linked to an external file.

  Double-click on the smart object layer to open the document of the child for the edition.

• How to change the font size

  I must have hit the wrong button. When I booted my computer text and objects were suddenly tiny. I can't change the screen resolution, because it is already at the maximum: 1920 x 1080 pixels. I am unable to change the DPI setting.

  In Internet explorer, you can use these shortcuts.  Other browsers are similar.

  Zoom + (more) CTRL in
  CTRL + (Zoom out less)
  Scrolling CTRL + mouse wheel

  To change the size of the font used in the composition of e-mail Hotmail (using browser)

  1. sign in to Hotmail and go to your Inbox.
  2. click on Options then on more options.
  3. under writing e-mail click on signature and Message fonts.
  4. Select the font size, type of police and formatting you want at the top of the police of Message box (you can see how it will look on the sentence under).
  5. click on save.

• How to use the POwn, PCon or PMin in codification

  Dear all experts,
  
  Do you know how to differentiate the consolidation of one account with another? The condition is:
  Assets: PCon
  Liabilities: PCon
  Account (NCI, the working capital reserve, etc.): POwn
  Is this possible? Actually when and how to use the POwn, PCon and PMin?
  
  Thank you for your attention