Satellite Pro P300D-21F - how I wake up from hibernation?

Similar Questions

• Satellite Pro L850-1UJ: how to create DVDs from recovery partition recovery

  I recently bought a Satellite Pro L850-1UJ with Windows 8
  http://www.Toshiba.co.UK/laptops/Satellite-Pro/l850/Satellite-Pro-l850-1UJ/

  I created a new partition (if I could use it as a data room)
  i.e. C: windows system z AND my data

  After that, I couldn't use the RECOVERY MEDIA CREATOR to create recovery DVDs
  BUT the score still exists and I can see the inside of the windows files

  It IS a way to extract the files from the recovery partition or any other idea how I could fix the partition scheme so the RECOVERY MEDIA CREATOR he might recognize

  Thank you very much for your time...

  After changing the structure of the partitions on the HARD drive, sometimes that recovery media creator Toshiba cannot find the files for recovery. These files are marked with special markers which, in your case, will be more found.

  I m afraid is now too late to make or change anything. You're not the one with this problem. We always write here that the first step should be the creation of recovery media and later you can do what you want. You can even remove.

  Now, you can just order new recovery disc to https://backupmedia.toshiba.eu/landing.aspx

• Satellite Pro L20: Showing empty after waking up from hibernation

  I've had my laptop Satellite Pro L20 a year now and it has been slowing recently, especially when starting after being in hibernation mode.

  It is even now not return back. I had placed it in hibernation, and then when I tried to turn it on again, it hummed as if it was put into service, but the screen remains blank.

  I don't think that he is in communication with the rest of the laptop. I tried to restart it several times but I still can't out of his inactive hibernation mode and the monitor simply unresponsive.

  Any help would be appreciated kindly!

  Hello

  > I've had my laptop Satellite Pro L20 a year now and it has been slowing recently,.
  Maybe you should clean the HARD drive and also use defragmentation application to optimize the data saved on the HARD drive.

  Back to your problem: I don't know if this will help, but you can try to do the BIOS update or install the latest driver from Toshiba support page display.

• Satellite A10 is necessary for well wake up from hibernation

  My Satellite A10 takes about nine minutes to Hibernate when the lid is closed, but the computer start faster when you press the Start button. Energy saving mode has been implemented correctly for the hibernation.

  Hello Terry,

  The hibernation feature works by copying the current contents of the RAM to the hard disk so that when the laptop is powered on the contents of the RAM can be restored and CANM unit and continue to operate as it did before being closed. This is different from the day before where the contents of the RAM is held in RAM and is maintained by battery or AC power.

  The Hibernate feature takes longer to call because of the time taken to write the contents of the RAM to the hard drive. The actual time required will depend on the amount of RAM you have installed, and also what processes and applications you run when you call Hibernate.

  If the actual time is too long then this could indicate that your hard drive may have some attention (cleanup and defragmentation) or the drive itself has problems (bad sectors), causing it to start over read/write operations as it attempts to Hibernate. I suggest that you try to clean the disc and then running CHKDSK to check if the drive is physically OK.

  Kind regards

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.

• Satellite Pro A100 spontaneous wake up from hibernation or standby

  Hello world

  Since a few days my Satellite Pro A100 automatically wake up from hibernation mode
  (and last night mode ensures too)

  I don't have any in features (such as LAN or USB) wake up, as far as I know, that these features are not yet present in my current BIOS version (1.50).

  The wake-up generally occurs with peripheral No. or LAN cables connected.

  I used the hibernation mode without any problems for over two years on this laptop.
  So I think that it is a hardware problem, for example something related to the power button or the close button of cover.

  Is it possible to completely disable the close lid button? PowerSaver to disable for example l ' hibernation on the cover, but I don't seem to be able to turn OFF the alarm on the LID.

  Thanks in advance for any suggestions or comments

  seeah

  Hello!

  Well, in your case, I would try first to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If it doesn t work, please contact an authorized service provider. Technicians you can check laptop because then it looks like a LID switch problem.

  Good bye

• Equium A110: Cannot use LAN after wake up from hibernation or standby

  Hi guys

  I can't use lan on my tosiba equium A110 after he wakes up from hibernation or standby. Lan icon there is bur that the internet will not work. Please help me.

  Another problem. When I try to cut something I can't paste it if I open a new folder. I need to keep the file open back cut once again and then paste it. I mean that if after the cut, I open any folder it won't paste it.

  Please help me.

  Thank you

  Hello

  Have you tried to update the connection? Something similar happens on my laptop, but not with LAN but with WLan. If you right click on the little icon of lan, you will see the option to repair. Check it out.

  Also found this possibility. I put t know if it will help but try it.
  1. go to [start]-> [Control Panel]-> select [System]
  2. the system properties dialogue box select [Hardware] tab-> click [Device Manager]
  3. in the Device Manager dialog box, select [network adapters]-> double-click [Intel (r) PRO/100 VE Network Connection]
  4. go in the [Advanced] tab-> property [Wake on settings] select-> Select [Wake on Magic & realized]
  5. Press [OK] to close the dialog box.

• M70-160: don't wake up from hibernation or standby - hardware or software?

  I just maaaaaan!

  works fine, but will not wake up from hibernation or 5000mAh! unless you're going to wait a while! 15 min or something like that!
  After that he's going to wake up and work normally.

  I thought that it is overheating problem but now just turn it on and when the toshiba logo appear if you turn it off, it works again, but after 15 min it will BE!
  This isn't a problem of heating!

  She does this even without HD top!
  at first, it was the hibernation and standby problem, now it dose the same with stop!

  what I can do!

  I bought just the guys! ASP is now a way!
  is there anyway that I can do to fix this!
  I have difficulty PCs a lot, but not books!

  Hello

  You can also contact your local Distributor and check with him. They also have enough experience. On this path, it is not easy to tell exactly what is happening.

  Is the unit preloaded with recovery media or with your own operating system?

• Satellite Pro A120-154 - how to remove the HARD drive password?

  Hello

  I have the following problem: I set a password for the HARD drive in my old Satellite Pro A120-154 years ago, and now I want to remove or change the passowrd since I'll give you this laptop for my nephew. Instead I don't know the password, I am not able to change or remove, not with the password of Toshiba uitility program and not with the BIOS set up.

  Further I can't find any info on this in the user manual. How can I do this?

  Thanks Tino

  Hello

  I found several useful documents from Toshiba on HARD drive password. Please take some time and pick up some info on HARD drive password and how it works.

  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ9401AR0000R01.htm

• Satellite Pro S500-14Z - how to access the BIOS?

  Hello

  on the Satellite Pro S500-14Z I can´t access the BIOS via F2 and can´t change the bootpriority through F12. By pressing F2 or F12 during startup, the S500 beeps and restarts. When you first start, I had access to the Bios and set the password and active supervisor module TPM. Since I have no access to the BIOS before Windows starts. Is there another key to access bios (I tried ESC, DEL, F1, INS) or how can I change the pw supervisor (I know my real password!) and disable the TPM?

  Thank you
  Karl

  Hi karlS_1,

  Normally you can access the BIOS if you press F2 before Windows starts. It works with an external keyboard?

  You can change some settings in the BIOS using Toshiba HWsetup. This tool is preinstalled on your laptop and you can change the order of boot with this tool.

• Satellite Pro S500-10F: how to disable the fingerprint reader

  We just purchased a portable Satellite Pro S500-10 which has the fingerprint reader. Does anyone know how we can disable this facility of the laptop, we do not remove program only disable the installation.

  Thank you

  You can disable it in Device Manager. If it's not ideal, I guess you could send the laptop to an ASP to have the fingerprint reader physically disconnected.

• Satellite Pro A300-28R - how to enable virtualization in the BIOS?

  I tried to enable the setting of virtualization in the BIOS and the setting is disabled and I was unable to change the setting to activate. I have flashed the BIOS to the new version, and now how to enable virtualization has completely disappeared.
  The laptop model is Satellite Pro A300-28R with Windows 7 Professional and BIOS version 2.10.

  How do I enable virtualization setting so I can run Windows Virtual PC mode to run compatible programs XP?

  Hello

  Did you check the specifications of your laptop first?

  The fact is that the processor must support this virtualization and according to the Web of Toshiba site, your laptop is equipped with processor Core 2 Duo T5870.
  I checked this on the page of Intel CPU and virtualization isn't supported. That means t, you can use this feature!

  Here you can see this:
  http://Ark.Intel.com/product.aspx?ID=37034

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• Satellite Pro P100-438: how to disable the CapsLock NumLock or Scroll sounds

  Hi out there,.

  How can I disable these "ugly" notification sounds when I press CapsLock NumLock or Scroll?

  It's a Satellite Pro P100-438. Does anyone have any suggestions?

  Thank you

  It's pretty easy mate.

  Follow these steps:

  -Keep right SHIFT> key for about 10 seconds.
  A messagebox will appear (FilterKeys settings) and offer a menu:
  -Click the [settings] button and a new window will appear.
  - Remove the tag [x] of [Use ToggleKeys].
  -Click [OK] to save your changes
  You're done :)

• Satellite Pro P100 PSPAHE: How can I replace the HARD drive

  I have not found any documentation about the replacement of the engine on my Satellite Pro 100 PSPAHE.
  How can I physically remove the disk?
  And my Device Manager indicates that the drive is a Fujtsu MHV2200BT PL ATA. What, PL, sounds like parallel - I thought it was a SATA drive.

  Hello

  This laptop was equipped certainly SATA HDD :)
  If you want to upgrade to a larger HARD drive and a SATA HDD is right!

  The slot in the HARD drive seems to be placed at the bottom of the unit near the edge of the laptop.
  To remove the disc HARD turn the computer upside down.
  Loosen the 2 screws and remove the cover of the HARD drive during the liberation of the locks.
  Remove the HARD drive cable connector HARD drive. Be sure to not reach
  damage to the connector. Place the mounting of the HARD drive on a flat surface and remove the 4 screws.
  Then drive HARD is free one may be replaced by a new one.