LaserJet 2300: Laserjet 2300 horizontal streaks

Similar Questions

• HP Photosmart 5520: Horizontal streaks

  I have only bad horizontal streaks in black ink.  I only use genuine HP cartridges, and even if they were not empty, I changed the.  I have cleaned the heads of cartridge but still horrible streaks in black ink only.  Help!

  Hello

  Plaese, try the procedure described in the doc of fixing printing quality for your printer.

• Shows HP LaserJet 3330 horizontal lines exactly each 1.5 "when you print a completely blank page

  HP LaserJet 3330 shows seven or eight approximately 3.5 "cloudy horizontal lines spaced exactly each 1.5" even when you print a completely white page. This also happens when copy and fax.

  There are also 2 very thin vertical lines running down the entire page about in the middle. They are exactly 1 "apart.

  However, a scan of a blank page on my computer (not printed) is perfectly clean.

  Windows 7. No change or upgrade.

  Propbably the toner cartridge, if they are 1.48 "apart that it could be the cylinder in the process of development or the charge roll who are both in the toner cartridge. So a good assumption if you replace the toner cartridge, the problem will disappear. Vertical lines could also be part of this issue.

• HP Laserjet P1006: print streaks on a b/w laserjet printer

  I got this free Laserjet P1006 and it has vertical lines on the page. See attachment. How can I clean printing?

  

  The test at Midway:

  http://www.printertechs.com/printer-troubleshooting/halfway-test

  Swap the toner cartridge, the merger or the drum as a result.  A verticle like this issue is usually the result of a however bad toner cartridge.

• HP laserjet m277dw: horizontal lines on HP laserjet m277dw

  I have a m277dw HP printer color laser, purchased two weeks ago. After about 10 pages, he began to print horizontal lines 22 and 23 mm. They are better visible on a single color background. Are still visible on the page of demonstration with ball.

  Support couldn't see them on scan I sent by email, but they say it is possible that these lines are ok for this printer (?).

  They are terrible and extremely disappointing, can you confirm that this is a normal operation of the printer?

  I used normal paper and the default settings for printing from my pc. I also sometimes spill toner on a page in different places, sometimes even on the back of the page.

  I tried to clean the drum of imaging with a soft cloth, it helps with spills and also makes lines less visible, but only for a few printed pages next. I also tried to make the calibration and cleaning page, but without success.

  https://www.dropbox.com/s/u4n3y7k67pic6yt/IMG_1426.jpg?DL=0

  https://www.dropbox.com/s/afl549df6cmu23y/IMG_1427.jpg?DL=0

  I see the lines and they are not normal for any laser printer which makes HP.
  
  I suggest trying some different solid color pages that mix the colors as a green page and perhaps a red page.
  
  You can also see the problem in print quality pages that have been mentioned by the previous poster.
  
  You just need to get something where support can see you have a problem and then be insistent that they fix it.
  
  But let's be practical here, you bought less than two weeks, return it and get another, it's probably only a defective cartridge but you should not have to fight the HP support for service.
  
  And I want to return and get a refund then buy the replacement. You want a receipt to go with your new printer clean, clean as in with a good date and anything else on this topic.
  
  If my post is solved your problem and click the accepted as button solution under him.
  
  In order to thank a Tech for a post click the thumbs up button under the post.
  
  You can even click on the two keys...

• LaserJet 5200 leaving Streak

  I'm new to this interview printer thing everything and our LJ5200 recently began to leave a trail. I tried to replace the toners, but this didn't solve the problem. I got to be clarified by printing ~ 25 copies blank to make the streak to disappear, but then once I have add any toner to the page the streak comes back to us. I tried to do the cleaning page thing and that had no effect at all. I wonder if its possible fuser goes wrong without giving me a message. Any ideas would be great. I'll be back in the office in the morning to add images of the pages with the streak. I spent about an hour by changing things I thought that he can solve (with the help of google), but nothing has worked until now, so I just went back to the default settings. I need to get this cleared up as soon as possible. Thank you! Sorry if there was something similar posted I did some quick research and could not find anything.

  Have you removed the fuser and inspected the roll? You would probably be able to see an article on the roll.

  You can also do a test. Print a page and stop him before entering the future and see if the line is present or not.

• 6510 printer all-in-one: horizontal streaks on 6510 all-in-one

  I have horizontal stripes when printing. Lived all the Hp steps recommended to solve the problem and it still exists. Other than to go to a service center is there still something I can do to solve the problem? Would it not be cheaper to buy a new printer?

  Thank you

  Psylintg

  Hi @psylintg, thank you very much for the reply.

  Appreciate your efforts to resolve the issue.

  It looks like a hardware failure with the printer. I suggest you to contact HP technical support to get a few good options to upgrade on your current printer.

  You can visit http://www.support.hp.com/contact-hp and fill in the details of your product to get the tech support number.

  If you have trouble, let me know and I'll do my best to help.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• My Laserjet 2300 allow XP and Windows 8 - 2 computers connected to it?

  Assuming that I can download a driver from Windows 8 for my Laserjet 2300, I always will be able to print from my old XP computer, also hanging on to her?

  Yes. The driver will not be installed on the printer, it will install on the PC. This means that as long as each PC (Win 8 and XP) has its respective drivers, they both should print without problem. And it looks like there are Win 8 drivers for your printer. You can get by following the link below. Make sure to enter the full name of the printer to get the correct drivers, that there are a several versions of the LJ 2300.

  http://goo.GL/BVOOg

• HP Laserjet 2300: HP 2300 printer won't print after basic troubleshooting

  My HP Laserjet 2300 print order and does not meet the print commands. I use an iMac running OS 10.7.5

  Action taken:

  1. the cables.

  2 printer can print pages of the printer itself.

  3. check the software updates.

  4. set the printing systems 4 X

  5. repair disk Ran twice.

  The printer is still on which the print command.

  I think that the usb port on the printer has gone wrong.  You can try adding a jetdirect eio card and attach the printer via ethernet to your router or switch if you have one.  Cards can be purchased on ebay for about 10:00.  Look for the HP 600N, 610N or 615N.

• HP Laserjet 2300: HP Laserjet 2300 does not not with El Capitan

  Since the update of OSX El Capitan, my laserjet 2300 does not work properly. I have no problem with my Brother printer, though. It must be something in the driver software. How can I slve; where can I find the updated driver software?

  The recent update of the El Capitan 10.11.4 seems to fix the problem. HP Laserjet 2300 works as before! It's a shame, it took this long and caused a load of annoyance with many people!

• Cannot install the printer HP LaserJet 2300 on Windows 7

  original title: I have a question

  Morning

  I tried to configure my computer to 32-bit windows 7 on Hp LaserJet 2300 printer, but it does not work. Please help me

  Did you get the drivers from here?

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=238802&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=238800

  Otherwise, you have to...

• HP laserjet 2300

  Hello

  I have 2 computers and a printer HP laserjet 2300, one with win7 32 bits and the other with win7 64bits. Can you provide me with a link to the drivers/software for computers: 32 and 64 bit?

  Thank you

  Joel

  I'll be happy to help you with this problem.

  Here is a link that can help with this.

  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&task=&tool=&query=HP+LaserJet+2300

  I hope this helps.

• How to install HP LaserJet 2300?

  Original title: hp 2300 laser jet

  How c alter hp laser jet 2300 to collect?

  How c alter hp laser jet 2300 to collect?

  Hello

  Your best resource is HP.

  HP drivers & support | United States:
  http://WWW8.HP.com/us/en/support-drivers.html

  You can also check on the Forums of HP Support for other users who may have solved that problem.

  HP - HP Support Forum Support Forum:
  http://h30434.www3.HP.com/PSG/

  Concerning

• HP laserjet 2300 dtn

  need help replacing roll in the third set. Is anyway to get a diagram

  Hello wsbowles1,

  You need to replace the roller for the third set.

  Here is a link to your service manual that will help you.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• LaserJet 2300: Printer error status

  Printer is displayed in the error state. Reinstalled the drivers, powercycled the printer and rebooted the computer several times. Question began with the last update of Windows 10.

  How is the printer connected?  If this is a known issue with the last update 10 windows parallel port.  Go to Device Manager and in the tab change the Port settings to "never use an interrupt" to one of the other options.