How to disable the eps, save the file as < Filename > backup - 01.eps?

Similar Questions

• How to disable the file hiding (changing options for hard disk does not work)

  Hi all

  I hope someone can help me with the following problem:

  -J' need to open a file of 16 GB of content in third party software (Stata) who reads completely in memory.

  -Due to Windows caching file, necessary to get the procedure done about 32 GB cache files and Stata access physical memory.

  -As I have only 24 GB of physical RAM file is read later part of virtual memory, which leads to serious performance problems.

  I unchecked the box 'Enable write on the device cache' to my hard drive. That did not help. Is there a way to disable the Cache during PLAYBACK of files?

  Thank you very much in advance for any help!

  Tobi

  The write cache and virtual memory are different. Virtual memory is an extension of the physical memory residing on the HARD disk where Windows is installed. Normally, the virtual memory is about twice the size of the current physical memory. Write cache is an exclusive setting for external hard drives only and has no effect in internal hard drives.

  In your case, please note that full 24GO of RAM will not be allocated to the program. At least 1 GB will be reserved for windows, so the rest of the programs are moved to virtual memory, which means that the HARD drive. It is not recommended to disable virtual memory because it can cause stability problems. In addition, the files are not copied directly in memory, even if they are big. Instead, the parts of the file are available and this area, including the incremental values and material, are stored in the memory. So if all of a sudden, you access an area of the file which is very far away from the previous location, it takes time as the new area, as well as differentials and material value of a few bytes is also copied to the memory. The box of files previously displayed is erased from the memory.

  For performance improvements, you can go for the SSD, RAM with higher clock speed (must be compatible with the motherboard) as processor as well as the upgrade. However, please note that the process of accessing a file even as mentioned previously, but the speed will increase because of the higher bandwidth and the clock frequency.

• How to disable the file host Guest service (hgfs.sys) system?

  to disable hgfs, depending on error failure CPP while creating trust relationships between Windows 2003/2008 servers or domain controllers on the Web Vmware site, to change the registry, but could not find hgfs on regietry as it intrudued on my Win 2003 SP2.

  So, how can do?

  Thank you.

  http://communities.VMware.com/message/519830

• In fact, I'm looking for how to disable the discovery network for all profiles (Public, private, domain).

  * Original title: GPO registry key or change

  Hello

  In fact, I'm looking how to disable the network for all profiles (Public, private, domain) discovery and how to disable the file/printer sharing just to the private profile and public with a GPO or a script.

  I ' found some GPO as disable inbound/outbound rules for sharing files/printers and discovery of the network, but I think that a better and more easy solution exists.

  Please can you help me. :)

  Best regards.

  Hello

  According to the description, I understand that you want to disable the discovery network for profiles.

  I suggest refer you to the Microsoft Help Article below and check if that helps.

  https://blogs.technet.Microsoft.com/Networking/2010/12/06/disabling-network-discoverynetwork-resources/

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files to help!

  I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files, help please!

  Hi Shawnmehringer,

  Thanks for posting in the Microsoft Community.

  It would be useful that you can answer these questions to help you further.

  1. have you installed Microsoft Fixit Center on your system?

  2 are. what codec fix you referring?

  3. which files are disabled and you try to activate again?

  If the problem is related to Microsoft Fixit center, you can ask your question on the Forums of Microsoft Fixit to get help.

  Microsoft Fix it Center Forums

  If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.

• How to disable the screen saver

  Hello world

  Does anyone know how to disable the screensaver for Winodws 7 via Group Policy or regisity.

  Thank you

  Ivan

  Hello

  Thanks for your posting in Microsoft Community

  Open the Start Menu and type gpedit.msc into the search box and press ENTER.
  When the local Group Policy Editor opens, navigate to User Configuration-Administrative Templates-Control Panel-personalization. Then in the right column, double-click on prevent the background screen change.
  Now, check the radio button next to Enabled, and then click OK.
  Back on the screen of group policy, double-click on prevent changing the screen saver.
  In the next screen select the next radio button to activate it, click OK, and then close the Group Policy Editor.
  If you click on to change the screen saver, an error message appears to let them know that the function is disabled.

• How to disable the cc button animate html5 canvas files?

  Hello!

  How to disable the cc button animate html5 canvas files?

  ex:

  this.mc.on('click',function(){alert('this')})
  this.mc.enabled=false
  

  question 1:

  When you click on the 'mc', it always run. How can I control the button of the deactivate and activate?

  question 2:

  The mc is not an image, it's a movieclip. How can I change the colors of the mc? example: default of the mc color red, I want to click change black!

  Thank you!

  use addEventListener instead of 'on '.  You can then use removeEventListener to disable.

  or you can intemperies to use 'on' using the mouseEnabled property to disable this.mc:

  this.mc.mouseEnabled = false;

• How to disable the feature "send the file as an attachment?

  11.0.13 worm

  How to disable the feature "send the file as an attachment?

  /************************* Hide Menu ********************************/

  Hide the default file > Send file... menu

  app.hideMenuItem ("Email");

• How to disable the trace files in the oracle 11g version

  Senario: trace file grow
  How to disable the trace files in the oracle 11g version
  pls guide with best practices

  NATHALIE wrote:
  Senario: trace file grow
  How to disable the trace files in the oracle 11g version
  pls guide with best practices

  11 g, there is an extended tracing which happens for reasons best known only to Oracle. But if you want to disable, Coskan had published a small ticket mentioning a parameter not documented (which means you should think twice before using it) to disable it - disablehealth_check *. Here you can read the full message,
  http://Coskan.WordPress.com/2009/06/03/too-many-trace_file-on-11g/

  Aman...

• How to disable the setting button in Tools - Options - advanced - network of windows registry?

  Dear support,
  Now, my office has use Firefox as default browser to access the Web server. And there is a policy that users must use ProxyServer. I don't want to change user setting in Firefox proxy. How to disable the setting button in Tools - Options - advanced - network of windows registry?
  Thank you.
  Treky

  You cannot use the Windows registry to disable the elements in Firefox. This link shows how to lock the proxy settings of Firefox, change the values as needed:
  http://www.stbernard.com/ip5kb/iPrism/whatsnew/50SupportFiles/SupportFiles/IP0460.htm

  A change of minor importance, in step 4, instead of add this line to all-js, you can create a file called local - settings.js containing the indicated line and save the file in the same folder as all.js

• How to disable the backup works when you print an email?

  How to disable the backup works when you print an email.  Whenever I try to print an e-mail, save it as a PDF is displayed.  I then have to save, then open the file to print.

  Hello

  Thanks for posting your query on the Microsoft Community.

  To disable this feature, you need to uninstall Adobe reader and then check if still back you the question quickly.

  Kind regards

  Jesinta Rozario

• How to disable the App tabs (tablets should) start automatically?

  How to disable the App tabs (tablets should) start automatically?

  because the option [don't load the tabs up to choosing] dose does not work with her, and she keeps starts every time when I restart Firefox.

  Please help me!

  Don't bother, I arrived at the solution of my car, you can do the following:

  Type "subject: config" [without quotes!] in the location Bar (address bar) and press ENTER to display the list of preferences, as shown in the photo #1 in Firefox 17 under Windows 7.

  If you see a page with the warning as pictured #2, this might void your warranty!, click the "I'll be careful, I promise!" button to continue (in fact, there is no guarantee that it is, it's more a joke to ensure that users are aware of what they are about to do). Uncheck the box to avoid the warning in the future.

  Now to the search bar in the image #3 type: tab and search for it

  preference name:
  

  Browser.sessionstore.restore_pinned_tabs_on_demand

  or you can copy directly to the search bar.
  Then, follow the instructions in the photo n ° 3 .

  Just in case where if the photo appears, follow these steps:

  First: Right-click on the name of the preference that we sought.
  Then, click Toggle to change the value from false to true.
  Or, double-click it and it will change.
  Finally, restart Firefox, and you'll notice that they don't automatically load until you click on it.

  That's it, good luck to all. ;-)

  Note: the list of fonts preferences fat is the user changed, and the United Nations-fat is the default setting.

  Warning: change preferences can, in rare circumstances, break Firefox, Thunderbird or Mozilla Suite, or cause strange behavior. Only do if you know what you're doing or trustworthy tips.

  Additional INFORMATION:

  Subject: config is a feature of Mozilla applications which lists application settings (known as preferences) that are read from the profile files prefs.js and user.js and the default application. A lot of these preferences are not present in the preferences or Options dialog box. Using about: config is one of the many methods of changing the preferences and adding the other 'hidden '.

• 5102na HP OMEN: how to disable the audio correction Bang & Olufsen horrible?

  Is there someone who could tell me please how to disable the audio correction Bang & Olufsen? I'm sure that some people like it but I work with audio and I can't really how it changes the sound. I tried to open the Bang & Olufsen sign but I cannot unselect the correction in the section "listening experience", nor that I can change the associated equalization. Please someone help, thanks!

  I found a solution: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Beats-Audio-compression-and-volume-fluctuation-HP-ENVY-m6/m-p/5137867/highlight/true#M67144

  1. Go to the Windows Device Manager > sound, video and game controllers section.
  2. In the list of the audio device drivers, look for Realtek High Definition Audio. This is the device driver for BeatsAudio (a bit sneaky, wouldn't you say?).
  3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
  4. Right click and select Update driver software.
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of drivers for devices on my computer.
  7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
  8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
  9. In the Update driver warning window, click Yes. You should see a confirmation with the high definition Audio Device display window. Click on Close.
  10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
  11. When prompted to restart, click Yes.
  12. Now enjoy your music with no compression!

  Thanks to SteveCT99

  This does not disable audio-Bang & Olufsen, but I just installed this EQ across the system instead: http://sourceforge.net/projects/equalizerapo/

  HP needs to release a driver which allow us access to the "Improvements" tab so we can turn off "Loudness equalization" (although "Loudness equalization" should not be on by default in the first place).

  The current driver is default.

• HP Probook 650 G1: How to disable the keys way to Probook 650 G1 running Windows 7, 64-bit

  I just bought a HP Probook G1, intel i7 650 - 4600 m, system BIOS 01.34-08/28/2015, keyboard review KBC 16.3 C version.

  ESC and F1 through F12 function keys seem to be in the Mode of action key (for example flight gives HP, F6 system information allows you to change the audio levels, etc.)- and I prefer to keep the standard functions of these keys (for shortcuts in Word and Excel, also for Express Scribe transcription software).

  I found Ctrl + Fn + the function key corresponding is workaround to achieve some (but not all) the standard functions - but which is cumbersome when used frequently. Workaround doesn't seem to work for the ESC key.

  I saw a few tips on how to disable the Mode keys on some laptops HP - eg
  http://support.HP.com/au-en/document/c02035108

  - and I have used this method on the previous laptop HP (e.g. Pavilion G6), but it does not work for this Probook. The configuration screen of the BIOS on my new machine does not seem to show the key Action Mode (or same System Configuration) as an option.

  I would be grateful for suggestions.

  Problem is now resolved, thanks to HP Technical Support phone line. Their tips were:

  * go to the BIOS Setup in the usual way (shut down, then power on, press ESC, choose F10 for Bios configuration)

  * Choose the Information System

  * arrow above to advance

  * Choose the Configuration of the device

  * Uncheck the Fn key switch

  * Save, etc.

  The corresponding option is more referred to Action Mode button for this model of HP laptop, at least not for the version of BIOS this Probook 650 G1 (worm 1.36, 25/04/2016).

• How to disable the BIOS password

  Hi Please help me, my hp Pavilion dv6-2112sa always ask me password of Directors whenever I have on my computer.i password but do not know how to disable the it.pls help

  Hello

  You can remove the need for a power on password as follows.

  Shut down the laptop.  Now on TAP the ESC key as soon as you press the power button to access the start menu, then select f10 to open the Bios menu.  Use the arrows to select the Security tab and press ENTER.  Use the arrow keys again to highlight the power on password and press ENTER.  Enter the current password and then for the new password, just leave this blank and press on enter – do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  Kind regards

  DP - K