How to do the 360 iPhone video 6

Similar Questions

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• How to set the use of video memory on the graphics card to my laptop cq56-110us?

  Hello

  I have a PC Compaq laptop CQ56-110us.  Windows 7 says is has 797 MB video memory shared from the main memory of 2 GB.  I want to reduce the use of video memory, i.e. 256MB.  Is this possible?  If yes how.  I would appreciate help with this.

  Thank you

  Don

  Don, welcome to the forum.

  Built-in memory is allocated by the system.  As more video memory is required, is allocated.  There is no way that you can change.

  If your problem is solved, please click "accept as a Solution.

• How to export the same original video, only cut short?

  Hallo,

  I have a lot of Canon EOS 5DM 3, fasteners, QuickTime Movie format. Many are about 2 minutes, and I want only to reduce their time to 1 minute or less and take her. And then simply have exactly the same clip, single cut shorter and without noise. I don't want to compress the new clip or something like that when the export of the BODY again. But I can't find the option to export in agency or Media Encoder how to proceed? Is this possible with a Cloud applications creative as PP, AE, Media Encoder or more?

  Thanks in advance,

  SebastiaanFP.

  You are looking for the Holy Grail. I get it. Slice and rename. Not going not to happen.

  The first question is that unless you are shooting all the I-Frame, which is an option on your camera, I think, then the compression method does not lend itself to cutting without recompression on output. So pull on all I-Frame.

  You can not do exactly what you want to do with any of the Adobe products I can say, but exports I receive personally export to a very high quality in Premiere Pro are virtually identical to the original.

  I suggest that you run the tests of same I fell when I got my camera. Take a small piece of the action. Some people here will remember that I shot footage of myself three juggling beanbags. I did that in order to get a few perfectly still sequences on both sides of me and then have the ability to zoom in on the poufs to see how fast movement watched.

  Shoot a short clip, then import, cut a little off each end and export. Compare the two in full screen, zoom to 200%, on an HDTV, you name it. Anyway, you can. If you can actually see a difference, you probably not using the right settings. Import export in Premiere Pro and try to put them on the same sequence and reframe the headrail so that you see the left one and the right on the other side.

  For example, I use these parameters with my images to 72 MB/s using 29.97. I also shot 24 fps for a test, but for this example I used the 29.97 video. I exported using CBR because I wanted the smallest change that I could accomplish and VBR certainly makes significant changes. Because I don't like the size of the file, using CBR works for me.

  

• How to remove the object in video

  I recorded a concert of kid, but some parents walked in my path for 3 seconds, how do I remove these topic unwanted on my video of EPA 12?

  Angus-Y

  What version of Premiere Elements you are using and on what computer operating system is running?

  How much of the frame of these consumes upward? It is small enough so that you can insert a picture indeed image to replace with this type of coverage?

  Can cut you just 3 seconds of video?

  I think that the expression of today for this kind of thing is photobombing, I suppose that videobombing in this case. Depending on the location of the people, you could do a depth of field type of thing with matte where they are on your person of interest fading is in full discussion.

  The details of the circumstance will lead plans to save the 3 seconds of video.

  RTA

• Camileo S10 - how to avoid the 'information' during video playback on TV

  I just received my Camileo S10... very nice indeed... but how to avoid the track and reading data to be shown on the screen during playback on my TV...?

  Go to the movies, then before you start playing click the OK button. This also works when you save. You must do this before playing or recording.

• How to access the forums / double video clip?

  Hi, I'm new and I always confuse on how to duplicate the movieclip in as3 then access instances. I try to write this code:

  for (var i = 1; i < 5; i ++)

  {

  var mc:MC = new MC();

  MC. Name = String ("mc_" + i);

  addChild (mc);

  MC.x = 20 * i;

  MC.y = 0;

  trace (mc.name);

  }

  When I run the code, I see that I have mc_1, mc_2, mc_3, and mc_4 and I see them in the scene.

  But why I can not manually access by calling their name and put measures in it? for example like this:

  for (var i = 1; i < 5; i ++)

  {

  var mc:MC = new MC();

  MC. Name = String ("mc_" + i);

  addChild (mc);

  MC.x = 20 * i;

  MC.y = 0;

  trace (mc.name);

  }

  mc_1.x-= 3;

  removeChild (mc_2);

  mc_3.y += 3;

  mc_4.x += 2;

  If I run the present, I got "1120: access of undefined property mc_1, 2, 3, 4" error message.

  I want to just call / each case individually outside of the loop / access code. Is this possible?

  Can someone help, please? Thank you

  a reference and are not the same (unless you create an object in the ide).

  use getChildByName() to reference objects with the same reference (mc) and different names:

  this.getChildByName("mc_2").x-= 3;

  etc.

• How to download the best quality videos in dreamweaver

  Hello

  I'm trying to figure out what format and size I should convert my video 1080 x 720 to for import in DW. Owen

  1080 x 720... It is a strange aspect ratio... Well.

  For the best coded compression, use H.264 to create an mp4 file at a rate not to exceed the speed of download Internet connection the majority of your audience. If you are not familiar with the download speed, test your here:

  www.Speedtest.NET

  To examine the bitrate:

  Video bitrate

  One of the principle of goal setting is to "begin with the end in mind". In this case, it will be very difficult to give good recommendations because the end is not defined. So I'll just make a few assumptions and you can correct me if necessary.
  First, I'll assume that you convert Flash, whether you want to broadcast this video on the Internet. If that's true, then going to make some assumptions about your potential viewers Internet connection download speeds. Let's just say that most have at least a 1.5 MB connection or faster.
  OK, that would mean that a video bitrate of half that generally provide a video download that is not interupped by the buffering (most of the time anyway). So assuming a video bitrate of 750 kbps, what would be the optimal display size?
  Before decide us, here's a little info on the bitrate. To read more high quality, the bitrate of the video is directly related to the size of the screen. In other words, more display, incoming data more are needed to correctly display the video. Think of bitrate in terms of a can of paint. If you have 1 quart of paint, you might be able to do a very nice job on an area of 32 X 24 feet. But if you try to stretch the same amount of paint on a surface area of 64 X 48 feet, the coverage is not as good and you get mediocre results.
  Similarly, a video display to 640 X 480 pixels will require 4 times the baud rate as a video displayed at 320 X 240 pixels to produce the same quality. Thus, for example, a video with a speed of 100 kbps, 160 X 120 displayed will produce the same quality results as a video with a bitrate of 1600 kb/s is displayed in 640 X 480.
  So, to sum it all, 750 Kbps, even up to 1000 kbps video rates can usually get delivered high-speed Internet on most connections. Higher rates may work for connections very fast but will cause problems for viewers with slower connections. Video display size has a direct impact on the final quality. In the range of 750 to 1000 Kbps, display size should be maintained around 450 or 500 width max (and whatever the height proportions claims). Yes it can be displayed larger, but the quality will suffer.
  Sounds like the audio settings are fine, especially for delivery on the Internet.
  Regarding the framerate, maintain the framerate video original raw for best results. Therefore, if the clip was shot at 24 frames per second, let him.
  In regards to video converters, you have the Flash 8 Video Converter? It works very well for the video to be delivered over the Internet. Don't forget, you're taking a Cadillac of video (h.264 HD) version and cram into a Chevy body so he can work on the Internet.

  Best wishes

  Adninjastrator

• How to slow the time-lapse video I took?

  Accidentally, I recorded a video using Time lapse video functionality.  How can I slow down the video to view it?

  In addition, he did not record sound when it is in Time lapse mode?

  You do not have. Time is quick, so time happens or is struck by decay more quickly. This audio is not recorded, and it would be completely incomprehensible at the expiration of the speeds.

  Time lapse ignores also usually several frames to expedite the passage of time. So even if slow, most of the data wouldn't be there to see.

• How to get the list of video playback

  Hello

  can anyone suggest me how can I get the number of playlist, the name of all the playlist available in videos and the number of items in each list of reading...

  Thank you...

  QString currentpath(QDir::currentPath());)
  currentpath = music_database_path + "/ db/mmlibrary.db";

  SqlDataAccess sqlDataAccess (music_database_path);

  SqlData QVariantList = sqlDataAccess.execute ("Select c0filename, c2artist, c3album, c4genre, c5composer, c6title, audio_search_content c7description') .value();

  using this we can get all the file name, playlist, albums, genre, etc.

• How to remove the list of videos frequently consulted in media player?

  Surf the net and read after the videos, videos are listed in windows media player.  How can I remove the registration and/or the actual videos?

  Hello

  Please follow the steps given in the following link and check if it helps.

  Remove information about what you have played in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/remove-information-about-what-you-have-played-in-Windows-Media-Player

  Let us know if it helps!

• How to create the database of video/photo thumbnails file

  I notice that there is a thumbnails db file in some of my folders containing video/photos while others do not.  Those who seem to have miniature views of video/photo pop up much faster than the others when we look at the extra large icons in windows Explorer.

  Is this faster thumbnail upload because the db file "thumbnails"?  If so how can I get this file created in all my photo and video files?

  Thank you.

  Hello

  Which popup you are referring to?

  Each time seen miniature is enabled or has been enabled in Microsoft Windows the hidden thumbs.db file is automatically created in the same directory than where thumbnails have been read. This file contains the information required by Windows to display thumbnails for each of the icons and will be placed in each model file are read. Thumbs.DB looks a lot like its name. It stores the graphics, the film and some document files, and then generates an overview of the content of file using a cache of thumbnails. This file can be deleted safely from any directory, however, it will be automatically recreated if thumbnail display is always on and you open this directory again. Thus, it is not related to upload faster thumbnail.

  Let us know if you have other questions related to the issue. We would be happy to help you.

• Lightroom does not display the imported iPhone videos

  Hello

  I'm on Lightroom OSX 10.11 6. I convey through pictures and videos from our family iPhones (iPhone 6).

  Photos work very well.

  Videos are not.

  In Lightroom, all video files (.mov) that originated on our iPhones have an exclamation point next to them with 'Lightroom has encountered problems reading this video' - and will not play in Lightroom (note that Lightroom knows the video length - this is displayed on a gray background in grid mode - so he can get at least _some_ of information from the mov file).

  If I ' Photo > show in finder '-the video will play absolutely perfect QuickTime Player.

  Can someone help me with what could be the problem? This seems like a simple thing to not working do not...

  See you soon,.

  Dave

  Hi aconstnull,

  You should have all the videos recorded on its particular location and must be accessible via the finder, if you import videos under Photos or iTunes then Lightroom won't be able to see.

  Lightroom can import the following formats:

  • Camera raw formats
  • DNG
  • TIFF
  • JPG
  • PSD
  • CMYK files
  • PNG
  • AVI, MOV, MP4 and other video files

  Reference: formats of files supported in Lightroom

  Let us know if that helps.

  Kind regards

  Mohit

• How to stop "the transfer of video data" display on Twitch full screen?

  When switching to full screen when viewing a stream of shaking, a collection white/status box appears in the lower left corner of the saying of the screen "to transfer video data. "# {a kind of address}.
  Passage of the mouse causes the box to reach the bottom right.

  This does not happen to contract full screen in other browsers (IE and Chrome)

  Found, with the help of reddit.com/r/firefox/
  Mode full-screen status-4-Evar/advanced/Detect uncheck...

• How to get the weather channel videos to play in the Firefox update?

  Perfectly updated Firefox and Shockwave flash. Weather Channel videos cause a black screen with no option, but all the other sites I've tried seem to work well.

  Just for everyone's information...
  The problem turns out to be with Weather.com and Ad Block Plus. Weather.com has started adding ads at the beginning of their videos, Ad Block Plus blocks them like it's supposed to... The only way around this is to disable Ad Block Plus on the Weather.com site.