How to do the trick of the fade-in

Similar Questions

• How to eliminate the fade in and out between the slides in Captivate 6?

  I tried to go to the locations suggested in this same topic for Captivate 5, and my settings all appear to be correct.  Fade in and Fade out on the first/last slide are unchecked.  Each individual slide's Transition not verified; each individual element also has the Transition not verified.  When I discovered the master slide I see no option - I get only the part 'General' of the menu - even when I click on the model of slides in the timeline panel.

  I'd appreciate a lot any help you could give.

  Hello

  Glad to know it worked

  If there are answered you post, please mark it as correct.

  Thank you

  Vikram

• I don't have a message to tell me the image my takes up screen is set to full screen. How to disable the who and the fade slow when he goes to fs?

  In Firefox 42

  When a site like youtube when I make the video fullscreen it just melted slow useless when it does. And then tells me that it is full screen. I know that it is full screen for two reasons. One, I hit the button fullscreen. Two, the video takes up my entire screen. The message point. Use the fade. How can I disable them?

  To disable the fade, you can change these preferences of the topic: config page.

  • full-screen - api .transition - duration.enter: "0 0".
  • full-screen - api .transition - duration.leave: "0 0".

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  I do not know how to disable the warning, but it might be possible to hide this message with code to userChrome.css or elegant.
  This message is displayed for security reasons because a malicious script can switch to full screen mode and take over the entire window without noticing you (i.e. show a fake office).

• How to make the content of the DIV on the page that I'm going to fade out?

  I'm trying to figure out how to make the content of a DIV on the page I'm clicking away from fade. I know how to do the Next page load with a fade in. So I'm half there (I guess).  WiX has many designs which use for this purpose. Here is a link to an example:

  http://www.wix.com/website-template/view/HTML/633?originUrl=http%3A%2f%2Fwww.wix.com & numbe r page = 1 & = 1 position-in-page

  This is the code I use to make a DIV load with a melted in:

  I have add this CSS code in the div I want to apply the fade in effect to:

  Animation: fadein 2s;

  -moz-animation: fadein 2s; / * Firefox * /.

  -webkit-animation: fadein 2s; / * Safari and Chrome * /.

  -o - animation: fadein 2s; / * Opera * /.

  And I add this additional code to the CSS stylesheet:

  }

  fadein {} @keyframes

  of {}

  opacity: 0;

  }

  to {}

  opacity: 1;

  }

  }

  @-moz - keyframes fadein {/ * Firefox * /}

  of {}

  opacity: 0;

  }

  to {}

  opacity: 1;

  }

  }

  @-webkit - keyframes fadein {/ * Safari and Chrome * /}

  of {}

  opacity: 0;

  }

  to {}

  opacity: 1;

  }

  }

  @-o - keyframes fadein {/ * opera * /}

  of {}

  opacity: 0;

  }

  to {}

  opacity: 1;

  }

  }

  Tutorial with demo & downloadable files here: http://www.onextrapixel.com/2010/02/23/how-to-use-jquery-to-make-slick-page-transitions/

• Tecra M5 - how to remove the screen hinges

  Hello

  I need to replace the hinges of the screen (well one of them anyway)
  I have the manual maintenance and computer in bits.

  The manual says "Disassemble the hinge (left) while drag and spin it.", but no matter how hard wiggle/slide/tour that I can't get out.

  Same problem with one of the other side.

  Someone has it already done this and have any advice or know of an educational video somewhere?

  TFAI

  Hello

  To my knowledge there is no textbooks that would show you how to disassemble the unit. Such dismantling manuals are made for the Toshiba service guys.
  Then maybe you'll find some tips and tricks on YouTube or would need to contact a Toshiba technician to remove

• Tecra S11 - how to enter the BIOS?

  Hello

  I have a Tecra S11 with windows 7 Enterprise 32-bit installed. I want to make a backup image and install Windows 7 Enterprise 64-bit. However I can't understand how to enter the BIOS to change the DVD player to the first boot device.

  After that 1 second a Toshiba logo, I asked a user password, after that it directly starts in the currently installed Windows 7.
  ESC, del, f1, f2, f10, f11, f12, tried them all, but no BIOS menu is located. What is the trick?

  GR,

  Hello

  According to the user manual you must press the F2 key to enter the BIOS setup, but you must press the front key Toshiba logo appears.
  It work?

  Alternative, you can change the boot order using tool "Toshiba HWsetup' which is preinstalled on your laptop.

• How to adjust the placement of the façade of a under VI secondary school

  OK, so I learned how to use the tabs and how to set of Sub VI in the tabs. Finally, I would like to change the position of the front of some of these sub VI

  because they are not laid out for my taste 
  What is the way to go?
  Thank you!

  by default, a VI loaded in a secondary will appear with the same position of FP only when you saved it last.  It is not often you want, and it's easy to move the public Service inside the window and forget that you change it.  But it should be good enough to go.

  a trick I use is to load the Subvi in the secondary with the same origin in each.  If the façade both the part he is in have their own contact information.  For the pane (which is normally the limit of the window, and this is the secondary limit) is the origin 0,0 in the upper left corner.  On the façade, are looking for a small point with the visible grid.  It is (0,0) on the PC.

  So what we can do programmatically is to use nodes property to set the origin of part of the façade:

  (LV2009f2)

  OK, so the food extract my constant, but there should be two 0 (I32) in this cluster.  Simply create a constant on the original property, and it will.

  B

• HP 9470 m Ultrabook, Win8 - how to get the 3G connection?

  Hello

  I got a Ultrabook 9470 m of work with Win7 installed. Everything works, cool, but I wated Win8 (64 bit) for my own stuff. So, I installed Win8 (dual-boot) for my use personal. Of course, I have no HP drives or whatever it is. -No worries, I found all drivers for Win8-64 in this site ok. And now everything is recognized correctly.

  But I don't know how to get the 3G card to connect. On Win7 HP connection manager takes care of that. But there is no connection manager for Win8. And google results only direct me to choose the network in the bar 'charm '. Great, but there are only available WiFis appear...

  ... --- ...

  Well, I finally got this resolved. -As usual, it'S just a driver issue, as always with Windows... I suppose that there is nothing new under the stars.

  In any case. Thanks for Cloud_Strider to point to the firmware upgrade. I did, but it alone did not help. BUT I don't know if it was still a part of the solution. So, thank you!

  Unfortunately, Ericsson or Navatel drivers broadband did the trick. -It's the only ounces available on the site of HP support for this laptop. = (Fortunately, I had (finally) look in Device Manager to see what drivers are installed. Seems that this braodband card is a HP un2430. Looking for these drivers for WIndows 8 on Google showed me finally good page on HP which she link to fresh (from March 2013) drivers for this card.

  After removing the old drivers (+ restart) and new (+ reset) installation, broadband is now available. I now write this with happiness through 3 G connection. =)

• How to shorten the music file to match the selected slides

  I created a slide show with windows vista movie maker.  How to shorten the music files to match both of the selected slides.  Using the fade out option did not work

  Hello

  You can try the following methods and check if it helps.

  Method 1:

  (a) open your filmmaking program and create the slide show using your photos. Choose the options you want for changes between the photos and the duration of each photo display. If you need help, then check out the help file in your theater program.

  (b) open the import file dialog box. In Windows Movie Maker, it is in the part of '"movie tasks', section"vidéo Capture." Browse your files to find the mp3 file you want to import, select and import it. Will import it into filmmaking program but it will not in the video.

  (c) search for the file in your filmmaking program and import it into the film. In Windows Movie Maker, you can drag and drop the file in the position in the window of time movie online, where you want that song to start playing.

  (d) scroll through the timeline until the end of the song. Drag the end of the song in a position to match the end of your slide show. This will be the end of the song at the same time exactly like your slide show.

  (e) read your film completely from the beginning to the end and ensure that everything is with the song the way you want that there. If you are satisfied with the finished product, then export the movie to the right format and the file will be ready to play.

  Method 2: Work with clips in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker

  Reference:--

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker#

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

• How to call the setting menu of the BIOS on HP DV4 1540us netbook?

  Hi all

  How to call the setting menu of the BIOS on HP DV4 1540us netbook?

  F2 does NOT an on-screen BIOS setting.

  Is there another trick?  Or, perhaps, defining the procedure step by step to start the BIOS?

  TIA

  Power on the laptop and all logo HP being displayed, press F10.

• How to stop the Magnifier program activation at startup

  original title: I want to delete a "program".

  Forgive me for the use of terms laymans.

  Today, I see that on a user account Magnifier is activated at startup (log - on). I don't know how to make this stop. I tried to do something and got a message saying "disable permissions that inherits. I have some research here and "done something" according to a help page for Windows XP. I probably did more harm than good.

  I would like to delete the program, but it is not listed in Add/REMOVE programs (or is to REMOVE/CHANGE).

  Should I just delete the user account and start over?

  In addition, it is a fact that Vista does not automatically like XP restore points don't? Under Vista you must manually perform a restore point? In other words, on the XP computer I go to system restore and try to fix this mess. On Vista, I have found that "system restore." I have found where it is said today to a restore point, can not choose 3 days ago... because I have no previous restore points. I so widows updates

  We just got this PC and I am trying to set up for the family.

  Thank you.

  Go to start / Control Panel / ease of Access / facilitate the expect to see / and uncheck the box to turn on the Magnifier.  If this resolves the problem in this account, go to start / search box and type msconfig.exe and enter and then double-click on the program icon that appears.  Go to the starup tab and see if something related to ease of access or your magnifying glass is included - if so, uncheck the box to prevent it from running at startup and that should fix the problem.  If you can't find any such program, go to the services tab and look for the same thing.  If you uncheck the box, so it does not start at startup and that should fix the problem.  Here is an article on how to disable the Vista Magnifier that should work in the world and for all accounts: http://www.vistax64.com/tutorials/125037-magnifier-turn-off.html.  I suspect that this will do the trick.

  If none of these options works, you can always consider the account as a corrupt user profile and fix it usinghttp://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  =============================================================================================================================

  Like XP, Vista DO restore points do auto - there just need to be told to do. http://www.Vistax64.com/tutorials/169523-system-restore-task-change-automatic-restore-point-schedule.html orhttp://www.howtogeek.com/howto/windows-vista/change-how-often-system-restore-creates-restore-points-in-windows-vista/ (this second one is a little easier to follow).

  To find the system restore, go to start / Control Panel / backup and Restore Center / and to the left are two options - one to do a system restore and the other to create a restore point or change the restore point settings.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to disable the F1 key HELP

  How to disable the F1 help key in windows vista

  There is no way to do this under Vista.  It is possible that some 3rd party programs won't work - but most don't work with some keys and function keys are often not included.   I spent almost an hour to research and come up with only the following (and that cause extremely advanced registry editing that I have does not feel comfortable recommending that even I would have trouble following him).

  Here is a program which doesn't specifify no limitation (although this means not it not all):http://www.howtogeek.com/howto/windows-vista/map-any-key-to-any-key-on-windows-xp-vista/.  You can do a test to see if it does the trick.

  If this is not the case, look for "keyboard remapping in Vista" in Bing, Google, www.tucows.comand www.download.com to see if you can find a program that works (and works with Vista).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to apply the "Slate Pro Light" using CSS font?

  Hello

  Could you tell me how to apply the font of "Slate Pro Light" using CSS? I have not found a solution for the 'Light' slate Pro variation selection.

  Thank you.

  I usually use the definition of CSS of police-family at the following address on my html and body elements:

  font-family: "Slate Pro", Slate, "Myriad Pro", "BBAlpha Sans", Helvetica;
  

  Potentially adding "slate Pro Light" should do the trick. Alternatively, you could take advantage of the make-weight property when you need a lighter framework:

  font-weight: normal|bold|bolder|lighter|number|initial|inherit;
  

  In this case, lighter, might do the trick?
  

• ST2220T repair? How to remove the shell back and standing?

  Hi all

  I just took my beautiful ST2220T and I need to remove the stand in order to have the screen adjustment / layout that I need. I tried to find a service manual, or some instructions on How to remove the back cover. I have a lot of experience with the hardware, and that's why I'm looking for it :) Because each new device has some trick in his bag and I really don't want to accidentally do something I might regret later :)

  Thus, any help is very appreciated :)

  Thanks in advance,

  Voja

  Cave of dwarf,

  Dell does not open any monitor to fix them. We will send them the manufacturer to do this kind of work. This is why we do not have any "Service Manuals" for Dell monitors. The ST2220T is not designed by us to have the base and back cover. Any damage caused while attempting this is not covered by the standard Dell warranty.

• How to change the Makefile to link the .so lib?

  I use the makefile to compile the native application under the window platform.

  I had added some libs to the commune, mk as below, when I need.

  "

  # Add your library names required here
  "LIBS += m bps strm jpeg freetype mmrndclient.

  now, I'm the openal tring and add "OpenAL alut asound" at the end of the LIBS. Like this

  LIBS += m bps strm jpeg freetype OpenAL alut asound mmrndclient

  but the console says

  «do-j 1 - Co.le - v7 - g - fMakefile all the»

  make [2]: * not target "libOpenAL.a" rule, which need to have

  "

  I have research the files under the "BB10SDK", only the libOpenAL.so exists in the mind of mine, there is no difference between .a and .so when compiling.

  How to modify the makefile to share the link to the .so file?

  Thank you

  DO not follow the flag of LIBS in the defaul common.mk
  LIBS += m bps strm jpeg freetype

  Using the LDFLAGS tag, add all your libs below
  "+= LDFLAGS - Wl -, z, relro - Wl, z, now $(if $(filter g so shared, $(VARIANTS)), - pie)" "
  Like this:
  += LDFLAGS-lm - lbps - lstrm - ljpeg - lscoreloopcore

  so many trickly for BB Dev, is it funny or nightmare?

  Another topic, how to cross - compile...

• How to adjust the boarders of a rectangular selection in the paint without stretching the image.

  Hi, how to set the boarders of a rectangular selection in the paint without him stretch the image?

  I'm afraid this is a limitation (and personally, I find frustrating) paint. Essentially, you get a chance to make a selection. A trick I learned is to zoom as high as possible, start a corner of the selection, and then (while holding down the left button of the mouse to the operation drag) hold Ctrl key while turning the mouse scroll wheel to zoom out giving a larger surface to complete the dragged selection.