Why is slower than on the glDrawElementsInstanced iPhone6 glDrawElements?

Similar Questions

• Alt in CS6 dropper is slower than on the earlier version?

  Hello

  I'm used to paint by clicking quickly drops alt eyepieces and paint in quick succession. Its been my method of paint on all the photoshop to CS4, I just moved to CS6 and a very annoying bug prevents me from doing this effectively.
  When eyedropping there will be a small delay after selecting the color where, if I click again to paint I will get sound windows burst like it was currently impossible to paint. If I wait half a second after picking, I can paint well, but this slight delay is enough to drive me crazy and really slow me down since I do, I don't know, 2000 + brush STROKE / day. No idea what causes the pipette to be slower than before? I disabled the color ring which was new to me, but that didn't fix it.

  I think that I found a solution to the question of drops eyepieces.  He solved the problem in my case, I hope that it will work in your case also.  It ends up being a conflict of Windows and is not a problem with Photoshop... Sorry Adobe.

  Do the following-

  
  

  Control Panel-

  Stylus and touchscreen.

  'Click' on ' hold down / right click»

  Turn off press and hold for right-click

  * I also disabled use of the stylus button as a right-click equivalent

  There is no slowdown problem now with the pipette for me, or have the pipette don't pop up at all when I hit the ALT key .

• Playback of a view is much slower than reading the table

  Hello
  
  I use the view in the physical layer. Query from this point of view is quite compilcated. However if I use correct filters the result is very fast (a few seconds)
  
  Responses of dashboard if I put a few columns from this point of view, and use the same filter, to 4 to 5 minutes to get the result. I don't know why the reading of the opinion is so slow on dashboard.
  
  If I create a table based on the view and use this table in the physical layer, then the result is much faster.
  
  Thank you

  Hello

  When the function u view the report in the bi bottom server sends the request to the database (if the cache is disabled).
  Come see, you already mentioned this query view is quite complicated, fires every time the query whenever you click on the report and checks all aggregations, the filter conditions, and joins.
  come to table, you are calculated and stored, each time that you run the report he just send the query like Select from table *.

  for this reason, the data view recovery is slow to table.

  See you soon,.
  Aravind

• Guest WiFi network much slower than normal on the network

  Speedtests leave a device attached to the 5 GHz wireless guest network are much slower than when the same device is connected to the normal 5 GHz WiFi.

  I measured reproducible all about 7ms 18/10 down on the network of comments and 1ms 320/250 Mbps on the normal network. Same place, same camera, same speedtest app, same test server.

  Similar results of multiple devices (laptop, Windows, iPhone 6 s). No change after a reboot. QoS is off. Firmware is 1.0.6.28_1.1.83.

  What could be the reason? I don't think that I had the same problems a few months ago, but I has not changed settings since then, except for the upgrade of the firmware when a new version appeared.

  Thanks for your advice.

  that version was pulled and pulling FW rarely happens... back having previously worked FW

• Why is my slower than wifi ethernet download speed when using the airport extreme?

  Hi all

  This is my first post here, so please bear with me. I currently own stunted 2011 Macbook Pro 13 inch and an extreme A1521 from the airport. My ISP has promised 50Mbps downloading and sending 10 Mbps. When I connect my MPro via ethernet/wi-fi to my modem I get as promised. When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok. However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps. Anyone know how to fix this?

  If you check the 'fine print', your ISP has promised "up to" 50 Mbit/s and 'up to' 10Mbps.  The ISP might provide more than that during periods of slow activity, like the days of the week during the day, but much less during evenings when there are many more users on the Internet.

  When I connect my MPro via ethernet/wi-fi to my modem I get as promised

  I assume that you meant to check the Ethernet connection, you disable WiFi on Mac when you do this. And unplug the Ethernet cable when you check the speed of the WiFi, correct?

  If so, this tells you that the Ethernet port to both the modem and the Mac work properly, and WiFi work correctly as well.

  When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok.

  If this tells you that the Ethernet connection between the modem and the AirPort Extreme works correctly, and wireless works fine on the AirPort Extreme.

  However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps.

  Well, you know that the Ethernet connection between the modem and AirPort Extreme works because you can register 48 Mbps Wireless.

  Thus, the possibilities are narrowed to two elements at this stage:

  (1) the Ethernet cable is defective or making intermittent contact. Try another Ethernet cable, to ensure.

  (2) If you have turned off AirPort Extreme and rebooted several times, and you know that the cable between the Mac and AirPort Extreme works properly, then you have reduced the question down to the Ethernet on the AirPort Extreme, which is probably defective switch.

  If you have not already done so, try other ports Ethernet on the AirPort Extreme.

  As a last resort, perform a reset material on AirPort Extreme and put up again. To perform the Hard Reset... power on AirPort Extreme for a few minutes, then hold it pushed in the reset button on the back of the unit (near the AC power plug) for 7-8 seconds and release. Allow a minute for the AirPort Extreme restart orange light flashing slow.

  I once went through two consecutive airport extremes with the same question about 8 months ago, so it can happen.

  If you're still having problems, then it is time to take the AirPort Extreme of Apple Store... If you have one near you... or contact the Apple Support directly by clicking on 'Contact the Support' in the upper right area of this web page.

  Good luck!

• Slower than other computers on the wireless network

  Hello
  I get a download speed that is slower than the other two laptops using my wireless network. I have 20 MB broadband and get ~ 3Mbps when I test the speed. Usual maximum download speed is 12-15 Mbps for other laptops. Download speed (~ 1 MB/s) and service effiency (92%) are the same I have connect directly or connect wirelessly.
  I plugged directly on the wide-band receiver and speed was ~ 12 Mbit/s, then there is a problem with the wireless connection.
  I ran diagnostics using Intel PROSet and there seems not to be problems. I can't understand why the download speed is stuck around 3 Mbps. Any ideas?

  DELL Inspiron 1520
  Intel Wireless WiFi Link 4965AGN (802.11 g)
  NETGEAR 54Mbps WGR614 v7

  
  

• 2 x Satellite A350-22z but that is slower than the other

  My homefriend and I same computer laptop Toshiba A350-22z but my laptop slower than others.
  I hope that the problem is the highest frequency; mine is %32 other is 100%

  http://img4.imageshack.us/img4/7532/39490208.jpg

  What is the problem in your opinion?

  Hi erdemrek,
  I don't see what exactly is the problem you are talking about but:
  If you have the same processor, the same amount of ram, same brand, model, same installation then everything should be the same.
  What do you mean "more frequently" unfortunately I don't speak your language to that effect, I can't read the text on your image.
  If you test the speed of the machine to be sure to use the same utility (benchmark).
  load on a system differs depending on the services and applications launched and running.
  could you give some more information about this problem?

  as a first step, you can try to change the hard drive and see if there is no change. If it's a software problem, it should appear on the other machine as well when changing the hard drive.

• Is there a new 'fix' for a 9 year old XP Home computer that runs a lot slower than it used to? I do the interview, but nothing works

  In 9 years. I re XP 5 times because it was the ONLY done fixthat my Dell Dimension 8250 run fast. I kept all the updates, ran the cleaners of files, defragmented the hard drive, put the parameters to performance don't not Visual, even added more than 512 MB ram (1 GB total) that has MADE for a month or 2 really speed things up, but it is also to slow. The last time I put the XP disk in there was this msg: "Setup cannot continue because the version of windows on your computer is newer than the version on the CD. ANY HELP is HIGHLY appreciated as this is the measure of my ability of fix - it - happy to post here any info you need to diagnose this bottleneck problem, thanks, Patrick

  Do yourself a favor. After your next relocation and after you get it until you're happy with it (install SP3 and all subsequent security patches, install all the programs that you use regularly, install a good antivirus, install the latest versions of Adobe Flash and Java, etc.), make an image of your hard drive. This way you will EVER need to reinstall your OS again! Acronis and Paragon are good programs. DriveImageXML is a good gift (but doesn't have as many features as imaging programs paid).

  About the General slowness, here are the usual causes:

  1. malware (malware). You need to rule out first! This page has excellent information:

  http://Web.archive.org/Web/20080610163247/http :// www.elephantboycomputers.com/page2.html#Removing_Malware

  2. some programs aimed at combating malware (for example, Norton and McAfee). Ironically, they can slow things down because they use simply much too many resources. Sometimes they cause conflicts with other programs. And their default mode is to scan your entire hard drive whenever you start. Fortunately, there are other programs of anti-malware software available that use much less resources (p. ex., NOD32, Avast and Avira).

  3. too much of certain types of programs still running in background - with or without your consent. (Then again, a lot of programs running in the background of the consequences trivial.)

  To determine each program and process, you are running, use the task (Ctrl + Alt + Delete) Manager and click the processes tab. You should be able to sort by CPU usage or memory usage for a good ideas that are resource/memory hogs. You must write the names of all the processes for future detective work (or take a snapshot and print it).

  Use these sites to determine what these programs are, and learn how configure them to not always run when starting:

  http://www.PACS-portal.co.UK/startup_content.php#THE_PROGRAMS
  http://www.bleepingcomputer.com/startups/
  http://www.AnswersThatWork.com/Tasklist_pages/Tasklist.htm

  Sometimes, it is recommended to use msconfig to configure programs to run at startup. A better, more thorough program is Autoruns:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  But before that, you must use the settings preference of the program in question. Otherwise, for some programs, they will return to the list of startup anyway!

  If you do not want to use msconfig, it can be accessed in this way:

  Start | Run | Type "msconfig" (without the quotes). Enter (or OK)

  4. not enough RAM, causing the PC too rely on the pagefile. A quick way to determine if what is happening is to open (Ctrl + Alt + Delete) Task Manager, and then click the performance tab. Then the three values under Commit Charge (k) Note: in the lower left corner: Total, limit and peak.

  The Total number represents the amount of memory you are using right now. The vertex figure represents the maximum amount of memory you made since the last boot. If these figures are lower than the value of the amount of physical memory (K), then you probably have lots of RAM. In case you want to study it more, you can run the Page queue Monitor for Windows XP:

  http://www.dougknox.com/XP/utils/xp_pagefilemon.htm

  5. you can also verify that the access mode of your hard drive has not changed from DMA to PIO:

  http://www.technize.com/2007/08/02/is-your-hard-disk-CDDVD-drives-too-slow-while-copying/

  and

  http://winhlp.com/node/10

• Why so slow and fat out put for only the clip size small 1 sec?

  Why so slow and fat out put for only the clip size small 1 sec?

  Hello

  I just apply simple ray tracing 3d in AE and then try to make it by media encoder

  Meia encoder says 4 hours so he could make

  my clip was 15 sec not hd (I do not change all of the settings in media encoder to make)

  then I cut it to 1 sec encoder media took 20 minutes to make

  out put

  4.12 MB

  .avi file

  1 sec

  Why what is happening

  This only happens when I apply ray trace 3d not for others

  Thank you

  As they say - "a picture is worth a thousand words" thus:

  This is a screenshot of the small video clip (full HD) with curvature layer with RayTracing (see render estimated times):

  

  And the same video clip with 3D classic (without RayTracing) and effect of Warp Mesh (rendering was so fast that he even showed no estimated time - but you can see the final rendering time):

  

  So you almost 1, 5 h with RayTracing vs 11 dry without.

• recently, I intend to download, but unfortunately this is already more than 5 attempts. Thanks to the slow connection and the power outage, my download has failed to complete. Would it not possible to download the app again? Concerning

  Recently I wanted to download, but unfortunately it's already more

  only 5 attempts. Thanks to the slow connection and the power outage, my

  to complete the failed download.

  Would it not possible to download the app again?

  Concerning

  A trial version is not different from the full version.  Using your serial number to activate a trial version, the access limit is removed.

  If you get access errors thrown at you when you try to use a download link, check that you have enabled cookies and clear your cookie cache.  If he continues to not try to use a different browser.

• 7 64 - bit slower than 7 32-bit

  Hi all

  I installed Windows 7 x 64, (given that some experts advised it instead of x 86 for me!). But this version is slower than the previous one (7 x 86). Why?
  PS: 1 - the applications are the same for both.
  2 - I have no malware.
  It's my form of system.

  3 - my measure is time. For example, the time that Windows runs the startup applications and also if you are using Windows. I feel and see the slowness of this x 64 compared to the x 86 one.
  I think that the (pilots) fine and see no reason showing that they are not.
  The speed of applications running at startup (applications at the bottom of the screen on the right) is very low (in comparison), but also after that, overall speed is not bad but it is less than 32.

  4. I think the problem belongs to the RAM. I knew that x 64 is certainly for machines that have more than 4 GB of RAM and the most important factor, is WoW.

  Do you agree?

  Download and run ADWCleaner:
  http://www.bleepingcomputer.com/download/adwcleaner/

  Download and run the Junkware removal tool
  http://www.bleepingcomputer.com/download/junkware-removal-tool/

• Calc scripts MDX on ASO is 20 x slower than calc on OSB?

  Is it true that calc scripts MDX on ASO's 20 x slower than calc on OSB?

  Our consultants Essbase dear wrote in their e-mail and training documents. I've never heard of this.

  Built a cube BSO staging area, loads all data source BSO. Run BSO Calc staging cube before exporting the level zero to ASO.  Is this crazy?

  Thank you.

  STOP THINKING LOT

  I agree with most of the responses seen above and actually works to understand that the ASO procedural process Calc uses during execution of their work.  This will help us all understand what kind of scripts will be quick and that are frighteningly slow.

  But, my first suggestion seeing most of the manuscripts I am presented with is: why are you using a calc script at all?  Calc scripts are often used when there is no higher level subtotals.  Well, they are always available to ASO.  The way I see it is calc scripts are really necessary when new data of level 0 must be generated and rolled up.  Or in the simple case of copies of data.

  Currency conversion is where they are most often used.  I can't convert each of the 5mm values that contribute to a higher level of $100 mm in order to convert $100 to 91,882,223 euros.  And, often copies of data are not really necessary, especially "real."  Conceivably contours where the plans and forecasts are dynamically seeded with latest figures real or actual same prerequisite.

  So look hard at your old practices first and Rob it of your scripts, anything that can be written as a successful formula of Member.  If nothing else the code remaining will most likely run faster.

  Note: Calc script processing involves the internal tree in which each dat file is organized.  I encourage anyone with an overview of this structure to communicate with me and maybe we can share observations.

• Why Safary does not load the content of pages?

  Why Safary does not load the content of pages? I mean, when I hover over the places where should be the content, he is always showing the "redirect to: [email protected]/" lower left. My Safari is 9.5 and worked fine until Safe Fimder Virus get inside my computer. Mozilla Firefox is a bit slower. If someone could give me an idea on how to deal with it, I would be happy.

  Sorry if my English is not good, I am a Brazilian who is still learning English

  Your English is very good!

  Redirects are usually due to adware or malware.

  Download the run MalwareBytes.

  It of free and takes only a minute or two. Which should remove all adware and malicious software on your Mac.

• New Tecra A4 - 170 - slower than my old Tecra 8000

  Hey!

  Since yesterday, I have my NB again at home and so far, I'm happy with it!

  It has a processor M760, with 2 GHz, 100 GB HDD, FSB 533 and such - but it is slower than my old Tecra 8000 with PII and 366 MHz with only 8 GB of HARD drive.
  Y at - it a tip or something I should fix, or is it quite normal when there is now software for nearly 10 GB (nothing special, just the software more pre-installed desktop, antivirus and internet, no games) on this subject?

  Would be happy to help!

  Meike
  :-)

  HI Meike,

  Your new Tecra running the same OS as your old?

  I would be interested to know if slow is during the initial loading of the operating system or if it appears when you actually use the system.

• Re: Satellite A200 LEFP6 is slow after updating the BIOS

  Hello

  I have a problem with my Toshiba.

  2 days ago, I installed a new driver BIOS on the computer. Since then, a laptop computer is running much more slow then normal. I don't know what to do?
  I want to get the previous Bios driver but I don't know how to do it and I don't wont to do the biggest problem that I have now.

  I chose good driver for my 'machine', Vista 32-bit (http://support.toshiba-tro.de/tools/eula/info_eng2.asp).
  Can you help me???

  I also have one more problem. My cd/dvd drive does not read the cd drive.
  Is it possible that the problem is Vista? Because a few months ago, I had a similar problem with cd/dvd player. This day someone we the internet forum advice change me something in (I'm not sure) a registry file.

  It is a good solution because the disappearance of the problem and everything was working properly until this month.

  Thanks for any help,
  So I hope you understand my English :)
  Nice day
  Tomek

  Hello

  Currently, the European driver Toshiba page provides a Vista 32 bit version of BIOS 2.50.
  Don't forget that your BIOS has been updated to 2.50. You can check in the BIOS settings.

  In addition, I also recommend setting the default BIOS.
  This can be done in the BIOS itself.

  But generally it s not easy t say why your laptop is slower. To be honest I don t understand what you mean by running a lot more slow then normal
  The laptop starts more slowly? Or what's a problem exactly?

  So now a few tips about you, CD/DVD drives issue;
  Yes, sometimes the windows sets some filter values in the registry and this may affect the functionality of CD/DVD drive.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37430&TSTART=0

  There you can find the solution.
  And here is the link to the useful program that removes these registry values
  [CD / DVD missing in "My computer" (Windows Explorer) Player: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=4457 82xml]

  Welcome them