How to enable Web Services?

Similar Questions

• How to enable web services and search for printer email address

  I am trying to sign up for the monthly INK from HP.  As part of the application, they ask me a CODE.  However, I can't CODE because I am advised that my Web services are not enabled.  How to enable Web services so that I can complete my application?  Thanks for any help you can offer me.

  Hello

  What model of printer you have?

  Assuming your eprint-enabled printer, please follow the steps below to connect to web services and get your email from the printer.

  To find printers e-mail you need to enable web services from the front panel of the printer. It is normally a button on the front panel or an option in a menu.

  The printer will be connected to your WiFI network, and once the device is activated, it should display a page with a code composed of letters and numbers. It is the e-mail address of printers (when you add a @hpeprint.com to it).

  Once you have this, go ahead and configure a connected HP account and register the printer to your account. This will allow you to manage settings of the ePrint printer but also to track the history of the work.

• Photosmart premium C310a missing c: eallinone enable web services in the web services settings menu

  I am trying to connect via the GET more button in the main menu and the printer will not connect to internet, everything else works fine. Look at web services menu not enabled email eprint printer is disabled. looking at

  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903 it shows enable web services, such as a menu item, that it is not present on my c310a. Any ideas?

  Hi @hunterj1957

  Welcome to the Forums of HP's Support. I understand that you are unable to access one of the applications on your Photosmart Premium C310 printer.

  I've included a link to a post of @PrintApper respect to platelets called HP Apps Service retirement on several printers.  It has information about apps on your printer.

• "Connection error. Check the Internet connection. "When you try to enable Web Services on HP 1606dn

  Error message "connection error. Check the Internet connection. " When you try to enable Web Services on HP Laserjet 1606dn.

  Operating system: Windows 7

  Thanks for the help,

  Howard

  Last UPDATED 21/07/13: after upgrading the firmware to the latest version, I could enable web services. Great help has this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw

  Thanks for trying to help.

  In my case, it did not help.

  I followed the instructions on this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw.

  The key was the update of the firmware, I think.

  Walter

• 8610 enabling Web Services gives the error "Unable to connect to the server.

  Hello.

  I'm looking to enable web services and get the message 'Unable to cnnect to the server. In this case, if I try to make the printer itself, or via the web interface.

  I followed the steps listed here: Re: HP Officejet Pro Service webization 8610 and it has not solved the problem. The printer is not connected wireless, it is connected via an ethernet cable. I have a static IP address set, and I have a manual DNS server is entered. For DNS, I tried 8.8.8.8 as well a DNS server in-house, and have solved the problem

  I haver tried restarting the printer after you make these changes.

  Web services previously worked on this printer, but then stopped, giving me the same "cannot connect to the server" message. I tried to remove Web services and time it and got to this point.

  The printer has been already updated the new firmware listed under the product support for this printer, version FDP1CN1416AR page.

  Thank you for your help.

  For anyone who is faced with this problem. The problem ended up being that the date was incorrectly set in the printer.

  From the web interface, you can adjust the date by going to settings > Preferences > Date & time. There is a checkbox to synchronize the date and time of the computer you connected from.

• [SOLVED] - how to invoke Web service through backing bean

  Hi all
  
  I'm new to the web service. I need to implement a web service in my application.
  
  I already posted my request in the forum
  
  [SOLVED] - how to invoke Web service through backing bean
  
  [SOLVED] New Web Services - need your help
  
  Please someone knows the solution means the poster.
  
  
  Thanks and greetings
  VB
  
  Published by: malek Balan on June 17, 2009 01:28

  Large. Yes, take the code of the main as entry point method, IE

  QuoteServiceSoapHttpPortClient myPort = new QuoteServiceSoapHttpPortClient();
  myPort.myMethod ();

  Be sure to include the customer file in your binaries.
  -olaf

  PS: Please rate the answer.

• Photosmart wireless 6510 works very well, but how now to enable web services & eprint?

  New wireless photosmart 6510 works well with my laptop (Windows 7) to home & router; How can I activate the web & eprint services NOW? During the initial installation, I was short of time and I think that the antivirus intervened and I don't have a printer email address. He said that I could do it later - how? When I use the Web Services Panel to printer it tells me that I am not connected to the server.

  Is there a pure easy way to add web services now without upsetting my wireless network settings?

  bjhulse22,

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. print a Configuration Page from network network printer or wireless menu.

  (Select the wireless icon, select 'Settings', select "Display Network Configuration", select "Print Info")

  2. open a Web browser and type the IP address of product (from the network Page of Configuration) in the address line. The HP - Embedded (EWS) Web server should open.

  3. click on the tab 'Network' (in the top menu), then click on the 'Networking' link (in the left menu), then click on the link "network address (IP).

  4. click on the small round button next to the "Manual of intellectual property", then fill in the fields with the information from the Page of Network Configuration (IP address, subnet mask and default gateway).

  5. under "Setting up the DNS addresses", fill in the fields with the following text:

  -Preferred DNS: 8.8.8.8

  -Alternate DNS: 8.8.4.4

  6. click on the "Apply" button and the settings must be updated. Once the settings are updated, turn the printer off and then back on.

  7. try to reactivate Web Services.

  Let me know if you have any other questions, please!

• CAN; t enable web service on HP Officejet Pro 8600 N911a

  N911a HP Officejet Pro 8600 that we have installed this printer as a network printer.  Everything works fine except that I can't activate the Web service to printing or scanning to an e-mail.  He says that the printer is unable to access the internet.

  Hello. Power cycle the printer and the router to see if that will clear up the error message. Do disconnect the router and then turn the printer off using the power button. Then plug the router back in and once it is up a running, turn on the printer and try to reconnect to the web services

  Then, if he is still unable to connect, I would set a static DNS on the printer. To set a static DNS, you must Access the built-in web server (EWS). Do so you by entering the IP address of the printer in the address bar of the browser of your choice.

  Once it opens your Officejet EWS, locate the tab titled 'network '. From there, look in the left column on the new page that will pop up and select IPv4, wired or wireless will depend on how the printer is connected to the network. That will bring up the page set static DNS. This will be the 2nd part of this page.

  Set the radial dial to the manual. Then, for the favorite/Primary manual DNS, set it to 8.8.8.8 and the manual Alternative/secondary to 8.8.4.4; then click on apply.
  NOTE: If another message with an option to click on 'OK' is displayed, read this message. Most of the time there is an option to cancel the change you did right and you want to avoid to click on this message. Just sail away this page by clicking on another tab.
  Power cycle the printer. Once the printer is upward and through calibrations to turn on. Try again to connect to web services by touching the icon.

• Is it possible to enable Web Services for eprint on the CP1025nw

  I use the HP Laserjet CP1025nw

  It is connected to a wired network with a fixed IP address.

  I am using Windows 7 64 bit

  When I click Activate to complete the configuration of Web Services - it telling me to check your internet connection.

  Internet works fine and all other aspects of the printer are working then how can I fill this configuration?

  Any suggestions please?

  Thanks John

  Problem corrected after thank you updated the firmware.

• How to access Web Services?

  Are there APIs to access existing exposed web services?

  I services published with their WSDL files and I need to access with SOAP over HTTP.

  How do you take in blackberry? Any API or do use you some kind of libraries third thrid?

  JSR 172 is supported.

  Download the Sun web services tool to generate stubs from the WSDL.

  You searched the Forum? There is a lot of discussion on this topic.

• How to refresh 'Web service data control'

  Hi experts,

  I use Jdev 11.1.1.5, and I would like to know how to refresh a Web Service data control, when changes are made to the web service (that is, add a new method, change the settings,...)

  Thanks in advance,
  Jose.

  Hi Jose,

  Check this https://blogs.oracle.com/shay/entry/updating_adf_web_service_data

  How to change or update the control of data is created once WebService?

  Nitesh

• How to consume web services REST in ADF - JDeveloper 11.1.1.6

  I have an ADF application deployed on Java cloud and I'm trying everything to try to get the data into it. I could not set up a connection to the Oracle Cloud server, to remedy this I created my db cloud instance RESTful web services. Now, I need to consume web services in my ADF application.

  Is there a way to link the ADF business components to RESTful web services in version 11.1.1.6?

  If not, then how is it possible to get data in your ADF application deployed on Java cloud? You cannot connect to the DB, you can not link to REST web services, how are you supposed to use your data?

  Thank you.

  Check out hands-on experience on Oracle products: deploy Oracle Cloud database objects using JDeveloper for the part of the database and hands-on experience on Oracle products: deployment of Applications in the cloud to Oracle using JDeveloper ADF on how to deploy an application in the cloud.

  Timo

• HOW URL WSDL Web Service: Web Service call in the workflow

  have a 1 step, Web service workflow: call the Web Service.  I wish I could pass a string parameter to the url of the endpoint for the parameter of the URL of the WSDL in the Web service settings dialog box as oppose to the transmission of the actual url (http://machine/some_service.svc?wsdl).

  The reason is that we are moving the workflow between environments DEV, TEST, etc., we do not want to reopen the workflow in each env and update the DEV, TEST endpoint.

  I tried the following without success

  1. create a parameter of type String devURL

  2 by default, set the value on http://machine/some_service.svc?wsdl

  3 Goto service web appeal stage and set the URL of the WSDL to the /process_data/@devURL

  I get the error:

  java.io.FileNotFoundException: \process_data\@devURL

  at org.jboss.net.protocol.file.FileURLConnection.connect(FileURLConnection.java:94)

  at org.jboss.net.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:103)

  at org.apache.xerces.impl.XMLEntityManager.setupCurrentEntity (unknown Source)

  at org.apache.xerces.impl.XMLVersionDetector.determineDocVersion (unknown Source)

  at org.apache.xerces.parsers.XML11Configuration.parse (unknown Source)

  at org.apache.xerces.parsers.XML11Configuration.parse (unknown Source)

  at org.apache.xerces.parsers.XMLParser.parse (unknown Source)

  at org.apache.xerces.parsers.DOMParser.parse (unknown Source)

  at org.apache.xerces.jaxp.DocumentBuilderImpl.parse (unknown Source)

  at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:369)

  at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:420)

  at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:482)

  to org.apache.axis.wsdl.gen.Parser$ WSDLRunnable.run (Parser.java:361)

  at java.lang.Thread.run(Thread.java:595)

  I don't think that the URL of the WSDL parameter can even accept a parameter as the username + password settings.

  Is this possible?  OR if not, how can this be achieved?

  Under the Service Web Options change 'The Option' use 'variable' instead of 'literal '. Then click the Green + and it will create a variable of type WebServiceSettingBean.

  You can use a setValue before the stage of web service to set this variable.

  Jasmine

• Enable Web Services on HP LaserJet CP1525nw

  We are trying to install web print on HP LaserJet CP1525nw service.

  This is a printer over the network from a server windows server 2008 R2 for Windows 7 x 64 machines

  It is connected to a network wired and all (printing etc.) works execpt WebService.

  We manually set DNS 8.8.8.8 and 8.8.4.4 secondary and restarted dns

  We also have white listed IP of the printer on the firewall, so it has access to the internet through the network without be filtered. (Did anyone know what are the IP address for the web services on the HP circuit?)

  When access us the printer using its IP address and go to the configuration of Web Services and click on 'Activate' it is on the screen for about 2 minutes and does not

  "Connection check connection error".

  Any advice is much appreicated.

  Success his works now!

• can not enable web services. printer on the network. ip address by default do not connect using auto ip

  B210 - tried to reset the default values. default IP address does not connect to the network with auto that IP had to manually set IP addrtess something similar to the properties on the zone reactive verzion. can not disable web services - never activated.

  no primary or secondary DNS server. not sure if this is problem. can print ok via network.

  I used the manners of address google DNS gave you me and it connected to the web and downloaded the updates and gave the address of e-mail. I t may have had difficulties as the gaveme just of the printer a message that he could not reconnect. not sure about that. Another question please. Do I need a setting WINS? I'll try an email print from a different network. Thank you