How to enable windows firewall, in the model of sony vaio vpceb36fg

Similar Questions

• Cannot depend on Windows Firewall after the removal of virus.

  I've removed a virus, but cannot enable Windows Firewall.  The error is "due to a problem not identified, Windows cannot display Windows Firewall settings"

  @Tricky300 good advice

  @krw006

  Each of the variations of the sirefef are extremely wicked him force more often you to reinstall Windows. The reason is that changes made to the file system is usually bad. I'll be happy to try to help you to see if we can get the system to its original state by removing the malware. Unfortunately, the problem is that the file system become corrupt you remove malware. This can often leave you with a computer that won't start plu.

  I would like first of all for you to get all your personal data off your computer. You have an external hard drive, cd/dvd disc or a disc thumb/flash that you can put your personal data for backup? In the affirmative, please download the data.

  Finally, I would like to know how you want to move forward. As stated, I can help to see if we can remove malware or I can help you format the drive and reinstall Windows. Of course, this assumes you have a Windows disc or another recovery option.

• How to disable caps lock / disable the notification of the computer laptop sony vaio

  I want to disable caps lock / enable pop-ups in the computer laptop sony vaio.

  Whenever I press Caps while using an application full screen like any game, it brings me back to break my game or as the desktop application.

  I tried to do this using easy access in the Control Panel, but it did not work.

  Please tell me how to do it. I pasted a picture here so that you can get a better idea

  The image of what appears:
  [IMG] http://i47.tinypic.com/28re35h.jpg [line]
  http://Tinypic.com/r/28re35h/6 - click here
  Don't forget: I don't usually turn off the key lock, I want to disable the notification that is displayed by pressing the capitals enabled.
  In addition, during the strike, this notification disables typing for 3 seconds. This notification is very annoying
  Additional note:
  I have a desktop windows 7 (custom) and a computer laptop sony i3 which is one year old.  Non of them illustrates this notification.
  Only this computer based i5 laptop vaio's I bought 3 months ago.
  I simply disabled options in ease of access and now same num lock gives notification, then its certainly a problem with windows.

  tried that, but it did not work.

  Additional note:

  I have a desktop windows 7 (custom) and a computer laptop sony i3 which is one year old.  Non of them illustrates this notification.

  Only this computer based i5 laptop vaio's I bought 3 months ago.

  I simply disabled options in ease of access and now same num lock gives notification, then its certainly a problem with windows.

  someone is always there to help?

  THIS PROBLEM IS WHEN CONNECT BLUETOOTH TO YOUR COMPUTER KEYBOARD, IT HAS NOTHING TO DO WITH YOUR KEYBOARD, BUT IT IS FEATURES RATHER USELESS INCORPORATED BY THE MANUFACTURER OF THE COMPUTER.
  IF YOU HAVE A DELL, LENOVO OR ANY OTHER BRAND, YOUR SOLUTION CAN BE OF THE USELESS "" QUICKSET. "." EXE"PROCESS.

  WELL, after days of looking for a specific response from VAIO, finally I came with a solution for VAIO users whose computer is equipped with a receiver to blue tooth ATHEROS.

  1 - type "regedit" in Start-Run menu to open your registry database.
  2 - navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\ATHEROS\VistaAddOn\KBNotify
  3. - the value of '0 '.
  Close regedit, restart your computer and you're done.
  Be careful not to change anything else in your registry, unless you know what you're doing.
  FIND THE ANSWER TO THIS QUESTION TOOK ME SEVERAL HOURS, SHAME ON MICROSOFT AND SONY, IT IS THE MOST STUPIDEST USELESS FILM THAT I HAVE EVER MET.
  If your bluetooth receiver isn't ATHEROS, simply look for the brand name of your receiver instead of 'ATHEROS' and look for a similar register, it may look like 'BTTray', 'BTNotify' or similar.
  Good luck

• Windows 7; Windows firewall prevents the discovery network, files and printers, sharing, public folder sharing and streaming media

  Windows Home Premium SP1, completely up to date.  Windows Firewall is enabled.

  Try to keep the file sharing and printers on a home network.  Try changing the settings on the control panel; All Control Panel items: Center network and sharing; Advanced sharing settings.

  When I try to change the option buttons for sharing, then click on save changes at the bottom of the page, the screen jumps to the network and sharing Center.  Object entering the settings advanced, no parameters have been recorded.   The comoputer restarting does not help.  I checked that the following services are running and set to automatic according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-turn-on-network-discovery-and-media-streaming/98654e71-4bff-4dd3-acec-ffc3524d44a4;

  The base filtering engine
  DNS client
  Function Discovery Provider Host
  Function Discovery Resource Publication
  HomeGroup listener
  HomeGroup provider
  Server
  SSDP Discovery
  UPnP device host
  Windows Firewall

  When I stop the Windows Firewall service, I can activate the sharing I want.  Of course the windows firewall prevents sharing I would do on my network.

  I'm uncomfortable with Miss having a firewall work on my computer.  How to configure my Win 7 machine windows firewall to allow communications with my homegroup?  I tried to restore the default values.  This did not allow the communication.  I tried to find the homegroup settings in the advanced settings of the windows firewall.  No luck there.

  What should I do to configure my windows firewall to allow network discovery and file sharing of printers and media streaming and sharing?

  Hi stephanie,.

  Thanks for joining us out on Microsoft Community Forums.

  Looks like the Windows firewall prevents the discovery network, files and printers, sharing, public sharing of files and streaming media. We will analyze and identify the cause of the problem.

  You have a third-party antivirus installed on the computer program?

  Method 1:

  To turn on network discovery
  
  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the left pane, click on change settings for sharing advanced.
  2. click on the chevron to expand the current network profile.
  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide
  confirmation.

  The article below explains all about the network discovery:
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  If any of these responses not solve the issue, let us then run the sfc scan and check if any file system is corrupt. I also recommend to perform a clean boot in order to find the root cause of the problem.

  Method 2:

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833

  See also:

  Open a port in Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/open-a-port-in-Windows-Firewall

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Hope this information helps. Get back to us if you have more queries about Windows.

• How to enable windows updates? Error: 0x8DDD0003 - Windows Update was disabled by your system administrator.

  Original title: how to enable windows updates?

  I get an error 0x8DDD0003 that indicates the windows updates are disabled by the administrator and the windows update does not appear on my menu start / all programs. The Microsoft Knowledge base offers a solution type gpedit.msc in the run, but the system does not find this file.

  Hi EPLER, MICHAELC

  (1) do you use the computer as an administrator?

  (2) since when are you facing this problem?

  (3) remember to make changes?

  (4) are you referring to the following Microsoft article?
  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  It is sufficient to indicate the complete error message you receive.

  You can follow all the steps mentioned in the article (KB316524) above that solves this problem.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Message error "Windows could not start the Windows Firewall on the Local computer.

  I was check the status of the Windows Firewall and I got a message saying "update your firewall settings" and "use recommended settings" option. However, when I click on this option, my cursor is occupied for a while, but nothing happens then.

  I tried from Windows Firewall in the list of Services, and I got this error: ' Windows has no start Windows Firewall on the Local computer. " For more information, see the system event log. If he is a non-Microsoft service, contact the service vendor and refer to service 13-specific error code. »

  I also tried to fix problems using Windows Fix - It, but these two problems were still attached. Help, please.

  Thank you.

  If you have a malware infection in not too distant past, this could be a relic.

  First, run Disk Cleanup to rid the system of temporary Internet files. These can seriously slow down a Malwarebytes scan.

  Then run Malwarebytes.

  http://www.Malwarebytes.org/

  Time of installation, make sure that you do not check the box to install the trial PRO version...

  How to use Malwarebytes

  http://www.bleepingcomputer.com/virus-removal/how-to-use-Malwarebytes-anti-malware-tutorial

  Follow-up to the ADW cleaner...

  http://www.bleepingcomputer.com/download/adwcleaner/

  Do NOT click on the GREEN download button because it will bring only sadness. Use the right BLUE button below.

  When you are satisfied that there is nothing wrong in the system, re-run Windows patches...

• How to install Windows USB on the Satellite L50D.-c 10.

  How to install windows 10 usb?, model L50D-C

  https://www.YouTube.com/watch?v=psPWQy3-5B0

  Might help u

• How to install windows xp on the computer on which windows me

  How to install windows xp on the computer on which windows me

  • Please see: Clean install Windows XP

• How to configure Windows to allow the parameters and software downloads to appear in system and standard user administrator?

  I HAD TO REINSTALL WINDOWS VISTA (SERVICE PACK 2) DUE TO A TROJAN HORSE THAT ATTACKED MY SYSTEM. I USED THE SUPPLIED RECOVERY DISCS SET WITH MY COMPUTER BECAUSE THE SOFTWARE HAS BEEN PRE-LOADED AND I HAVE NOT RECEIVED SOFTWARE FACTORY. WHEN I WAS SETTING UP USER ACCOUNTS, I CREATED THE ACCOUNT TO ADMINISTRATOR (WITH PASSWORD) AND A STANDARD USER ACCOUNT. WHEN I CHANGE THE SETTINGS IN MY COMPUTER IN EACH ACCOUNT, IT DOES NOT APPEAR THERE EITHER ACCOUNT. I DO CHANGES IN PARAMETERS OF EACH ACCOUNT INDIVIDUALLY. CAN I SET UP SO THAT WHEN I CHANGE THE SETTINGS, IT WILL DO THAT IN THE TWO ACCOUNTS? THANK YOU FOR YOUR HELP.

  original title; HOW TO CONFIGURE WINDOWS TO ALLOW THE SETTINGS AND SOFTWARE DOWNLOADS APPEAR IN ADMIN SYSTEM AND STANDARD USER?

  Most PC manufacturers who don't give you the disks give you a partition on your hard drive that contains the images of the disks so that you can burn yourself.  You should check out.

  When you say "change settings in both accounts' exactly what are the parameters what do you mean?  It is normal that many Windows settings to be on a per user basis.  For example. the desktop background is a 'definition' which is completely independent for each user.  You cannot set up a wallpaper for a user and hope that it displays desktop of another user.

• How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  * Original title: windows 7 download

  I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  It has probably comes with Windows 7 Professional 64 bit.

  You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  You can also use Windows 10 too as you have the right to it as a free upgrade:

  • How to download official Windows 10 ISO files
  • How to: perform a clean installation of Windows 10
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• can not turn on power windows firewall after the expiry of pre-installed McAfee

  Hi, I can't turn on the power windows firewall after the expiry of pre-installed McAfee, first issue of w / this time.

  New pc, Lenovo Win 7 Professional.

  Thank you; Ricky

  Did you uninstall McAfee?  If not do it first and then try to use the windows firewall.
  If still a problem, run the McAfee available here - cleaning tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

• How to uninstall Windows 7 from the recovery disk?

  By mistake, I installed Windows 7 on the recovery disk. I have only windows 7 installed on my Dell Inspiron. However, it is now a multi-boot, as Windows 7 is stored on the operating system and the recovery drive. How delete/uninstall Windows 7 from the recovery drive (more free space on it is exhausted). I already tried to 'Format' and 'Remove the Volume' in the disk management page, but the options are grayed out and I can't access it.

  It's probably that you managed to install on the Dell recovery disk victory because it would be too small.

  Open the recovery partition in Explorer to view the files.

  Use msconfig to remove incorrect boot entry

• I got the flashplayer for some time - I need to know how to enable adobe to install the latest update?

  I had for some time adobe flash player - I need to know how to enable adobe to install the latest update?

  the version is 21.0.0

  browser - safari

  Mac OS x

• My battery is currently not defined charges to 80% and it is constantly in charge up to 100%. I want to free up to 80%. How can I change this? my laptop is Sony Vaio.

  My battery is currently not defined charges to 80% and it is constantly in charge up to 100%. I want to free up to 80%. How can I change this? my laptop is Sony Vaio.

  Hello

  Why do you do this? Most recent type lithum batteries must be fully charged that Sony has
  implemented.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  ====================================================================

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With
  systems today, the premiums is not a problem.
  
  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I fix runtime error: PROGRAM C:\PROGRAM Sony VAIO Gate\VAIO Gate.exe

  How can I fix runtime error: PROGRAM C:\PROGRAM Sony VAIO Gate\VAIO Gate.exe because of this my sometimes unable start system error & it takes a long time to start.

  Hi Shubham,

  Thanks for the post.

  Try the following steps:

  http://support.Microsoft.com/kb/929135

  If the problem persists, reinstall VAIO Gate:

  How do I reinstall applications packaged (https://us.en.kb.sony.com/app/answers/detail/a_id/32093/c/65%2C66/kw/32093)

  Enter the model # to locate VAIO Gate and its update:

  Drivers page

  Please indicate the solution as accepted, if you find this information useful.

  Kind regards

  Tony.