How to erase internet user/registration profiles on Win XP?

Similar Questions

• How to use 3 users on the same win XP VM, but each user has his own office.

  Hello world

  I'm a student and my friend, we have a problem on our vmware project...

  WE WANT to THE LOG IN VCENTER WITH 3 OTHER USER (the user are defined in Active directory) AND EACH USER MUST LOG on to THE SAME VM AND BEING ABLE TO HAVE THEIR OWN OFFICE...

  our teacher said that it is a feature of vcenter...

  We have an esxi and vcenter on that apparatus operation, we also have our active directory and windows xp for users...

  We are looking for a solution for 3 days now and we're short on coffee so please help us ^^

  Thank you and have a nice day

  Hugo

  If you ask if there are three HARD drives on a VM xp, yes you can have.

  But if you ask if you have three HARD drives and which will have to allow users to connect at the same time it is not possible as stated above.

• How were you completely delete a / profile under vista user account?

  How were you completely delete a / profile under vista user account?

  I have a virus on a different user profile, and I just want to remove this profile.

  (ON VISTA)

  Hello

  How to remove a Vista user account - even if you do this, you should check as well
  for malware.
  http://www.Vistax64.com/tutorials/93026-user-account-delete.html

  Even if you do not see the virus on your other profiles, it might be in areas that will subsequently
  cause problems in the other profiles. It would be preferable to eliminate malware from the machine
  that can be done without using the profile infected from an ADMIN account.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

• How to monitor the activities of internet users without using third-party software. We have some 60 windows domain user

  Hi all

  We have 60 knots which is connected with the windows domain. How to monitor the activities of internet users via the windows server

  without third-party software.

  Thanks in advance

  Alam

  Hello

  The business support, you can find forums on TechNet, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to block internet access to users on the local computer. The machine is sub domain control.

  How to block internet access to users on the local computer and the machine is in sub domain control.

  Hello

  Thanks for posting your query in Microsoft Community.

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• How to apply internet traffic in VPN tunnel users

  Hello

  Perhaps it is a simple matter to most of you, but it confuses me right now.

  Here's my situation:

  home - internet - ASA 5510 users - CORP LAN

  We have remote Ipsec VPN and anyconnect VPN, I think that the solution must work on two of them.

  My question is: "how to apply internet traffic user home to the VPN tunnel?

  We have "split tunnel" to only"'interesting traffic' VPN tunnel access LAN CORP.

  but now I need apply all traffic (internet + CORP LAN) user through VPN tunnel passes.

  so far, I did what I know:

  1. remove the "split tunnle" group policy

  2. the address in "remote user VPN address pool" are perhaps NAT/PAT travers ASA5510

  but I don't get why it doesn't work.

  all suggestions are appreciate!

  Thank you!

  A few things to configure:

  (1) Split tunnel policy to be passed under split in tunnelall tunnel

  (2) configure NAT on the external interface to PAT to the same global address.

  (3) configure "allowed same-security-traffic intra-interface" so that the tunnel VPN for Internet traffic can make a u-turn.

  Please share the current configuration if the foregoing still does not solve the problem. Thank you.

• How to limit Ganymede user to logon to another device of base on the location profile group

  Does anyboby knows how to prevent a user from Ganymede to logon to another device? Our company has a manufacturing in many place around the world, and we wanted to keep all of our engineers based on their geographic location. For example engineers networks base on Asia is limited to access all devices located in the United States needs but we engineers access to all devices that are installed in different locations. I am using Cisco Secure ACS 5.3 and I am not able to do this. The test account I created which is belong to a specific group (i.e. ASIA) can connect to a set of devices that are located in the United States with read access but do not write access because of the restriction that I created. All I wanted is for this test user to block his access to these devices located in the United States.

  Well, lets assume that you have created two American and Asian communities

  you have defined two clients AAA US1 and Asia 1

  also, you have two identity of the groups USgroup and Asiagroup

  (1) If a user tries to access the peripheral USgroup Asia should be rejected

  (2) If a user attempts to access US Asiagroup device should be rejected as well

  other access

  If you need to customize the authorization policy in respect of the device admin access service

  to register the identity group and NDG:location where you can put in the result of the conditions

  What shell never set of profile or the command you want.

  Rule 1: Usgroup NDG:location y US grnat access to profiles of shell and command the necessary value

  Rule 2: Asiagroup NDG:location we Asia grant access to profiles of shell and set of commands necessary

  default: deny access

  ----------------------------------------------------------------------

  Please ensure good answers to rate

• How to get current user profile on demand connection.

  Hi, guys
  
  I have a question.
  
  Currently, we have used the java portlet weblogic, my question is how to get the user profile currently.
  
  Like this:
  @RequestMapping
  public String listEventLogsList (RenderRequest request, response, model ModelMap RenderResponse) {}
  ....
  Download the profile of the user of the application.
  }
  
  is a tool util class can hep complete us this work.
  
  Thank you.

  Hello
  Use getUserPrincipal () .getName () (assuming always connected otherwise that you must check for null)
  ProfileWrapper pw = ProfileFactory.getProfile (userName, null);

  Theres also a way to get the HttpServletRequest to the rendering application, google, even if I do not remember the hand, then you can use the methods of accepting the request

  concerning
  Deepak

• If I create a restore disc, will be if give me a copy of my registration, profiles, retore point, etc?

  Original title:

  Backup files

  I had a problem connecting with my profile today, get it fixed. It made me think what are important files which should I back up? If I create a restore disc, will be if give me a copy of my registration, profiles, retore point, etc? I looked online and found information about creating a backup, but lets say a windows file gets corrupted, or my user account, etc. Is there a way I can get this saved?

  My data is backed up using Mozy, so I'm not worried about the loss of data. Want just a way to easily get Windows operational return. Thank you.

  Hello

  BTW, you can use the system restore which records these parameters (and register):

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ===================

  A utility to help you.

  ShadowExplorer - free - allows you to browse the shadow copies created by windows
  Vista/7 Volume Shadow Copy Service. It is specially thought for users of the Home editions,
  who have not access to the default shadow copy, but it is also useful for users of the
  other editions.
  http://www.ShadowExplorer.com/

  Rob - SpiritX

• How to remove a user name from the logon screen?

  Hi all

  I have an annoying problem and do not know how to solve.

  What happened is that used to use my laptop for the log-in het Skype account my ex-girlfriend. But in the login screen continues to display his name as mine always does.

  I used different registry cleaners and uninstalled and reinstalled Skype and had no results.

  How can I remove users on the logon screen?

  Thanks for all the help.

  Basically, you need to remove the folder of the account. I think the second part of this FAQ Help: https://support.skype.com/en-gb/faq/FA142/How-do-I-delete-my-profile-or-Skype-Name
  
  André

  If the answer was helpful, please mark with congratulations , and if the problem is resolved you can mark it with solution. This will help other users found this answer more easily. Thanks in advance!

• I lost the user's profile after the execution of an update of the Microsoft Vista

  After an update from microsoft on December 18, my user profile on the computer has been lost.

  It says there was an error loading the user's profile, and that any changes made to the computer now will be lost once the computer is offline.
  For me it of more my ruined A £499 of the cell value and not good for me.

  I'm not a computer genius and don't know what I'm doing.

  Can someone tell me please know what Microsofts update to vista did and how to fix it please.

  > Can someone please advise me as to what Microsoft s for vista update did and how to fix it please.

  I think THAT the guys at Microsoft would be able to say what did the Vista update
  To be honest I m running Vista updates too, but my computer and all my profiles are not affected

  However, what you could do is to put the OS up to this early time using Vista's system restore.
  Perhaps this will help you resolve the issue.

  If not, then maybe you can manually configure your user profile

• Why our local DNS server, discount Internet user if the user insert new internet address?

  We have a local DNS server that has a strange problem. If a user insert new internet address DNS will cut this internet user. So every time that the user want to insert the new internet address that he must fix his connection and then refresh the browser to display the page.

  How can I fix this error?

  Hi Saman,
  first things first... more information is needed to correctly diagnose your problem.
  When you post a question please include at least the system operation, error message, and what happens when the issue appears.
  Second, server or business systems problems most will be better suited to Microsoft's Technet forum.
  Try this link below for search/post:
  http://social.technet.Microsoft.com/search/en-us/?query=DNS%20Server&refinement=112&AC=3
  B Eddie

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• How to move items from one profile to a local storage

  original title: move items from one profile to a local storage

  How to move items from one profile to a local storage to free up space under this profile?

  Hi MartySlaught,

  ·         You want to move the files in your user account on a different medium (external hard drive)?

  If so, you can do this only for your personal files. You can refer to the following.

  a. make sure that your external USB hard drive or a USB flash drive is connected to your computer.

  b. open the directory on your computer where are the files you want to transfer. Press 'Ctrl' key and click each file you want to transfer.

  c. click on the option "Move selected files" on the left side of the window. Then select the external USB hard disk or USB flash drive. The files will be moved from the computer to the external hard drive.

  See also:

  Microsoft Windows XP - move a file or folder

  Microsoft Windows XP - move files by dragging

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW