How to Exchange card WLAN on Satellite Pro M10?

Similar Questions

• Card problem its satellite Pro M10

  I ve a problem with my card in Tosh.Sat.Pro M10 SoundMax.
  After a complete restoration with original General card her I ve were ok for 1 day. But then he started with small openings during playback of music or something else. Now I hear much slower music or noise and rustle. Sometimes the Application process which plays music will be frozen and cannot be killed by the the Task Manager or any other tool like pskill or something.

  After installation of the real driver on the toshiba site, sound works for 20 minutes that a problem and then back again. Sometimes after the restart when the problem occurred in the Device Manager, the sound card is declared as disabled.

  the system hangs when you try to test the card its Windows XP.

  Help, please. Is this a hardware problem?

  Hello

  As Feliks said, try to recover the operating system with the recovery CD supplied and don't install any software 3rd as some of the codex or music players. If the problem persists, it could be a malfunction of the equipment.

  Good bye

• How to enable the WLAN on Satellite Pro L850?

  We have installed a white Windows 7 installation on our L850, adding the drivers. We find him the Fn - F12 (or F12 depending on the configuration of the BIOS) don't turn on Bluetooth and Wi - Fi and turns off.

  Can someone give advice on how I can get the Fn - F12 to toggle Wi - Fi as well.

  It's the source of headaches on our school computers

  Thank you guys

  Is WLAN driver correctly installed?
  Wireless network card is listed in the Device Manager?

  Otherwise go to Toshiba WLAN and download the latest driver for some WLAN cards.
  http://APS2.toshiba-tro.de/WLAN/

  Please send comments.

• Need of new graphics card for my Satellite Pro M10

  Hello

  I guess that my graphics card is broken because the quality of the screen is bad a flickering with green stripes. Almost impossible to read what is on display. In the list of devices, the graphics card is marked with the yellow triangle symbol.

  Its seems not to be a driver issue because it's the same thing at the start when you get into the bios (before windows xp starts).

  Is it possible to change the graphics card myself? I know, could be difficult, but I guess that I am capable of killing.
  But what card I can use? Now, it's a GeForce4 Go 410.
  Can I take a better as long as it's the same size and the need for cooling than the former? How do you know that you can adapt and where to buy?

  I hope someone can help.

  Thanking you in advance.

  Andreas

  Hello

  Unfortunately, you cannot swap the graphics card because it s soldered on the main PCB (printed circuit board). If theres anything with Exchange of DIY. You will need to swap the whole motherboard to fix this error.
  Then if you still have warranty then bring your machine in an ASP. You can also bring your machine to an ASP when not in warranty, but you will be charged for the Exchange/repair of the motherboard and in your case, it could cost about 300-$500 (I'm just guessing, it can be much more expensive..)

  So if you really want a machine to work again then check this link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Looking for video card for my Satellite Pro M10

  I can't find a replacement of the video card for my M10, I deleted and reinstalled the card and the updated drivers, but the problem persists.

  Can anyone offer a cotact for a card or someone at - it or know of one for sale new or used? I'm in New Zealand

  Please don t mix the laptop and desktop PC technology.
  The mobile graphics card can be upgraded or removed as the on the desktop PC.

  The replacement of the graphics card is not possible.

  In this case, the entire motherboard must be replaced!

• Unable to connect to internet wireless - WLAN card non - Satellite Pro M10

  Hi, I just got a second hand toshiba satellite pro M10 and I just of him relandscaped and put windows xp home edition on it. What I would like to be able to do is to connect to my network wireless of families so that I can get rid of all the cables on the floor. My laptop seems to think that there is no wireless card installed well. Now, I had the same problem with the lan cable, but I went on the tosibas Web site and downloaded a patch and update the driver in Device Manager. I am not able to do it with the wireless as there are no drivers to download for it and there is apparently no for this device in the Device Manager. Could someone please help me and tell me what to do and how I can download a patch or fix the problem. Thank you, Andrew Reid

  Hello

  first of all, have you installed the drivers according to the installation instructions?
  If this is not the case, this can cause problems.

  When you see the wireless card works correctly in the Device Manager, check if you get a signal of any router. If there is nothing the card WLAN is defective, or the router works with another standard (a, b, g).

  Good bye

• Graphics Intel card replacement on Satellite Pro M70

  Hello

  Does anyone know how to replace the graphics card Intel in this model? I would like to play Battlefield 2, but I can't because the graphics card is good enough.

  Thank you
  Toby

  Please see this forum topic about changing the graphics card on the Satellite Pro M70
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15762

  My comment: it's not possible to upgrade the graphics card

• How to clean the cooling on Satellite Pro 6100 module?

  Since my laptop for some reason stop (explained in my last post), I read messages from others who are similar to my problem and some of the responses that they was that they must clean the cooling with a vacuum (vacuum) module.

  So I was wondering how to clean it and where is it? (I m not an expert on computers)

  Hello
  I am not owner of a Satellite Pro 6100 but I saw this laptop on several pictures and it seems that the fans are placed at the rear near the CC.
  If you try to vacuum dust and debris from these grids of fans.

  I found also found a very detailed instruction how to remove and open the Satellite Pro 6100. http://www.irisvista.com/tech/laptops/Toshiba6100/Toshiba_Satellite_Pro6100_dismantle_1.htm

  BUT if you have no experience, you must do it yourself. The best way to ask someone who knows what to do!

• Is it possible to replace the graphics card on my Satellite Pro?

  Is it possible to replace the graphics card on my Satellite Pro?
  I need to so that it can run CAD software. Anyone know if it is possible, or it is soldered to the motherboard :(

  No, it is not possible given that the graphics chips more are part of the motherboard.
  In some cases, it of possible to remove the graphics chip on the motherboard, but in this case that it must always use the same GPU for this motherboard.

• How to turn on WLAN on Satellite A200 - 1 M 8 with Vista operating system

  How to enable the WLAN on Satellite A200 - 1 M 8 with Vista OS, FN + 8 does not work

  Make sure you wireless switch on the side of the unit is on. Click Start-online panel-online network and sharing Center => manage networks wireless (on the left) click the little more beside the word 'Add' => select 'connect to a network that is in range of this computer' => you will see a list of networks that are in range so, select the one you want and enter the encryption key if it is a secure network

• How to remove the password of BIOS on Satellite Pro M10

  Hi guys,.

  I searched all over the web to find an answer, but has no success. So I really hope one of you can help out me.

  I have a very old Toshiba Satellite Pro M10 with 512 MB in it. The laptop is protected by a BIOS password that I know. However, the problem is that I want to remove the password of BIOS completely. I know this isn't a big deal, but I find it annoying to type the BIOS password over and over again. Mostly because I am preparing this old lady for my oldest daughter. Furthermore, I just installed Windows 7 and it works well, but I have all the original software Toshiba, for example the HW configuration utility. I expect the download somewhere on the net, but unfortunately this is not as simple as that.

  Any help is appreciated!

  Thank you

  Jeroen

  Hey Buddy,

  It is easy to remove the BIOS password. Follow the instructions posted by Al - eX.
  As new password just enter anything and then the password is removed.

  I m wondering that you have installed Windows 7 on Satellite Pro M10. It is a very old book, and in my opinion Windows XP would be the best choice.
  In addition there are no downloads available for this model and Windows 7 on Toshiba page

• Satellite Pro M10 HDD Upgrade - how will work?

  Hello

  I have a question I have a Satellite Pro M10 (PS630E-G207W-GR) and I want to change the hard drive to a 120 GB + HARD drive so I called the Supporthotline because I need the Windows CD and they mean that would work with a new HARD drive, because the Bios does not the new HARD drive, and he was not told why. Now the question is, if it works with an update of the bios, or if maybe there is already a person here with a working 100 GB + HDD from the laptop.

  and sorry for my very bad English

  Hello

  If you are not satisfied with the answers provided by the support, you can also try to communicate with several independent services for hardware upgrade. As far as I know, they are able to manipulate the BIOS to work with hard disks are not supported. Maybe this solution is for you.

  At least on this forum, you can find topics where users of laptops repost on an improvement of HARD drive (more than 100 GB) successfully with older models as your M10. You can order 120 GB of HARD drive and try to use it. If this does not work you can send it back. To do this, you have about 14 days. Test it!

• Satellite Pro M10 attempted to upgrade processor

  Hello

  I tried to upgrade cpu original 400 fsb 1.4 mhz centrino centrino 1.6 mhz 1 MB cache 400 fsb cache 2 MB (SL7EG), it works but only the minimum frequency (+-670 Mhz), it remains each time to the lowest frequency even if a lot of work is invited to the cpu (tried a lot of cpu stress tools).

  I really don' t know how solve this problem... can someone help me please?

  Bios version 1.50, version of the firmware 83,72, 23/05/2003 date of the bios.
  Thanks for advantage

  NB: only in documents from toshiba, the CPU seems to be fully compatible with Satellite PRO M10

  Hey Buddy,

  Just a quick question: you know that upgrading the CPU is not supported by Toshiba?
  With other words, it means that no one can tell if another CPU works correctly, and if you can use the higher speed.

  I guess if you can use t as the higher speed, the CPU is not taken in charge and that s a limitation of the card motherboard/BIOS.

• Satellite Pro M10 - horizontal lines on the screen in different areas

  Hi all

  I hope someone can help.
  My Satellite Pro M10 seems to suffer a display problem where I have horizontal lines on the screen in different areas.
  It would be well for 10 minutes and when the laptop seems to warm up this problem begins, then shortly after
  The laptop would crash and enter in a resolution of 800 x 600 16 colors or sometimes freeze.

  Graphic drivers have been resettled, and even a new installation of Windows XP from the recovery CD does not help.
  A reboot doesn't solve what the same thing happens again and after one minute of use, so I thought it might be a video or cooling problem.
  I changed the video card I had a spare part of my last motherboard hoping this would solve the problems, but the problem persists.
  Perhaps a cooling problem? Or problems of motherboard?
  The motherboard has been replaced twice, hoping that this isn't another mobo problem.

  Any advice would be great.

  Thank you.

  Hello

  I m not 100% sure but to me it looks a bit like an overheating problem
  Maybe the graphics card may not be properly cooled after a certain period of time and that's why these strange horizontal lines appear on the screen.

  I wonder how you were able to replace the graphics chip on the motherboard?  :|
  If I m not wrong not the chip is fixed and the replacement is very easy and difficult

  It of always difficult to say what's maybe wrong without running several diagnostic tests in most cases this problem may be related to the defective chip or motherboard and so the following should be checked

  Sorry, but that's all I can suggest.

  Best regards from my friend

• Satellite Pro M10: Cannot get a resolution of 1680 x 1050 px

  Hello

  Recently I have bougth a screen Dell 2005FPW with a native resolution of 1680 x 1050.
  With the standarddrivers of the geforce4 420 go in my satellite pro m10, I can't get this resolution (max 1280 x 1024).
  How can I solve this problem and work to the full capacity of my screen?

  Hello Jorré

  Sorry, but I don't see any problem. The fact is that there is a restriction of the graphics card and if the max resolution is 1280 x 1024 you cannot set upward for external LCD.

  Maybe you can try with something like this http://eshop.macsales.com/item/Viewsonic/VTBOOK/

  Good bye