How to finalize my dvd + r that was burned with a non-divx file to be compatible with my magnavox dvd player? Windows XP DVD + R finalized Dixv?

Similar Questions

• HP Pavilion dv6-6c29wm recover disc that was made with HP recovery Manager

  My HP Pavilion dv6-6c29wm recover disc that was made with HP recovery Manager

  Windows 7 64 - Bit on 650 GB of disk.

  Error: "the system support does not support this computer. You are not able to restore the system with the media. »

  I'm about to order the recovery disks from HP and with a bit of luck, being able to bring this notebook to conditioning factory with all the correct partitions and sizes, after that I have format the hard drive.

  Yes, our recovery disks will return your device to factory State. All the software that came with the unit will be resettled. What you have added, you have to reinstall.

• I can't delete a folder that was created when I downloaded DIVX. Message I get is "Destination access folder denied" any suggestions?

  I can't delete a folder that was created when I downloaded DIVX. Message I get is "Destination access folder denied" any suggestions?

  Try to use Unlocker to:http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml this programs often works when the normal functions of remove Vista not work correctly.

  If this does not work, you need to change the permissions and ownership on the file in order to have all the rights and the property (even on the inherited rights).  Then try Unlocker.  Here's the information to help you do.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning

• New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  VAIO laptop

  New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  To restore the software preinstalled on the computer, or to install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

  Sony support:
  http://eSupport.Sony.com/

• How I 'Finalize' a DVD-R disc so it can be converted to video?

  I have a Sony Handycam - (Carl Zeiss Optimal Zoom) that uses DVD-R mini disks. Recently, I sent filmed basketball to an organization that sent the following request, but I don't see an option in one of my menus camcorder to "finalize".

  "When the DVD is not finalized it means that the images intended to be on the DVD was not completely copied and so the DVD seems to be empty when played."

  Once you have the DVD in the camcorder, you need to finalize the images through the camcorder. This process is different depending on the camcorder, you have, but it should be an option in the section of the menu once the DVD in the camera. »

  What is the model of your camcorder?  I guess you don't see not finalize if you press P-MENU on the touch screen.  There is a video on how to finalize a disc-

  http://eSupport.Sony.com/us/Perl/tutorial-display.pl?tut_id=432&MDL=DCRDVD803

  - but may not be useful if you do not see an option Finalize after touch P-MENU on the touch screen.  If you will provide a model number, I'll see what I can find that will help you.

• How to reinstall Norton Internet Security that was originally installed

  Hello!
  I have a Satellite M40-148 and I need to reinstall Norton Internet Security that was installed initially. I have the DVD-rom of recovery of the product, the additional software CD and I still have the TOOLCD directory, but I can't find the application of Norton.
  Can someone tell me how to?
  Best regards and thanks - Steen

  Hi Steen,

  If your copy of NIS was originally installed when you got your laptop then it will probably have been included on the DVD of recovery in which case there is no way in which you can extract it without performing a reinstall full of your operating system.

  In my case, NIS was delivered on a CD separate provided by people who I bought the laptop so I can re - install from there without a full system restore.

  You could, of course, back up your data and then re - build your original recovery DVD system (just finished it on my A30), and this will give you a good clean system without any of the inevitable clutter that can accumulate.

  HTH

• Major newbie here - problems video editing on dvd that was burned to a dvd recorder

  First of all, let me say that I know ZERO about Premiere Pro or video editing. The first time I opened the program was last week and it took me about an hour to find a way to establish a chart / title of someone on a video given to me.

  It's the second time I open the program, and I don't know what to do.

  First: I'm on CC 2015 and have a Mac running OS X 10.10.4.

  Now my problem: I was given a DVD that someone burned for a one hour event registration. When I insert the dvd on my computer it DVD Player automatically opens and will play the event to one hour in full transparency.

  
  

  When I opened the DVD content, files is divided as follows:

  -VIDEO_TS. BUP

  -VIDEO_TS. IFO

  -VIDEO_TS. VOB

  -VTS_01_0.BUP

  -VTS_01_0.IFO

  -VTS_01_1.VOB

  -VTS_01_2.VOB

  -VTS_01_3.VOB

  -VTS_01_4.VOB

  -VTS_01_5.VOB

  I can import the five videos in the project and put one after the other in the right editing box where the video clips all are, but the transition from one clip to another is very glitchy.

  All I'm trying to do is finish the video for an hour or final clip about 45 seconds more earlier than that it actually ends because they have managed to save on another event, so the tail which appears at the end of this video. Any ideas on how I can extract the entire video, a time of DVD or make the transition from five clips as transparent as it is when I just read the DVD in a DVD player and don't try and change it?

  Thanks for any info!

  1st, CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 can help

  2nd, directly edit a VOB... or ripping a VOB to be changed with a score of Jim Simon http://forums.adobe.com/thread/1322647

• How to restore a security entrancecode that was not installed by updating to ios10?

  Work with the 5s iphone I recently could update to ios10. I did it during the evening. In the morning, I was told the update required an entrycode that was not installed.

  I use an entrycode before this and the same works after that.

  No longer is my ability to import on my Imac out of the photo on my iphone, it says in Iphoto: cannot import as device is held by entrancecode, you need to unlock the device to import the photo.

  My unlock does not work. I tried to connect to itunes, tried to reset, but so far nothing works.

  What can I do?

  Hello

  Go to settings touch id & password if you can't do this support.apple.com contact

  See you soon

  Brian

• How to remove a domain controller that was removed from the Internet works but not demoted

  How to remove a domain controller that has been remove from the Internet works but not demoted

  got two domain controllers and been deleted but not retrograde

  can help pls

  Hello

  Your Windows is better suited for the directory on TechNet Services. You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-us/winserverDS/threads

  I hope this helps.

• How to include a .lvlib in a generation that was created using a custom .dll file

  I am trying to build an executable in LV2010 which uses a .lvlib which was created using a Keyence .dll file. I added the .lvlib to the source as "Still included" files and I also added all the files "Always included." library .vi I always get the error message saying "Lack the external function" during the execution of the program. The executable seems to open properly on the development computer, but not on a secondary computer. Any ideas?

  Hi Harris,

  I would like to clarify a few points.

  -With all these configurations that you described above, the executable file worked properly on the development computer?

  -L'application works correctly on the development computer outside a build specification, just running in LabVIEW?

  -Have you tried to deploy the executable on multiple computers, and you see the same error on every computer other than the development computer?

  -Is there a software that must be installed so that the TMIF.dll to work? This software is installed on the deployment computer?

  It seems that the DLL is included with success, but for some reason, the function appears as missing. Also, I noticed that the error message has a: C at the end of the message, which makes me wonder - is this a C DLL or a Windows DLL (.NET)?

• Could I get a free replacement for the phone that was diagnosed with the liquid damage clause?

  Hello

  It's Vincent of the India.

  My iPhone 5 exploded randomly while I was listening to music, about 2 weeks back. Don't turn on since.

  The inspection service center claimed to have found traces of liquids on "residents" of the device and thus were classified in accordance with the clause of liquid. I was asked to pay more than the price of the phone for placement.

  I understand that there is no free replacement phone or the motherboard, my question is how safe are that it is not a fault of Interior?

  The phone is 4 months warranty, purchased online. No physical damage. I have no reason to lie when I say that I don't 'accidentally' drop it in the water. Why can't they consider a real case? In addition, what might have caused the problem?

  Some experts of the forum online YouTube wrote this saying, "close the seat or the higher in the order." He has not just you being stuck with a defective product. Exactly how to do this, if I could?

  Everything what I'm trying to understand is why should it unlucky customers such as I have pay the price for something that I'm sure that's not a fault on my side? Should not be a system in place for situations like this?

  Other iPhone - official Apple Support repairs

  How much will cost to fix an iPhone 6 with water damage?

  more

  cost of water damaged iphone

• How to finalize a dvd?

  I recently burned movies on a dvd + r (which is the right type for my burner).  The movies play fine on my computer, but when I try to finalize through roxio it just keeps telling me to insert a write once dvd and it won't finalize for I can't play it on my TV.  Any ideas?  When I eject the dvd, it closes the session correctly.

  Hi larzzyboy and John.

  I read the explanation of the problem and I've been OutSite with the same thing myself. (DivX/XviD compatible) DVD player has not play recognized the DVD I burned just copy of Vista that closes only the sessiion and not the DVD.
  This question was not answered, is there a way to close the DVD (not the session) for devices other than computers can read the contents of the DVD? Is it possible at all without any third-party application? I think that if the DVD is full there will be done a DVD colsure, but what are the options for a no complete closure of DVD?

  =================================
  I am not convinced that the completion of the DVD is your difficulty
  but here is an article that explains how do...

  Windows Vista-
  Close or finalize a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/6ba29b2b-0804-44BA-B277-a64fc439c79c1033.mspx

  It may be a problem of confusion and I think that
  Since you say you used copy and paste to transfer your
  files on the DVD that you are using the Live File Format
  which may cause compatibility issues with the
  free permanent DVD player.

  If your DivX/Xvid videos and your player is DivX.
  Compatible XviD... it may be worth trying to follow the
  instructions in the following article to create a Data
  DVD. (if not... you will need to create a video DVD)

  Windows Vista-
  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
  (Follow the instructions under the heading: "to burn a disc using the ISO image format")

  Here's another useful link:

  Windows Vista burning disc:
  Frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/2fa35b0d-B280-4589-9805-55e753888f5c1033.mspx

  John Inzer - MS - MVP - digital media experience

• How can I find a program that was on my computer before and now its nott?

  I looked for the program in the start menu and windows Explorer. only place I found it was in the region of uninstaller in the control panel. In my view, what could of happened is it could have been deleted and sent to the trash to recycle but it has never been uninstalled. I WANT the program and use it then how do I reinstall or difficulty or something? anyone?

  Hello

  Was what progran? It's a stand-a-alone program or something that runs in another
  program as an add-in for IE or MS Office program?

  Start - type is to search for the name of the program and then look at the top of the list. If then there
  Tab right click - Properties - shortcuts will show where it is. Double-click on the program to
  the top of the list to run it.

  In addition to programs in other folders as user name most likely C:\User\Your is documents or
  downloads. It could be anywhere but.

  It is also possible that he was moving to your TEMP folders and it has since been removed and it must be
  re-installed.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to slow down a video that was taken by mistake in the time?

  A parent took a video of our daughters in marriage. He had by mistake this time.  He transferred on my IMac where it lies, and he returned to England. I also have it on my iPad 2. What is the best way to slow it down and is it possible to recover the sound. By executives, it's beautiful and I really wish it was for the bride and groom to keep.

  I would appreciate any advice.

  Thank you

  This could help you.

  How can I change a video of time on m Iphone 5 back at normal speed?

  Best,

  Al