iMovie got hung

Similar Questions

• Virtual MACHINE running on two hosts after hung vmotion

  Hello

  I started a VMotion of virtual machine by host A to host B. The request got hung at 65% for several hours. I restarted the VCenter service, registered to vsphere. The process was running is longer, but now the virtual machine appears on the Host A and host B.

  The Cluster-'Virtual Machine' tab displays the virtual machine and cycles between two hosts seconds couple?

  Anyone seen this before? How can I fix it? Thanks in advance!

  First of all, it's impossible.  A virtual machine cannot be in 2 places at once.  It's just in the transition.

  Secondly, vCenter manages the process but it doesn't actually do the vMotion, ESX hosts are.

  What is happening is life of the virtual machine on the host only until the end of the evolution towards the other host (somewhere around 97%) when the transfer is confirmed with the new host.

  Best thing to do is to restart the services of management on both hosts and see if that frees the vMotion.

• I was really hacked or blackmailed

  At the end of August in SM hotel in Las Vegas after having connected the local WiFi shortly my Macbook Air got hung with pop - up notice to immediately contact a number to phone for help. The popups were accompanied by piercing sound. OK, I contacted the phone number and said emphatically that my computer has been hacked I won't be blocked all access served Apple, etc. on the blacklist if I do not contact another phone number and get technical help and be charged as 249 dollars.  Yes, the Lady stands as a representative of Apple and wrote me another phone number. The issue proved to be TechCure company what rally scanned my computer and helped me to get rid of the problem after the withdrawal of the sum mentioned on my credit card that I said reluctantly. They got me electronically signed their bill through Docusign and I have my receipt of billing.

  For now I have no problem, but I'm hesitant and many think that the first phone number that appears on my screen after pirate did not belong to Apple. What should I do to and is it possible to find out the now and somehow to clarify the situation. What should I do to avoid and what are my other possible actions in this situation?

  To turn off the computer and wait until I can take it to the Apple store nearest? I'm sure now.

  Thank you

  Zilvinas

  Sorry, but you've been scammed by criminals. Because you allowed them access to your computer, the only method of 100% to be sure it is safe to use is to restore by using a backup prior to the crime. Contact your bank to determine measures to deal with the fraud.

  All this pop-up message, no matter how threatening they do believe, will always be a scam.

  Phony 'technical support' / 'ransomware' popups and web pages

• MacBook Pro 13 "Retina Display Usb Port does not... !!

  MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!

  Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support

• Music in gray: unavailable article - this article cannot be read

  I get this error that drives me crazy, I had a lot of songs greyed out with error point is not available. I tried to look for a solution and read some of the previous discussions, tried ALL of them, toggle iCloud library - Sign out/in - uncheck/check songs on iTunes... etc.

  Here is some information on my library:

  1. Subscribe to Apple's music, although these songs are NOT added to apple's music.
  2. Previous iTunes corresponds to the Subscriber.
  3. an iPhone, iPad and iMac are all connected to the same library and all have the same problem with the same songs.

  I don't know if my game expired subscription iTunes is causing these disorders because those songs were downloaded in fact when my subscription

  hoping to find a solution here-

  

  Well, I have a long history on this, more the solution.

  One day, I turn on my iPhone and make the message "Subscribe to Apple Music!" I was already registered, so I clicked on the link to see what is happening. Of course, he told me that I am already subscribed. I don't think anything of it until later, when I find most of my (mostly ripped to my own CD) music in gray and quotes from Abdulziz message "Item is not available."

  I tried to synchronize. It wouldn't sync. I tried to restore the software on my iPhone. Still wouldn't sync. So I called Apple and was on the phone with an advisor for six hours with a few short breaks. She could not solve it. A program sent to processes save to my computer and she said she would send to software engineers and get back to me within 48 hours. (She also promised a $100 gift certificate when it was resolved).

  No response after 48 hours. I called Apple and they said that engineers were still working on it. So I tried a few things myself. First I tried to use home sharing to move the music. No dice, the little circle hung up to half way through. I tried sharing the music of an old computer that I have and then sync to my iPhone. Shared music ok, but still a time would not synchronize (got hung up "Preparing to copy", or "Apply changes.")

  He told me that the problem was with my iPhone or my music library. I plugged a (very) old iPod touch on my computer to see if she could synchronize my iTunes library. Of course, in 10 minutes the entire library has been synchronized. Then I tried with my iPad. Yet once, 10 minutes it's done.

  So I plugged in my iPhone, click on "Software restore" and then "restore as new iPhone." I ALSO refused copy the settings (which was the difference in the first restoration). Then, as soon as the iPhone has been to respond to all, I synced my music successfully. I made 'Show Apple Music' has been extinguished, and that 'iCloud music' was leaving. I will never use either of these two monsters again! Then I finished the synchronization and added my apps back, and now everything works.

  Apple reports that software engineers are still working on it, even though I told them that it is resolved. They won't give me my $100 until engineers check.

  I'll subscribe to Spotify.

• Message deleted Ant support

  Here, if you want constructive messages, have this:

  I want to "install OS X Mavericks.app.

  Now, here's all the effort I went myself to try to achieve this goal:

  Called the phone support

  Got hung up.

  Third call, get this

  ************

  Impatient

  Not receive says that I can use internet recovery for the 10.9 on a SINGLE machine.

  Don't want to put my machine out of action while I wait for 10.9 to download from recovery, HOPE that it creates a complete recovery with 10.9 partition, then save this recovery partition.

  Post here if someone gets something is on file

  Post is deleted for having no no "constructive".

  I would have been perfectly happy with you guys delete my post if a copy of 10.9 mysteriously appeared in my purchases made on the app store, but no.

  It is a user support forum. You're not talking Apple here. If your post has violated the terms of use and brought to the attention of the hosts, they have deleted and sent you an email explaining why. This is not a place to get things on the Apple technical support case. They read here.

• complaint! who do you call?

  
  

  Unfortunately, I had the exact same problems as you also with the Pavilion I bought in August. I sent it through best buy using my guaranteed twice making now for three distinct problems. Now my speakers and cd player is broken and he keeps making updates with conduit to the Startup Repair failed and I'm unable to use it. I took it once more in the best buy and they said it's a lemon computer, but they cannot replace it because my warranty is through hp not them. The guy gave me the tech support number and was told to get a return authorization code that they wouldn't give me. Once I was talking to a manager who was very rude to off the bat, saying things like "listen here Hun" and telling me "you know nothing" I told him not to call me Hun and that there has been very little professional and rude. He went to talk to me whenever I talked and try to talk me down. Have enough of him not to listen to my problems that I hung up. He went to communicate with me by saying I was in bed and he had best buy on the phone in Plano Texas. First of all, I live in Illinois, so how they know what they told me to do. Then it wouldn't let me speak to tell him I called best buy and wouldn't let me tell him what they say or who it is that I went. Finally, I told you let me speak, please? And he kept you answer NO and have enough I asked her family name or employee number he refused both and got hung up. After all this he tried to call my phone once more! After dealing with enough contempt and harassment I did not. This delicious Manager is named David. Which I intend to report everything and I'm not let this problem with my computer until it gets. I'm a grad student on a full-time and need my computer and after spending hundreds of dollars on this brand new computer, I've been without it for a month already. I don't know how this company is still in business with their crappy computers and the horrible customer service! For my part will never buy from them again and everyone will say that I know what I've been through and how horrible, they are.

• the device is blocked

  Today, I bought sensa clip jam downloads my music, start to play and after a few seconds it is stuck and does not or anything... Please help!

  My Clip more got hung the other day. No amount of hold buttons and power on and off won't do it. I would try to start a file and it plays for 1 second (if any) and then stops. I finally fixed by formatting with edge - for some reason using Windows Media Player format is a not erase anything - then I reconfigure the synchronization and the return of the synchronized files and now it works again.

• Error Windows Update "0 on 3 updates" and 0%

  Original title: Windows Vista 30 39 updates and Widnows repeat Reboot

  I just got an automatic update started yesterday morning for Windows Vista which has been downloaded 39 updates.  He got hung up at 30 and I let it run all day.  Next was the computer so it go hard closed.  When turned back on, he showed a screen saying 0 out of 3 updates and 0%.  The computer keeps going into startup mode until it gets to the screen, and then it crashes, cycles and restarts more and more (more than 12 hours now).  The computer had no problem in operation before this update.  We cannot use the computer to do patch auto Web sites, either as a reuslt of the issue of restarting.  Anyone can help us fix?  Concerned we risk losing the photos stored on the pc.  Thank you!

  Hello

  See the following article:

  Important: Be sure to back up data before installing.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates:

  http://support.Microsoft.com/kb/949358

  Note: Follow the article mentioned above, regardless of the error message.

• Improvement of the reception of the WAP54G - advice needed

  Hi, I got hung a pair of units WAP54G, down the bridge of 100 meters from our House, in a holiday home.  One is connected to our router, the second is in the remote region, with a switch, then a third WAP54G distribute the signal in this remote area.

  This set works like a charm, BUT as it is a holiday home, we really need to put out of sight, bridge unit in the loft.  For the moment that it is in the direct line of sight to another unit, they are both on the window sills.  It's OK, but we'd like to get the second bridge out of sight to keep people from bothering with it.  I tried to put in the same position as on the windowsill, but in the loft, where he is originally of cladding (no brick etc, just wood and plastic), but he can't see the other device when it is in this position.

  Are there branches that I would be able to buy to give a better reception on this bridge? Ideally I'd like a pair of outdoor units I can screw to the wall on the respective buildings and then put a short cable (2-3metres) back inside the units.  This brings me to the second part of the query - boxes have two antennas on the back of them.  When I set up an antenna to gain high only just leave the second OEM stick to the back of the unit, or what? If these antennas be deployed as symmetrical pairs, or anything like that?

  I'm really happy for the operation of the system, on the whole, I want just a small extra reception!

  Thanks much for any reply and the advice on that.

  There are a number of commercially available external antennas. Anything with 7dbi or better should work fine. The connector is referred to as a RP - TNC

  Just mount the WAP54G near the antenna in order to reduce the length of antenna cable and mount the external antenna (outdoor) on the map of the barge and your outside.

  Get power and Ethernet for the WAP54G should be very simple.

  Concerning

  Fred

• Latitude 10 driver's cab and broken ST2E driver's cab.

  If I updated the driver for my Tablet 10 Latitude and ST2E on my MDT 2012, only to discover that the cab files are broken and fail to read. I tried with the A01 version without problems, but using this im missing a lot of drivers when I deploy. In society, I have been working in there is no problem with the normal laptop and office model, but these tablets is not working only not with the driver installs. Is it possible to get the driver cab files replaced by someone who works. Thank you very much.

  Thomas

  The ACR ST2E has been updated and published (link below).  ACR 10 Lat (ST2) got hung in the web promotion process that should be fixed soon.

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/4727.Latitude-10-st2e-Windows-8-driver-cab.aspx

• How can I get my USB printer doesn't work?

  I am trying to install a Dell 3000cn laser printer in my computer. He started by putting a virtual printer in my control panel that would not print it had nothing on the Hardware tab, under its properties and real hardware was still on the list of unknown devices in the bottom.  I removed both and removed the driver and tried to install the printer before I plugged it in which does the same thing as before so I went into the Device Manager and there was no printer listed. I've uninstalled the usb printer support and removed everything that are associated and tried. Now I get support of usb error has a printer driver problem.

  I tried to support the customer of Dell they got hung up, I tried Windows customer, they want me to pay.
  I've exhausted the research online and can't find 5 people with the same question online all back in 2008 to 2010 which was never resolved.

  How can I get the USB printer to work?

  Generally, printers do not appear in Device Manager.  You will see, however, registrations for "IEEE 1284.4 devices ' or ' IEEE 1284.4 compatible printer" in particular for HP printers.  It is possible that your Dell printer is really a re-badged HP.

  What exactly did you delete when you have uninstalled the "usb printer support '?

  Please provide the full error message text that you do when this error.

  Why do you think you had a 'virtual' printer is installed?

  Click Start, click devices and printers.  What are the items in the category 'printers and faxes '?

  Did you download the driver appropriate for your version of Windows (including 32-bit or 64 - bit) from here--> http://www.dell.com/support/home/us/en/04/product-support/product/dell-3000cn/drivers?

  Did you follow these installation instructions:

  Download

  1. click on the link download now to download the file.
  2. when the file download window appears, click Save to save the file to your hard drive.

  Extract the files
  1. navigate to the location where you downloaded the file, and then double-click the file to decompress the download package
  2. click on continue.
  3 specify the location where to unzip the files.
  4. click on the OK button to extract the files.
  Once the file extracts the message all files have been unzipped will appear.
  5. click on the OK button to exit the installation program.
  6. go to the Start button.
  7. go to settings, click Printers.
  8. Select Add a printer.
  9. follow the instructions to set up your printer.
  10. Select Have disk and point to the location where the drivers were extracted.

  Install the printer driver:

  1. install the printer driver using Add Printer method.
  2 follow the instructions that appear in the Add Printer Wizard dialog box to install the printer driver on your computer.

• Unable to install OS "From Scratch" on m8000?

  I bought this computer about 6 months ago with my parents, who took good care of her (the best that you can do with something like a computer). The HARD drive has failed and instead of fix it that they sold to me. I replaced the HARD drive and attempted to install several different versions of Windows. All Vista and higher versions to get to the configuration screen, but then say that a driver is necessary. I tried the 'trick' you place the USB (Yes, I installed the USB in this case) to another path, but it does not work.

  Windows 95, 98, NT, 2000 and XP all go beyond the 'preloaded' screen and then give a blue screen.

  Is the farthest I've gotten with Windows 7 Professional. I think that I managed to run Ubuntu from a flash drive, the primary NTFS HARD disk partition and try then to install Win7. He began to install but then got "hung up".

  It seems extremely odd that computers only I ALREADY had problems upgrading the OS on are the era Vista HP desktop computers and laptops. Interestingly, I can get LINUX (!) to install but not Windows. What happens here? These are all legitimately-owned facilities. Why are these HPs only computers that seem to completely exclude "redevelopment" a HARD drive "in white"?

  Must I keep even try or is there some hardware DRM BS that I just do not know? And what is with the RAID selection for this system?

  Thanks in advance for any help. I worked with HPs years and generally have good experiences with them. Until Vista +. What happened?!

  Hi LeptoManiac,

  After some but he hit me. HP not support Win 7 drivers for your PC. The Nvidia SATA driver is for Vista 64-bit. It may or may not work when installing Win 7.

  So, you will need to change the disk controller mode in the BIOS to IDE or AHCI.

  I also downloaded and extracted the installation package of HP sp37486 (Nvidia nForce Serial ATA Controller driver) for your PC from HP's Software and the location of the drivers and found the Vista 64 bit RAID (nvrd64.inf) .inf file.

  Given your situation, you might try using the .inf above during installation of Win 7 and see what happens. You can also try to install Win 7 by changing the mode of the controller BIOS.

  You have a safety net by purchasing available on computer surgeons 64 bit Vista HP recovery disks.

  You have options and should be able to get your PC, at minimun Win Vista, once again.

  This link directs you to the Nvidia GeForce 8200 for Win 7 64 bit driver options. Selections are unified drivers, and I have not tried to download everything or tried to extract the SATA driver. This is a large file and it is not possible to install the SATA driver by isolating all required (including the .inf file) files needed during the installation of Win 7.

  Happy computing!

  Jaco

• BitLocker me locked on Surface Pro 3; I have never set up BitLocker and key is not stored anywhere.

  Hello

  I have a Surface Pro 3, i5 256GB, bought in July 2014.

  I'm the ONLY person has ever touched my 3 Surface Pro.  Nobody else EVER used.  No administrator has already set up or tampered with it at all.  It's a personal computer (no admin would be by any company or organization in a way) and I'm the only person who used it.

  A week after starting, there's my 3 Surface Pro opens a blue screen that says unexpectedly "BitLocker: enter the recovery key to go again" and under the entry field says "to get that key, go to http://windows.microsoft.com/recoverykeyfaq.

  Please note: I am 10 000% CERTAIN that I have NEVER set up BitLocker on my computer.  No one else has.  I am sure of it.  Nobody has slyly had access to my computer.  I am sure of that too.

  But I went on that link above, connected to my account, and he told me that the BitLocker No. key has been saved to my account.  Again... no one else has no non-existent admin not a she and none 'another user' is, because I'm the only person who has used this computer.  Never.  Period.

  I called several times the support (and got hung up twice after an hour during a support call, by the way) and then to the Bank from Microsoft.  All members support confirmed that the 3 Surface Pro (unlike the Surface 2) don't automatically configures NOT BitLocker unless it is initialized by the user at any given time.  I am sure that some may be... I NEVER configure BitLocker on my drive.

  But, somehow, BitLocker encrypted to my reader, and there is no key.

  There is no way around it.  I can't get the key when he never existed.  I don't have not "forget" or "misplace" the BitLocker key, because I never put one in place.

  Hotline helpfully told me it must be a virus (please, seriously? Support always say that just to deny ANY responsibility for anything EVER?) or claims that I have configure BitLocker and forgotten (once again, please).

  I'm Livid.  I've lost the value of weeks of files.  How BitLocker can be put on my drive, and the key is not available through my account?

  Apparently, there is no way to get around, but I still think there must be something I can do.

  Someone at - it never had a similar problem, and if anyone has found a solution?  I need desperately to recover these files.  (Yes, I back up often, but he was still about 2 weeks, and not all received perfectly saved.)

  I would really appreciate if someone knows the tricks etc.

  Thanks in advance to anyone who can help!

  Dave

  hotel123123 GM

  Hello Dave,

  Thanks for posting your query on Microsoft Community forum.

  Unfortunately, my answers also support the statements you receive from Web sites or other technicians. Bit locker never ever get created and implemented by its own. Application of bitlocker on any system requires several step then only it gets implemented.

  BitLocker Drive encryption, help us protect all files stored on the drive Windows is installed on (operating system drive) and on data drives (for example, internal hard drives). We can use BitLocker to protect all files stored on removable data drives (such as external hard drives or USB flash drives).

  If it has been implemented and you do not know the key so there is no way to get the key and you may need to perform refresh, reset or reinstall windows.

  Important: Check out this article and refer to the warning section, you can copy the section warning like warning when you provide Refresh or reset in Windows 8 or 8.1 Windows

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be happy to help you.

  Kind regards

• Why my Adobe encoder stopped working?

  I've never had this problem before.  I was preparing a video to upload to YouTube, and when I exported the media as usual, the encoder opened as a blank page.  Also, before I exported that I saw a message that reads: 'Offline '.  I've never been before offline and don't even know how to do to work offline or even what it means, so I ignored it.

  Also, I came across another message (I don't even know how) that said "Adobe Encoder not available."  How is that possible?  Why something that I never use all of a sudden would not not available?  I was up all night and I'm tired and disappointed, as my video should have been live on Youtube.

  I've been up all night, if I forgot something important.  Initially, the encoder worked.  After about three hours, when it must have been finished, I checked on it and the encoder screen was red - always a bad sign something terrible has gone wrong, and he had.

  I went for the first and noticed that two clips that had been made had the red bar on them and a red logo in a foreign language.

  In any case, I was able to recover most of it by removing the clamps and make them, THEN when I exported the media once again, this is when the problem started and it don't work.

  I'd appreciate any help I can get.  Thank you.

  First of all, please report the exact version of Premiere Pro and SOUL - as shown in each box about the app, not just 'CC' or 'later'. In addition, please fill in the blanks normal on your computer (Mac/Win, OS version, etc.) and on the sequence & active in use, including when the clamps are stored (internal drive, external hard drive, network,...)

  If you have not already restarted your computer to it, it's the first thing to do - in the case of one of the several processes involved got hung.

  Other things to try:

  • under the general tab of the Preferences of SOUL dialog box, clear the option titled import sequences in native mode. Then export to first.
  • Encode "in-process" rather than using the SOUL. In the export settings dialog box, click export instead of the queue.
  • instead of export from the file > export > Media, drag the sequence from the project Panel to first in the queue of the TEA (or in a "Preset" in the built-in browser)
  • If the rendering engine (lower right corner of the queue of the AME) is set for GPU acceleration, upgrade the software only

  If you can find your way to the "Adobe Encoder is not available" message, please take a screenshot and post it here. I'm not familiar with this message.