How to find the approximate time of a timestamp array stamp
Hello
Someone you will suggest a logic to determine the index of a table of time stamp for a specified time stamp constant.
The table may not contain the exact time of seconds specified. It can be close to the time value.
(The time stamps can have approximately 10,000 items)
Thank you...
This is an approach that is nearest to the index with the timestamp:
Tags: NI Software
Similar Questions
-
How to find the last time that a user has performed an activity?
Hi guys,.
How to find on any sysdba user, when a user has been active last connection?
Suppose user SCOTT logon time is 10:00 and it is INACTIVE ( SELECT username, STATUS, SID, SERIAL # FROM V$ SESSION) @ 11:00
I want to know his last activity, as when he fired any principle request.
Thanks in advance
(Edited)
I found my solution:
SELECT username, terminal, SID, Serial #, status, SchemaName, to_char (LOGON_TIME, 'DD HH24') Logon_Time,.
Floor(last_call_et / 60) 'Ideal_Minutes', to_char (Sysdate, 'DD HH24') 'SYSDATE.
from v$ session by LAST_CALL_ET
When Status = 'INACTIVE ';
-
How to find the last time that the execution of the procedure and by whom?
Hi all
Can be found as the last run and the procedure by which the user in the dictionary of data or something else?
Thanks in advance.
At least that audit you, you can probably not.
If the goal is a particular stored procedure, you can maintain a work table so he can follow the execution time, audit owner etc.
Concerning
Biju
-
How to find the exact time backup runs
Hello
I would like to know the precise date (hour + minute) a backup has been performed.
For example, the output of the rman command: backup the database list.
show the time of accomplishment: May 8, 12. I would like to get the exact time.
Please advice.
Thank you...... BS Key Type LV Size Device Type Elapsed Time Completion Time ------- ---- -- ---------- ----------- ------------ --------------- 33627 Incr 1 256.00K SBT_TAPE 00:00:05 08-MAY-12 <<<<<<====== BP Key: 33994 Status: AVAILABLE Compressed: NO Tag: TAG20120507T230332 Handle: bzq1<bzq1_inc_889661:782699508:1>.dbf Media: List of Datafiles in backup set 33627 File LV Type Ckp SCN Ckp Time Name ---- -- ---- ---------- --------- ---- 279 1 Incr 8042759810240 08-MAY-12 /bzq1/oracalls_2011_data2/y0211pricing_internet04.dbf .....
Hello
What I understand is want to know that the execution time of the different backup sets you have. Now you see it -.
RMAN> list backup; using target database control file instead of recovery catalog List of Backup Sets =================== BS Key Type LV Size Device Type Elapsed Time Completion Time ------- ---- -- ---------- ----------- ------------ --------------- 33 Full 152.08M DISK 00:01:18 04-APR-12 BP Key: 33 Status: AVAILABLE Compressed: YES Tag: TAG20120404T221643
TO see the time in the time of accomplishment column format-
As I am on OS windows
D:\scripts>set nls_date_format=DD-MM-YY:HH24:MI:SS D:\scripts>rman target / RMAN> list backup; using target database control file instead of recovery catalog List of Backup Sets =================== BS Key Type LV Size Device Type Elapsed Time Completion Time ------- ---- -- ---------- ----------- ------------ ----------------- 33 Full 152.08M DISK 00:01:18 *04-04-12:22:18:01* BP Key: 33 Status: AVAILABLE Compressed: YES Tag: TAG20120404T221643
Anand
-
I said that there is an update of the firmware available for my 3 t time capsule. I get the message "an error occurred when downloading". How to find the problem? I have elcapitan 10.11.6 and capsule version 7.7.3
Try temporarily, connect your MacBook Pro to your Time Capsule using an Ethernet connection... If not already, then try downloading the firmware again.
-
How do you find the last time an old hotmail address was used... especially if you can't remember the exact password?
original title: old hotmail addressHow do you find the last time an old hotmail address was used... especially if you can't remember the exact password?
Good enough if you can't on the account and you can't prove it is yours in order to regain access (via password self-service reset, etc)-then you won't know anything about the account.
-
How to find the time to process a request?
IM using oracle express edition, can someone help me, how to find the time to process a request?Trace queries and tkprof the trace file generated.
http://download.Oracle.com/docs/CD/E11882_01/server.112/e16638/SQLTrace.htm#PFGRF01010 -
How to find the last update date, time and user of the file field peoplecode
How to find the last updated date time fields of peoplecode records?
Thank you.We can check the update date-time using the following query
SELECT LASTUPDDTTM IN THE PSPCMPROG WHERE OBJECTVALUE1 LIKE "RECNAME" AND OBJECTVALUE2 AS "FIELDNAME".
-
How to find the status of the package (valid/invalid) was at one time
How to find the status of the package (valid/invalid) was at one time?
I want to find the status of an oracle package to 15:00 yesterday. Today, the status of this package is INVALID.
I'm sure it was VALID yesterday. But no way to prove it. Can any one help please?
I can generate AWR report for the last 7 days...Try to use a flashback, like this query:
select object_name, object_type, status from dba_objects AS OF TIMESTAMP (SYSTIMESTAMP - INTERVAL '18' HOUR) -- 18 hours ago where object_name = 'MY_OBJECT' ;
If you have not granted privs FLASHBACK, you may connect as SYS to make a request flashback on a table data dictionary.
But this should give you the info you need - if it's still in cancellation. -
How to find the velocity of an incremental encoder
I use the RE22I encoder which can give up to 8192 pulses per revolution, I have A, B, Z reports that I use an fpga as a controller Please help me.
How to find the speed of the encoder using these signals I'm going to have a clock in the fpga sysytem will help.
Start by looking at the information on Wikipedia on the rotary encoders and a book on encoders OR white. These articles will give you a basic understanding of the encoder and the signals it produces.
With proper decoding, you can get the direction and momentum of each of the points on your encoder 8192. If the tree can reverse (same vibration on one point unique all-in-mnearly stationary), full decoding must be used. If data are only of interest while the tree turns in a direction and speed will not close to zero, a simple decoding can be used. Decoding of a quadrature encoder is a good way to learn to use a state machine. Signals A and B can exist in only four possible combinations, but the possible transitions to do interesting things.
Define DECODING is a purely logical exercise and it is a simple coding in LabVIEW, such as a state machine. There are examples, Desing Patterns, or project templates (depending on your version of LV) that come with LV to help you get started.
By using the channels A and B you can update your calculation of velocity 8192 times per turn. With the help of Z you get only an update by the revolution. You use depends on your application. The pulse of Z is also useful to define a reference position for the measurement of phase angle.
Lynn
-
How to find the number of data items in a file written with the ArryToFile function?
I wrote a table of number in 2 groups of columns in a file using LabWindows/CVI ArrayToFile... Now, if I want to read the file with the FileToArray function so how do I know the number of items in the file. during the time of writing, I know how many elements array to write. But assume that I want the file to be read at a later time, then how to find the number of items in the file, so that I can read the exact number and present it. Thank you all
Hello
I start with the second question:
bytes_read = ReadLine (file_handle, line_buffer, maximum_bytes);
the second argument is the buffer to store the characters read, so it's an array of characters; It must be large enough to hold maximum_bytes the value NULL, if char [maximum_butes + 1]
So, obviously the number of lines in your text tiles can be determined in a loop:
Open the file
lines = 0;
While (ReadLine () > 0)
{
lines ++;
}
Close the file
-
How to find the position of the VI icon currently run on the block diagram of the appellant
Dear forum,
I am currently trying to use a LabVIEV VI as a simple sequencer: several (very slow) actions must run one after the other. Each action is represented by a Sub - VI, some actions are executed several times. My task is to view the Subvi somehow executing.
My first intention (just manipulate the icon of the VI running with 'Icon.Get VI as Image data' / 'Icon.Set VI of Image data' invoke nodes) has failed, because it changes all instances of the VI icon. If you use the same VI several times, all these VI icons are changed (see here: http://forums.ni.com/t5/LabVIEW/How-to-change-animate-icon-of-currently-running-VI/m-p/3120754/highl... )
My current approach is to use an image of the block diagram (with "VI: block diagram: get resized Image ' call method) in a picture of the front panel control and working within this control. But for this I need to know the position of the icon of the VI running. I know that I can assess the limits and Position via the properties GObj, but how to find the VI running (note that a VI can be installed several times on the block diagram, so the name of the VI is not unique)? IMHO the easiest way might be if a VI might find its icon on the block of the appellant diagram itself when it is run...
It is clear that this position is not yet the position on the photo, but this conversion is a small piece of work...
Kind regards
cpschnuffel
-
How to find the password for my Motorola Wireless?
How to find the password for my Motorola Wireless?
How to connect another computer to the Motorola Wireless?
... and now my computer won't connect to the wireless...
Now would be a good time to use the instructions of the Setup Guide quick Motorola SBG940.... I think I'll call my cable provider then!
It may be better to talk to someone on the phone instead of trying to communicate via typed messages repeated as some of the information in the previous messages typed always seem to be lost in translation. -
Mr President
This is the page of the glassfish Server
How to find the url of adf application that has been deployed to the glassfish Server? I try but? It is the image of the page.
In the jdev web module are
[11: 09:38] wrote the Web for F:\backup of AshCMS\AshCMS\ViewController\deploy\AshCMS_ViewController_webapp.war application Module
[11: 10:33] wrote the Module Enterprise Application to F:\backup of AshCMS\AshCMS\deploy\AshCMS_Project1_AshCMS.ear
[11: 10:33] Application deployment...
[11: 14:24] Application deployed successfully.
[11: 14:24] time to deployment: 8 minutes, 11 seconds
[11: 14:24]-deployment is complete. ----
what url in the browser.
Concerning
Mr President.
I run my application on built-in web logic server and get the url from there
http://localhost:7101 / ViewController/faces/MainPage
then simply change the localhost of 7101 to 8081 as below
http://localhost: 8081, ViewController, faces, MainPage
and it works
Concerning
-
How to find the ID of the existing contact?
I need to update an existing contact in Eloqua, but to do that I need to find the ID of the contact.
I know how to get the ID of the contact after it is created the first time, but once it is already created how to find the code.
How do I do that?
Here is my code that I use to update, I just need to solve for '?
EloquaAPI. DynamicEntity [dynamicEntities] = new EloquaAPI. DynamicEntity [1] ;
dynamicEntities [0] = new EloquaAPI. DynamicEntity ();
dynamicEntities [0]. EntityType = entityType;
dynamicEntities [0]. Id = "???";
dynamicEntities [0]. FieldValueCollection is new EloquaAPI. DynamicEntityFields ();
dynamicEntities [0]. FieldValueCollection.Add ("C_GUID1", GUID);
dynamicEntities [0]. FieldValueCollection.Add ("C_FirstName", FirstName.Trim ());
dynamicEntities [0]. FieldValueCollection.Add ("C_LastName", LastName.Trim ());
dynamicEntities [0]. FieldValueCollection.Add ("C_EmailAddress", Email.Trim ());
dynamicEntities [0]. FieldValueCollection.Add ('C_Type1', 'Contact');
EloquaAPI. UpdateResult [] result = service. Update (dynamicEntities);
Joey
Hi Joey,
If you do not already have the id of the contact, then you will need to use the. Function Query() to get it – most commonly ask you based on the email address. For this call API documentation is here:
The example code in this page is not large (without having to download the entire sample application), but here's a basic use (VB.net):
Dim contactId As Integer = 0
Dim etContact As New ELQService.EntityType
etContact.Type = 'Base '.
etContact.Name = "Contact".Dim result = are. Query (etContact, "C_EmailAddress ="[email protected]"", {"Id"}, 1, 50)
If result. TotalRecords > 0 then contactId = result. Entities (0). IDChris
Maybe you are looking for
-
I backed up my favorites until I have re-formatted my computer. I used Firefox backup tool. On the registration screen, the only thing I remember was the name of the file, but everything I've done done him be saved to one type other than the "JSON" f
-
Satellite M30: CD ROM is not working properly
Hi all Please bear with me - I am a newbie to this! I have a Satellite M30 and have problems with the built-in DVD ROM S6112 player. It plays fine bought audio cd and rips OK. Does not seem to play bought DVD of either. Can not burn blank CD - R or R
-
How to disable the connection of identity when opening Outlook Express
How to disable the connection of identity when opening Outlook Express
-
Volume won't work for Netflix, using IE, Chrome and Mozilla even
I uninstalled Silverlight and reinstalled. The volume works great watching Fox News, YouTube, etc. But it won't work while playing Netflix. Netflix said that it is in the back of my computer and how their material is served to me through Silverlig
-
created and last_ddl_time are not correct
4.1beta: the query to retrieve the stats is not correct, as using "rownum = 1" instead of use the object_typetest case:Select * from user_objects where type_objet = 'INDEX' to order of creation;Object_name: PK_DEPTCreated: 31 October 14Now, create a