How to fix 7B BSODs after migration from Windows XP sp2

Similar Questions

• Help! After migration from windows to IMac, I can't use my license to elements14!

  In recent years, I use elements on my windows computer. Now, I decided to switch to an IMac and I migrated my photos and the catalog successfully. Everything works on my new IMac, but I can't the license version IMac of 14 elements. My serial number, I used on my old computer Windowc, is not accepted on the IMac. What should I do? I heard it is possible to use a single license of components on both computers. Who can help me? What should I do? Do I have to purchase another license, I bought 14 items only a couple of months.

  Thank you

  Helmut

  Hi Helmut. Go to this link. Click on the blue button; When logged in with your Adobe ID; then click on Chat 24/7. Ignore the proposals of links that will take back you a full turn on this forum. Continue straight on the blue button at the bottom.

  Contact the customer service

• Migration from windows to Linux - not able to activate maintenance mode

  Salvation of DBA
  
  After Migration from windows to Linux, I'm not able to activate maintenance mode, it gives the following error.
  
  Please select an option:
  
  1 activate the Maintenance Mode
  
  2. turn off the Maintenance Mode
  
  3. return to the main Menu
  
  
  
  Enter your choice [3]: 1
  
  sqlplus-s & un_apps / * @/s03/oracle/prodappl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
  
  An error occurred while executing adsetmmd.sql.
  Continue as if it was successful [No.]:
  
  
  Please tell me the way farword.
  
  Best regards
  Suresh Gelda

  You're welcome, Suresh.

  Also thanks to Arnoud :)

• How to migrate from Windows XP to Windows 7 non-destructively?

  How to migrate from Windows XP to Windows 7 to non-destructively?... meaning is there a way to do this without backup data (on the XP disk), the Windows 7 upgrade and then restore the XP backup data?

  Moreover, since the structures of folders (I am told are slightly different) XP and Windows 7 where can I restore the data from?

  for example where my Documents from XP to go on the side of Windows 7? and so on... there at - it a 'table of equivalence' for this?

  Thank you.

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• I have a disc for Photoshop CS6 installed on Windows PC. I want to buy a Mac and CS6 a migration from Windows to Mac > any ideas how to do this, I don't want to have photoshop CC.

  I want to transfer my Photoshop CS6 of Windows to Mac. My drive is a single Windows software. How to migrate from Windows to Mac. I don't see how to contact adobe to ask directly. Thank you, I do not want to subscribe to Photoshop CC cloud or buy a new Mac Photoshop CS6 disk.

  You must ask for a swap of platform your PC CS6 cleaner and install CS6 on your Mac with the new Adobe series provide you. A product for another language or version of trading platform

  You can also still buy perpetual CS6 700 $ $1000 Standard extended.

  You can always buy CS6 products by calling a call center of Adobe, but why would you? Creative Cloud features will take your creativity further with more ways to create, collaborate and share.  To purchase by phone, call the 800-585-0774.

• I can't view the network connection after downgrade from Windows Vista business to Windows XP Professional.

  How can I view network connections after downgrade from Windows Vista business to Windows XP Professional. I have problems to install the drivers of my HP dc7800.

  Click Start > my network places > view network connections in the left pane.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• How to fix the position of the cmd window?

  I would like to know how to fix the position of the cmd window on the upper right corner instead of middle of anywhere in the window.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  Hello!

  Open "Command Prompt", right-click the title bar and choose "Properties".

  Go to the Layout tab.

  In terms of the "Position of the window", uncheck "Let system position window.

  Change the Left and Top values to your preference - on my system (left = 290, Top = 0) are ok.

  On the same tab, look at the picture under "Overview of the window" to try different values - the window position changes after entering a value in the left text box and pressing the tab key.

  I hope that helps!

• Thunderbird. Migration from Windows Mail (Win7) and Firefox 35.0.1 is not compatible with ImportExportTools of Mozilla Support

  Try to migrate from Windows Mail, NOT Windows Live Mail in Windows 7 Home Premium.
  When I try and import the messages I get the message ' ImportExportTools is not compatible with FireFox 35.0.1.
  I'm following the instructions at https://support.mozilla.org/en-US/kb/switching-thunderbird.

  Y at - it a compatible version?

  Concerning

  Chris Parker

  You can download the extension using Firefox.
  But you will need to install it in Thunderbird.
  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• How to open .wim file after backup in Windows 8?

  How to open .wim file after backup in Windows 8?   The files were backed up on an external hard drive in the form of .wim files before the 'crash' and 8 re-installed windows.   Now, I can not restore files.   The computer does not recognize the external hard drive when I try to restore through troubleshooting > adv options > System Image recovery.

  Hello

  Same as Windows 7:

  http://support.HP.com/us-en/document/c03056985

  Kind regards.

• DB migration from windows to linux

  Hi all

  I need migration oracle db 6.2 RHEL 64-bit to 64-bit windows server 2007

  DB versions are 11.2.0.3.0 (linux) 11.2.0.1.0 (windows)

  Please give what strategies could be adapted to achieve this objective and what is recommended?

  Also if possible steps.

  Thank you

  You can try following steps
  

  List of the steps required to complete the Migration

  The migration process is simple, but as there several steps it is convenient to become acquainted with them before you run it.

  1. check the compatibility of platform between source and target OS
  2. start the database in read-only mode
  3. check the availability of database for the transport from Windows to Linux using DBMS_TDB. CHECK_DB
  4. check if there are external objects
  5 run the Rman Convert Database command
  6. converted copy datafiles, generated Transport Script and file settings for Linux
  7. change the init.ora for the new database
  8. change the Script of carriage and the parameter file change the paths from windows to Linux paths
  9. run the Script of Transport
  10 change the database ID
  11. check the integrity of the database

  Step by step for more information, please consult this document: Database Migration from Windows to Linux using RMAN

• Migration from windows to Linux - error Autoconfig

  Salvation of DBA
  
  I'm doing Migration from Windows 2000 to Linux Migration 4.0ES.
  Application - 11.5.10.2, database - 9.2.0.6.
  
  Follow-up documents
  230627.1 - import/export of the process for Instances of Oracle Applications Release 11i with Oracle9i Enterprise Edition database
  238276.1 - migration to Linux with the version of Oracle Applications 11i
  
  So far, I'm done as follows.
  
  (1) doc - 238276.1
  1 complete on the source instance section.
  (2) doc - 230627.1
  Article 1, Section 2, section 3 complete.
  (3) now, I started 238276.1
  Article 2.
  Step 1 - update the manifest - completed
  Step 2-copy appl_top and Common_top - finished
  Step 3-Clone the AutoConfig XML context on the system file target - finished.
  Step 4 - Install iAS Oracle Home - finished.
  Step 5 - apply the patches for Oracle to Red Hat Enterprise Linux interoperability - ignored
  Note - because my application is 11.5.10.2.
  Step 6 - Run AutoConfig installation phase on the system target - error.
  I run the command as follows.
  # cd < AD_TOP > / bin
  ./adconfig.sh # run = INSTE8_SETUP contextfile = < target system ctxfile >
  [applmgr@aqherp bin] $./adconfig.sh run INSTE8_SETUP contextfile=/s03/oracle/prodappl/admin/PROD_aqherp.xml =
  Enter the password for user APPS: implementation of specified Script: INSTE8_SETUP
  
  The log file for this session is located in the: /s03/oracle/prodappl/admin/PROD_aqherp/log/01122007/adconfig.log
  
  AutoConfig is to configure the application environment...
  
  AutoConfig will consider custom templates if it is present.
  Using APPL_TOP location: / s03/oracle/prodappl
  ERROR: Unable to set the classpath
  None of the following are present
  /usr/JRE/lib/RT.jar
  /usr/lib/RT.jarERROR: cannot set the classpath
  None of the following are present
  /usr/JRE/lib/RT.jar
  /usr/lib/RT.jar Classpath:
  
  Conflicts of version between custom of encountered models and sustained development; abandonment of the AutoConfig run.
  
  The log file for this session is located in the: /s03/oracle/prodappl/admin/PROD_aqherp/log/01122007/adconfig.log
  [applmgr@aqherp bin] $
  ==========================LOG FILE SHOWS=================================================
  Starting from AutoConfig Mon Jan 12 20:07:21 2009
  Using adconfig.pl version 115,81
  
  Implementation of specified script: INSTE8_SETUP
  Classpath:
  
  Conflicts of version between custom of encountered models and sustained development; abandonment of the AutoConfig run.
  
  
  Please help me solve this problem.
  
  Best regards
  Suresh Gelda

  Suresh,

  I'm glad to hear that.

  You are welcome.

• Move photos on external hard drive after migrating from iPhoto to Photos

  I have a lot of photos and have you run out of space on my MacBook.  After doing some reading, I discovered that I should be bale to move my library to an external hard drive, then the point of Photos to run from the external hard drive.

  I have recently updated to El Capitan, and as part of this upgrade that my photos have been migrated from iPhoto to the Photos.  I just checked the current location of my library and I found two.  One is named Photo library and which resembles the pictures one use which makes sense.  However, I also have a file called iPhoto library and it is listed as a library migrated under file type.

  My question is, when I copy my pictures on the external hard drive also I copy the migrated thus iPhoto library?

  My question is, when I copy my pictures on the external hard drive also I copy the migrated thus iPhoto library?

  Yes, if you want to free up your internal disk storage moving two libraries of the iPhoto library you have migrated your external drive and the new library of Photos.

  The two libraries share the storage for the original images and previews.  As long as one of the libraries is always on the internal disk and using storage, storage is not released: see: Photos saves disk space to share images with your iPhoto or Aperture - Apple Support libraries

  Drag the two libraries to your external drive, then double click the pictures library to open it in photos and test it. Once you are convinced that the copied library works well, you can delete the original in the internal drive.  Do the same for the copied iPhoto Library if you have installed iPhoto.

• How can I recover programs and data from Windows.old after upgrade to Vista?

  Windows XP Professional has been installed beforehand.  None of the programs or data have been transferred to Vista.

  Hello

  You cannot recover programs from windows.old folder

  It needs to be reinstalled from the original media

  Here's how to retrieve data from the windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

• After migration from Solaris to Linux reports do not work properly

  Oracle e-Business 11.5.10.2 - seeds pdf reports

  Some do not run giving error:

  EMSG: led by Signal 11

  Others work but are formatted incorrectly.

  Background:

  Migrated from solaris to linux. -11.2.0.4 database.  Upgrade from Solaris to dev 6i group patch 28 - everything works.

  On linux, install techstack then switch to dev 6i patchset28 also.

  
  

  I checked the support and apply a hotfix that was a possible fix-

  Bugs: 5232832 - APPS6: BLANKS INSERTED IN the CHARACTER MODE OUTPUT

  subsequently found out that it's just for the report of the bitmap.

  
  

  Check all the notes I've found, but nothing seems to apply.
  

  
  

  My character set is the same on Solaris and Linux-
  

  US7ASCII NLS_CHARACTERSET

  NLS_NCHAR_CHARACTERSET AL16UTF16

  Anyone have any ideas? Thank you!

  11 signal problem is resolved as follows:

  The reporting engine, on the Linux server upgraded, is not able to parse an sql validation using a table via dblink only at a specific location in the report. There are several other places in the report where it is able to analyze the same sql, it is so inconsistent and there is no error message relevant to this effect. The solution has been applied through rewriting of these validations to validate within the EBS itself and therefore, the functionality remains unchanged.

  Formatting problem was solved by re copy the rdf from the source in binary mode.  Something must have happened to the file to archive original, OR a nobody messed with the report on the target of unknown to me!

  Also, I set up printing blocks and drivers for the system and styles, so maybe it was a combination of the two actions.

  Thank you for all your help.

• How to migrate from windows 2003 to windows 2008 with all the work of GPO active directory, DNS, without problem?

  Hello...

  I have a problem with windows 2003 to windows 2008 migration. I have try several round of flyway of google and youtube, but he is still fail.
  in the first,.
  I have HP Proliant server with windows server 2003. So I restore the backup to a different server HP Proliant wih same hardware specification. I've been back up the System State and the drive C with NTBackup. After I restored on HP Proliant, that I want to migrate, the DNS server is timeout request and the client cannot join domain. I was surprised, because the backup and the material is the same, but it can work as well as the original server.
  in the second case,
  I have windows server 2003 in HP Proliant server and it works well. I'm doing a replication on this server to another windows 2003 server in an another HP Proliant and works of good replication (another user can join the domain). After, I have installed windows server 2008 to another PC and make the replication of the duplication of windows 2003. And this success to replicate, but not on the DNS (DNS query time-out).
  I have the despair to try migrating Windows 2003 and 2008 because he is still fail in DNS. Another way to migrate to Windows 2003 and 2008 with DNS, AD and GPO work?

  Hello

  The question you posted would be better suited to the TechNet forum where IT professional will deal with your question.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads