How to fix my computor to play on my television, I got the purse strings, the sound comes thru but no picture

How can I configure my computor to play on my television, I led but not picture coming through sound game

Hello

1. have you tried to check with different cables?

2. do you receive any error messages?

Method 1: Connect a Standard VGA display to the computer and check if it works

 

a. click Start , click Control Panel and then click personalization

b. click on display settings

c. under display settings , click the Parameters tab

d. Select the monitor display in the drop-down under Show

e. put a tick against extend my desktop on this monitor

f. click on apply and then click on the Advanced button.

g. click the graphics card installed on the computer, for example, the Intel Graphics Accelerator media, and

and then click the graphics properties under Advanced

h. then in display devices select television as the unique view and under multiple display Select primary

TV device and secondary device such as laptop or laptop

i. click Ok on all windows to close the display properties.

Method 2: update video driver

Update the video driver by following the steps in the site mentioned below and check with the question.

http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work correctly.

Also check the sites listed below:

1. http://windows.microsoft.com/en-US/windows-vista/Connect-your-computer-to-a-TV

2. http://windows.microsoft.com/en-US/windows-vista/TV-on-your-computer-Understanding-TV-signals-and-TV-tuners.

Tags: Windows

Similar Questions

  • I see a file, when I play the sound comes on but no picture any suggestions thanks

    I downloaded a dvd of my home movies that I can see the files, but some play that for 29 seconds and one that says it's a little over an hour just plays the sound, even if I see the picture of him on the record at the beginning.

    Hello

    ·        What operating system is installed on your computer?

    ·        What is the type of file you are trying to play?

    ·        What application are you using to play the file?

    ·        Are you reading DVD file or you saved the file on the computer and then play?

    Method 1: If you play the DVD in Windows Media Player, then run the troubleshooter below and check if it solves the problem:

    Open the Windows Media Player DVD Troubleshoot utility

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

    Note: applies only to Windows 7.

    Method 2: Alternatively, you can try to install the codec for the file type and check if it helps:

    Codecs: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

    Windows Media Player frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-frequently-asked-questions

    Note: applies to Windows Vista and Windows XP as well.

  • How can I say ios10 music playing ONLY what is loaded on the phone?

    How can I say ios10 music playing ONLY what is loaded on the phone? There was a way under ios9, but I can't find anything on ios10. When I shuffle a kind (like ROCK that has only 4 artists, I chose it), I want to shuffle only what is loaded on the phone, not what's on my mac (in the cloud)... I load only a few artists both because of space constraints. I have over 200GB of music on my mac...

    I don't want to see the playlists and artists who are not loaded on the phone either, but I can't find how to solve either!

    Launch the music application and go to the library > music downloaded. This shows that what is stored locally on the phone.

  • The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

    The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

    Hi Sarma_RN,

    1. When you receive the error message?

    2. update you are trying to install?

    3. When was the last time you were able to install updates?

    If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.

    These errors can occur caused by one of the following problems:

    • Applications or processes that interfere with Internet communications
    • Problems on your computer
    • Strong Internet activity
    • Recoverable database errors

    See the Microsoft article and try the steps mentioned below.

    You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

    http://support.Microsoft.com/kb/836941

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I've never had trouble with the sound level before, but a video of a conference that I view, is barely audible. I think it's my computer/speakers-how can I check this? Leprosy S

    Help make the sound on my computer (and its speakers) stronger?        I've never had this problem before, and I am listening to a teacher talks about a video and it is almost inaudible.

    Susan

    Hi Susan,.

    To provide the proper resolution, I would need more information on your side.

    The problem is specific to this particular video?

    Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

    Method 1:
    We will first perform this troubleshooting and check if it helps.

    Diagnose and solve the problems of Windows audio playback automatically
    http://support.Microsoft.com/mats/AudioPlayback/

    Method 2:
    If the problem persists I suggest you try the procedure described in the article and see if it helps.

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    See the article for more information.

    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • When I play a movie on my laptop the sound crackles constantly and is interupting the media currently playing, how should I do?

    Original title: I have recently moved to College, when I play a movie for example on my laptop sounds constantly crackling and interupting the media currently playing, how should I do?

    I have recently moved to College, when I play a movie for example on my laptop sounds constantly crackling and interupting the media currently playing, how should I do?

    Hello

    1 have you ever done any recent hardware or exchange of software on your computer before the show?

    2. What is the format of the movie file type?

    3. what Media Player do you use?

    4. what operating system is installed on your computer?

    5. are you facing the same problem with an audio file?

    6. are you able to play the video properly?

    7. What is the brand and model of the laptop?

    8. do the same thing happens when played with different players?

    What version of the operating system Windows am I running? :

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    For reference:

     

    Tips for solving common audio problems:

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

     

    I hope this helps.

  • Director of Windows won't start; How to fix error: "component identity found in manifest does not match the identity of the requested component»

    Whenever I try to start Windows Movie Maker, I get the following error:

    "Sorry, cannot start Windows movie maker. Make sure your satisfied computer minimum system requirements before you try to start the Movie Maker and then try to update the driver for your video card if Movie Maker does not start".

    I know that my computer meets the minimum system requirements because it came with the whole package. I've also updated my video driver correctly several times. I even uninstalled Movie Maker, re-installed. Even uninstalled the complete set of Windows Live and re-installed, but it still does not work. After a lot of searching for answers, I found the event log in which this error:

    «Activation context generation failed for "C:\Program Files (x 86) \Windows Gallery\MovieMaker.Exe".» Manifest error or policy of the folder "C:\Program Files (x 86)" \Windows Live\Photo Gallery\WLMFDS. "." DLL"on line 8. Component identity found in manifest does not match the identity of the requested component. Reference is WLMFDS, processorArchitecture = "AMD64", type = "win32", version = "1.0.0.1". Definition is WLMFDS, processorArchitecture = "x 86", type = "win32", version = "1.0.0.1". Use sxstrace.exe for detailed diagnosis. »

    I don't know, but I think it's causing my movie maker does not start. I looked around even more of an answer to this question on how to resolve this error, and I couldn't find anything so far. Microsoft support said that I have nothing to do and it will solve automatically. Alas, I got this error whenever I tried to open Movie Maker (the time is equal to the time I tried to open it).

    What can I do to fix this?

    Thanks in advance.

    Hello JurrianH,

    You can go ahead and post in the forums alive in dealing with the problem with Live Movie Maker specifically. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  • How to fix 'error message' installation of windows services stops working during the installation!

    Windows Vista Edition Home Premium

    service pack 2

    Toshiba

    satellite A135

    32 - bit operating system

    Hello

    1. Once you get the error message?
    2. What is the full error message?
    3. what program or the application you are trying to install?
    4. have you done any software or hardware changes on your computer before this problem?
    5 is the issue limited to a particular application?
     
    To work on the issue, check the following link.
    How to solve problems when you install or uninstall programs on a Windows computer
     
    See the steps mentioned under Windows Installer issues in the RESOLUTION section.
     
    Check if it helps.
  • How to fix code 8007000D that appears whenever I try to run the platform for windows vista update?

    I am trying to install the new version of MSN Messenger (2011), but to do that, I need to install first the platform update for Windows Vista and everytime I try to do, I get an error message and I can't finish.

    A program on your computer interfered with the installation

    What application anti-virus or security suite is installed and your current subscription?

    What anti-malware software can be installed.

    Just out of curiosity you use SpyBot Search and Destroy? Resident Tea Timer of Spybot is & she always enabled?

    0X8007000D ERROR_INVALID_DATA

    Description

    These data are incorrect.

    Description of the update of the system for Windows Vista tool

    http://support.Microsoft.com/kb/947821>

    0R

    Launch a collateral request for assistance free Windows Update:

    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527>

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

    For enterprise customers, support for security updates is available through your usual support contacts.

    04/16 / 1107:05: 42 pm

  • How to fix a client SSL key private credential error code in the event viewer

    Hi people,

    I hope someone can help. I am currently using Windows 7 Professional 64 bit, updated with the latest updates from Microsoft.

    I get the following error message, ()every 5 minutes exactly) in the Event Viewer administrative, computer management.

    "A fatal error has occurred when trying to access the private key SSL client credential." The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10003 "

    It began on October 14, 2014. There are now more than 40,000 of the codes of this edition.

    A sample of the log data is as follows;

    Log name: System
    Source: Schannel
    Date: 18/10/2014-20:54:40
    Event ID: 36870
    Task category: no
    Level: error
    Keywords:
    User: SYSTEM
    Computer: AP1
    Description:
    A fatal error occurred when attempting to access the private key SSL client credential. The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10003.
    The event XML:

     
       
        36870
        0
        2
        0
        0
        0 x 8000000000000000
       
        133003
       
       
        System
        AP1
       
     

     
        customer
        0x8009030d
        10003
     

    I looked at all the suggestions online and have found nothing of what is specific to this problem for windows 7 and how to solve it. I would be grateful if someone could guide me in the way to solve the problem.

    Thanks in advance.

    Tom

    Dear Isha,

    Thanks for your follow-up. After spending considerable time on the issue, I stopped just by using the function of collective housing, which heals many error codes. It is redundant to a standard network configuration and is not worthwhile. Since Windows 10 deletes the function of group living, I'm not sure that I need to spend time on this...

    I have also had also removed the bad machine key and senior partners of information in the directory of network of peers, which seems to have solved the problem.

    Thanks for your thoughts.

    Tom

  • My computor would not start windows, so I got the opption to boot with the disc. But with the TI istalled a new windows 7 on my computor and all my files are gone. How can I get the file.

    second copy of windows 7 has been installed. How can I retrieve my files from the old copy of windows 7

    That depends on the options you chose when you made the installation.  If you chose to keep your old files, you can view the folder c:\windows.old .  If you opted to install on another partition, you can retrieve the files from the old partition.  Otherwise, you would have to have supported your computer before reinstalling.

    When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. External hard drives 1 TB are about $85 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

    http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

    Good luck.

  • How to fix "Printer error state" when I try to print to the HP Laserjet 3030?

    Have not been able to find information on why my HP LaserJet 3030 printer cannot be used with the new computer from Samsung in Windows 8.  I chose driver for printer, but receive error messages - "Printer error state" or "Cannot find the output device" - when I try to print.  What can I do to fix this?

    Unplug the printer for PC > uninstall all printer drivers > restart PC > down load & install the correct driver from the HP Web site > reconnect and turn on printer:

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=378058&TaskID=135&cc=us&lang=en&prodSeriesId=378056&prodTypeId=18972

  • Supplementary question: how to fix refresh settings, so that my browser does not destroy the information from the entry form?

    In addition to the question below, another problem is not only my email responses are deleted when the browser refreshes, the message itself is no longer available. I have to start from the point early in my e-mail list, rather than staying on the email once opened.

    Moreover, I reset and restored my Firefox as a solution, which did not help. I did it twice, following the instructions. The process has been painful and I had to get a little information, not to mention a problem with bookmarks merged. I would like to avoid this solution at all costs. Here's what I said earlier. Once again, thanks for any help, you can provide.

    For several weeks now, I noticed that my browser "refreshes" the food more frequently, so often, in fact, that no matter what email, chests or survey questions that I answer get wiped. It started to happen with the last update. I can't find any setting in my preferences that will stop the constant refresh (reload? updates page?). It's also frustrating when trying to make purchases online, and as I said, write emails, fill out forms, fill out surveys, etc.

    Thank you in advance to quickly solve this frustrating problem?
    I use a Mac and spin the Mavericks. This problem was present with the previous operating system, too. Thanks again!

    Greetings,

    The new version of Firefox, 27.0, seems to have solved all the problems I listed above, and I am delighted. Thank you for your time trying to help me solve problems. For security reasons, I was hesitant to go to an earlier version and went to the opera instead. Opera didn't is not supported, however, by my institution if while it helped, I couldn't stand using it.

    Thanks, too, to the team which built 27.0. I appreciate it.

    My problems are now solved.

  • How to fix error code 0 x 80040017 windows xp by using the model of gateway 838GM w / i4 processor

    I get the error of Activation produces Windows error code 0 x 80040017.  I tried to restore the system to an earlier date, without success. Help, please

    I'm working on a gateway 838GM with processor intel 4.

    Hello

    You can contact the Microsoft Product Activation Center.

    http://support.Microsoft.com/kb/950929

  • How to fix error 1316, is - a I'm trying to uninstall the toolbar to download Youtube

    I use Windows XP and I stupidly downloaded Youtibe downloader toolbar and now I can't get rid of it, I get a msi error message stop to remove. (Error 1316)

    There, can someone help me

    Hello Hamt,

    If you want to stop your toolbars, you must do the following:

    1. go on the internet.

    2. access to the additional internet (top-right) (ALT + X).

    3 Manage Add-ons.

    4. toolbars and extensions.

    5. Select the things to stop youw Ant.

    6 stop press.

    7. you're done.

    Greetings,

    DummyArbiter010 (NL).

Maybe you are looking for