Ridiculous display

Similar Questions

• Incorrect storage display

  I own a Macbook Pro 13 "early 2015 model.

  It works perfectly and I got no problem with him, until today where I just checked storage left, and it's ridiculous. My Mac has a total capacity of 256 GB, but it says that 192GO is available. But the display bar shows that my Mac is almost full.

  What is going on? How do I know how much storage my Mac has made remaining? I'm sure that's not 192GO, given all the applications that I have.

  Seal of this screenshot for reference.

  

  Try one of these applications:

  Drive Sweeper

  https://www.OmniGroup.com/more

  or

  Great view

  http://grandperspectiv.sourceforge.NET/

• using Windows 7 my googlemail whole display shows about 5point size. What can I do to change this

  Operating system is Windows 7. I have always used Firefox but recently all my display Googlemail, not only the text of the email but the entire screen is rendered in a font size that must be about 5 points or less. I can increase the font size for e-mails without difficulty, but all of the labels showing Googlemail etc. are ridiculously small. I can't find any way to increase the size. However, for all other purposes on the web, Firefox is as good as it has always been, help please?

  Try resetting you zoom by pressing on <>0 control zero.

  If that doesn't help;

  Many issues of the site can be caused by corrupted cookies or cache.

  • Clear the Cache

  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > network > content caching Web: clear now

  and

  • Delete Cookies

  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then confidentiality.
  Under historical, select Firefox will use the custom settings.
  There is a button on the right side, called View the Cookies.

  If there is still a problem,
  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart.

• Satellite 2410-303-display flashing, update the BIOS

  HY!

  I am the owner of the Satellite 2410-303 series. Display does not work very well. I do not know it is because of drivers (even me, I installed the drivers by default) or maybe it's because the LCD screen. Maybe poor contact or something like that? I don't want to take my turn for the service center more because they don't know how to solve the problem. Only what they say is: «I'm sorry, but you have to buy a new...» »

  In speaking of the bios it is 1.20 in 2002. I want to download 1.40 (think it's most recent) but do not know where to download... Please help because this is my first tour & I want to revive his soul... THX.

  Hello

  I always thought that this forum is serious, but you try to make us laugh reading your ad.

  Sorry, but your comment about service is for me really ridiculous. Do you really think that all the issues can be fixed and nothing should be exchanged? I respect your opinion, but I think you're not qualified to talk about. Or maybe you're a technician material. If so, then I feel sorry for my comment.

  Anyway, if you have a display problem trying to connect to external monitor and see exactly what is happening. It will be interesting to know how starts flickering.

• DSC-WX350 shows 'unable to display' remains after the withdrawal of the card photos

  I'm having a problem with the DSC-WX350 seeing "ghosts" of the pictures after having been withdrawn to a computer.

  If I pop the camera card, stick it in a card reader and move photos the camera on my computer, as soon as I put the card in the WX350 seem to see fake photos files moved: it acts as if they were still there (info, date taken, keeps in the County of photo, etc.) but only shows an error "Unable to display" gray.

  I then manually delete each erroneous entry manually. As you can imagine, making whenever I have move photos from your camera is a pain in the *. I've looked through all the folders on the card and see anywhere that would be markers of remains of file or something else because of this problem. Any ideas why this happens?

  (FYI, the card has been formatted freshly correctly before using it in the camera.)

  Thanks advance.

  Can anyone offer help?

  Per this message on the card need to be formatted, I made several times now to try to circumvent the problem: formatting through the camera, formatting through the computer, formatting the computer, then the camera... After each time the test photo, I take and then remove while the card is located on the computer returns an error "Unable to display the image" ghost once the card in the camera.

  This is ridiculous. I will not be manually re-deletion of photos I moved your device every single timejust to avoid this * error. What happens here?

• The iPhone display 6 Plus

  There is a problem with the screen of my iPhone 6 and confirmed by the genius of Apple Retail Store and they offer replace me free of charge because of the warranty coverage. After 1.5 hours of waiting, they told me that they cannot repair because they did not have the parts. The cause is that the supplier of the screen is not on the list of suppliers of Apple. I have to pay $329 for a new. It is ridiculous to have to pay the Bill. The screen has a problem, and Apple has no parts. This is Apple not the customer problem. Why the customer should pay for it?

  Some updates on this case.

  A person from the Apple Store called me that they claim that the display is the 3rd party not Apple. But the fact is I bought on Apple Store and nobody don't touch to repair or replace the display before yesterday. And the genius told me I should pay $129 to replace the display or $329 to replace the entire phone.

• Record, display and send the 16-bit Images

  I recently updated my Canon 7 d for a 5 d Mark iii and this made me learn all about 16-bit vs 8 bit files... (so many hours frustrated I was wondering why my pictures lost their color when I saved as JPEGs from photoshop).  Thus, you cannot save the 16-bit images in jpeg jpeg manages only 8 bits.  I get this now, but here is my Riddle... I am a wedding and portrait photographer, and I want to send my customers the best possible quality pictures that I can.  An image that I just finished work on East of 118 MB saving as tiff.  These seem ridiculously large files to send to customers - in terms of storage space, or perhaps their computers are fast enough to deal with all this information.  I tried zipping it, but he went up to 110 MB.  What other photographers are doing?  It seems such a shame to work in 8-bit - banding is horrible.

  Also, how is it when I export directly from lightroom, having never been through photoshop, my photos do not lose their color?  Lightroom is still save in format jpeg - so why does not them?

  Thanks a lot for any idea!  I'm barely entered on what is happening here, so I apologize if there is missing information!

  Your color changes are more likely to result from the color profiles not used correctly seen, rather than 8-bit / 16-bit.

  I work entirely in 16 bits (using the Adobe RGB or ProPhoto color space). In this way I avoid introducing bands, when editing and my own files do not lose color information.  However, if I send an edited image to anyone who is likely to display on a managed without color system (that is to say almost everyone!), then I export to JPEG (which is 8 bits) and convert it to sRGB. I always include the sRGB profile in jpeg format. Most of the clients will be discovered on systems that ignore the profile but at least sRGB is the safest in this situation.

  Dave

• Major display problem with Audition CS5.5 on Surface Pro 4 Tablet

  Hi people,

  I just got a new Microsoft Surface Pro 4 tablet, so I can edit on the go more easily than with my old laptop. I use Audition CS5.5, because I am a podcaster and radio producer, and it works wonderfully for these tasks. Unfortunately, when I installed hearing on this new tablet, I discovered a major compatibility issue. All text and buttons display so small that the program is essentially unusable.

  

  I tried to play with the display settings on the Surface, but they seem to have no effect on hearing. Even when I get the settings "change the size of the text, apps and other elements ' maximum, it has no effect on how the hearing poster (even if she handicap other programs).

  

  So I tried contacting Adobe via Facebook, and everything they said it was "Hi Chris, see if this article helps you to: . http://bit.LY/24jts28 "Thanks , ^ KM. Which I linked to an article from Microsoft. When I went through the troubleshooting process, however, he suggested 1) the same thing, I tried 2) communicating with Adobe or 3) buy the new version of the hearing.

  

  And earlier I tried calling technical support and they told me that they don't offer phone support for tablets.

  I am extremely frustrated. I love this piece of software and it would be ridiculous to pay a monthly subscription for the new version just change the display settings. Was Adobe really this careless with the design of this product, and they have now abandoned it? What can I do to solve this problem?

  Thanks for any help.

  -Chris

  Support should not consider the 4 Surface Pro tablet, from a support perspective, it's a PC.  I'm sorry to hear that you who were respected.

  Richard is correct, in CS5.5 we simply don't HiDPI screens on the piece of road, and you will probably find that's true with many Adobe applications since that time.

  In addition, as Richard has pointed out, in recent versions we did some work to support HiDPI screens as well as some of the capabilities of the touch Surface.  Here are two tweets I sent to a customer showing on my personal 3 Surface Pro:

  C Van Winkle on Twitter: "@DawsAngeles @duringleaves https://t.co/owizvYIbg0".

  C Van Winkle on Twitter: "@DawsAngeles @duringleaves https://t.co/Zw3NI41rMG".

• X120e display does not power on

  My Lenovo x120e apparently wants is no longer power on its LCD screen. The machine starts very well and I get a picture when I connect it to an external monitor over HDMI, but still nothing on the display real itself.

  I tried every combination Fn + F7 (computer only, duplicate, extend) does not. I also tried to adjust the brightness of the screen, no dice.

  I had this happen once or twice before, but every time that I was able to fix cyclic food machine or remove its battery. This time, I'll have no chance.

  And this problem power screen, the laptop itself was completely symptom free of any other problems/defects/hiccups.

  It seems that this person to another forum has had a similar problem (I can watch the process of full boot on my external monitor), but he ended up having to RAM his laptop.

  It also looks like they all experience the same problem, but they were all able to solve their problems of power cycling.

  I'm sure that I passed my (bought in February 2011) warranty period, so I hope that there could be some remedy at home there.

  Any help is appreciated!

  Called Lenovo today.

  Repair costs vary from $175 (at a minimum) up to $575. The guy on the phone said generally problems with the screen tend to be closer to the beach to $575, which is more (or right around) the price that I paid for the new X120e.

  Ridiculous.

• Retina MacBook Pro + Cinema Display = 25% of the images visible when open

  Every time I opened a picture, I see only 25% of it. I type Cmd +, Cmd - to zoom in & out each time. This is ridiculous. I think the problem might have something to do with the fact that the retina display has twice the density of pixels. It's just a theory, but I would bet money that he is the culprit. I just realized that the problem does not exist when I don't have my external monitor plugged.

  Here's what I see on the monitor external 27 ":

  

  Then after hitting Cmd +, Cmd-, that's what I see (this web form has reduced this image, but you get the gist):

  

  Can someone tell me please how to avoid this maddening problem? I contacted the Support Adobe technique, and they cannot help me with this problem. They gave up; they simply ignore my emails at this point.

  I use the latest version of Photoshop CC on a fairly new 15 "MacBook Pro retina with a 27" no - Thunderbolt Apple Cinema Display.

  
  Thank you

  Matt

  Thank you! I was able to reproduce the problem by using a Setup dual monitor as you have described. I logged it in our database of bugs for a developer can take a look. Looks like Photoshop is confused when it comes to the scaling of the image correctly to fit the screen while you work with a retina and monitor non-retine. The only solution I have at the moment is to use the command-0 to force the image to fit the screen. I know that's not a great alternative to what you already do, but it is a minus button.

  I also found that I got better results if I switched to tabs - sometimes opens the first image zoomed in, but after that, they would hold on the screen. If you can fit it into your workflow you can try it.

• How to incorporate and display a SWF in a Flex application.

  Hi all

  I'm trying to embed a swf animation in a flex 4.5 application and display it, but it does not work!

  I get error after error.  When I try to use addElement(), I get the following error:

  1067: coercion of a value of type mx.core:MovieClipLoaderAsset to an unrelated type mx.core:IVisualElement.

  If I use addChild(), then he throws another error when running.

  Here is my code:

  [Embed(source="assets/con_mov.swf")]
  private var connectMov:Class;
  private var conMov:MovieClipLoaderAsset = new connectMov();
  

  Here's the code I'm trying to use it to displey:

  borderContainer.addElement(conMov);
  

  I tried just to add to the application using this.addChild (connectMov), but I get an error during execution.  It's ridiculous!  Bringing a swf created in Flash into Flex and displaying should not require so much effort - IMHO.  There is a lot of documentation on how to embed a swf in Flex, but almost nothing about how to post!

  It's just a simple animation placeholder so I need access to all the functions on the inside, I want to integrate rather than using swfLoader.

  Thanks for any help or advice you can give!

  Matt

  Hello Matt,

  Yes you are right, it is not necessary to set the source of the image that we add a movieclip with swf. It was a mistake in my

  code, because I have tried it with too many crazy ways.

  Now the SWFLoader, ABT

  This technique works well with the SWFs that adds a graphical application or animations, but are not intended to have a large amount of interaction with the user. If you import SWF files that require a large amount of user interaction, you must build them as custom components. (Adobe Docs)

  Thank you and best regards,

  ---------------------------------------------------------------------- ----------------------------

  Kanchan Ladwani | [email protected] | www.infocepts.com

  ---------------------------------------------------------------------- ----------------------------

• How to display images in the Lightbox popup window or click the link to the map image Dreamweaver?

  I've built several image maps on a base image I want to use to display different pictures. I used successfully of Lightbox to display individual text pictures or thumbnails, but don't know how to make this work of image maps in Dreamweaver 8 and cannot even change the Dreamweaver onmouseover command coded so that it works from an action to click instead of a passage from the mouse that ridiculously open a popup window each time it is a passage of the mouse the map image.

  OnMouseClick nor onclickonly allow me to change the action that I would really rather have open in the viewer anyway.

  Here's what Dreamweaver is scripted for me (with a few small jacking to run):

  < area onclick = "CSAction (new Array(/*CMP*/'sp01')); "return CSClickReturn()' shape ="circle"coords ="552,439,9"href =" # "rel ="lightbox [kitchen]"title =" "alt =" "onclick =" MM_openBrWindow (' I / 01.jpg ', ", 'resizable = yes, width = 667, height = 505') ' csclick ="sp01"/ >"

  And here's what I usually script Lightbox text or thumbnail image link, but do not know how combine this with Dreamweaver image map code to make it work:

  "< a href ="... /... /.. "/ I/image.jpg" rel = "lightbox [kitchen]" title = "Title" > link text (or tile) < /a >

  I have problems with file is available online at:

  http://lifegivingspring.info/LGs/about/study/siteplan/

  I can see your problems, so I changed the image with your arrows and put some fotos below them in the lightbox you want:

  The upperone with the visibly frames (frames set to '1') of the worksheet, the other is completely identical, I only put managers to '0 '.

  OK dstx, please take a look once more here: http://www.goldschmiede-blumberg.de/PartnerringeAm.php.

  Hans G.

  HCH

• Phone display DEFAULT

  I use a headset (wired or BT) when my Droid is in the dock mediastation.

  Press the phone and the keypad is displayed

  -correctly in orientation landscape

  

  When in a call, press on KEYBOARD

  and the keyboard is incorrectly displayed in portrait orientation

  -makes it ridiculously difficult to enter digits or letters:

  

  Tap phone

  Tap on CALL LOG

  tap the CALL icon

  and the contact is called

  but the contact is displayed in PORTRAIT orientation

  

  All due respect, Matt, this problem of orientation was not a "design decision" - it is a default display serious in the behavior of the Droid PHONE software. It has nothing to do with any discussion on the home screen or to orientation rotation.

  It is a question of Motoroal - and no amount of discussion can justify showing letters and numbers on the side when the phone is a manufacturer supplied dock or "mediastation.

  The phone displays the software needs to be fixed.

  -michael

  Post edited by: slsmag to remove the implication that Matt never said the rumours-dial pad was a design decision... the redaction does NOT mean that I respect is more Matt. :))

  
  

• Cannot display the rest of the document in Dreamweaver CS3

  I'm a long-time GoLive user who has converted a number of Dreamweaver sites in recent months. Yesterday, I started to convert a web site of 1100 PHP pages, which represents my most complex customer site. What I noticed immediately, is that 90% of the pages show only the menu bar in the area of "design mode" and no registration below that. The code all displays correctly in the display area of code. I am really intrigued by this behavior.
  
  The < / head > tag shows in yellow in Design view. As a result, I see the menu bar that is actually made an include file. Below, each page is empty, except for the model pages PHP which are HTML pages and use the slightly different code.
  
  In the tests to try to identify the problem, I found that the page showed only when I deleted the line that calls to the top of the bar with a main menu include file:
  
  <? include('.. / composants/menu-sur.html ')? > < br >
  
  What is curious is that this includes the command is not new. Includes date from the middle of the 1990s. There are other include files in the HTML and display them correctly. I have checked and checked the formatting to include it, and it's OK. It is displayed correctly in all browsers and is very well read in GoLive. Dreamweaver only chokes on this particular item included. So I looked through the file include itself to see what I could find.
  
  It contains a few Javascript specific to GoLive function called in the head section, and the body tag has an onLoad call to the GoLive generated script file. However, when I removed those and tried again, Dreamweaver still refuses to show to the rest of the page unless I have to remove the menu include code.
  
  Any ideas how I can get past this annoying problem? I went back to GoLive, hoping CS4 can solve it, but this seems to be a really weird and I wish I had a solution in place soon. Thanks for any help you can offer.

  You have raised a very good point. None of the pages have redundant tags, but after reading your post, I realized that Dreamweaver is not filtering of the head and body tags in the included file, as well as GoLive and as do browsers.

  These tags are needed in the include file if you want to see how it will look, but DW can't deal with it. To confirm this, I checked the code view and I saw that the closing body and html tags are also yellow, a sign that DW reads those file include as belonging to the entire document.

  I think it is quite ridiculous that the current version of DW cannot deal with something that browsers properly handled in 1996, and that all versions of GoLive was handled properly. If someone reading that it's using the beta version of DW CS4, I would like to know if it solved this problem short-sighted.

• Display rowindex in datagrid

  Hello
  
  It all started with Flex, so at the risk of a ridiculously simple question: how to display the rowindex in a datagrid?
  My datagrid is filled using a dataProvider that points to an xml object. All the fields of the object fill in the different columns in the grid. There is however, no line numbers in the xml object, so I wanted to dynamically fill those who use a labelFunction or something like that. No luck however.
  
  To make things more clearly, that's what I want:
  
  colA | colB | Teachers
  1. valuex | Value1
  2. valueY | value2
  3. Test | value3
  
  ColA is not present in the xml object, then, how do I create?
  
  Thank you
  Ruud
  

  labelFunction(item:Object,_column:DataGridColumn):String
  {

  var int index is myDataProvider.getItemIndex (item) + 1;.
  Return index.toString ();

  }