How to fix the < windowsroot > \system32\hal.dll.
I have a fujitsu siemens amilo L7310GW. When you try to turn on just to get this message. Windows could not start because the following file is missing or damaged
Hi paulthorogood, It might be difficult to recover the operating system if there is no XP CD. · Windows XP was preinstalled on the system? · Do you know if there is a recovery partition? Method 1: The following article should help you to recover the operating system. Method 2: Since you do not have a disc, factory restore may be possible if there is a recovery partition or if there is no available recovery disk. You can contact the computer manufacturer for more information on this. Tags: Windows I checked the filesystem with the command sfc/scannow, it finds some dll files corrupted and it is also not instead of store, how to fix c:\windows\system32\opcservices.dll, TapiMigPlugin.dll, SxsMigplugin.dll, docagent.dll, tcpmon.ini corrupted files please help, I must pass several times to start my computer, it gives white screen after loading windows files. several times it gives Office to work. rest all the time balnk screen. JKMV72 When SFC cannot repair the files, it's time for a repair install from the dvd of the OS. While you may fix one by one, you never know what else is wrong with the operating system. How to fix C:Windows\SYSTEM32\DVRTL.dll How can I correct or download this C:Windows\SYSTEM32\DVRTL.dll? Every time I found a free download, it ends up being an annual fee and do not work. I feel like these problems should be of easy access and difficulty of Microsoft Hi Alex, Devrtl.dll error indicates that the associated devrtl.dll files in C "\WINDOWS\ is missing or corrupt." It is clear that devrtl.dll is a dynamic link library (DLL) file for Windows systems. Devrtl.dll of fixing missing or repair corrupted is not so difficult. I suggest you to scan SFC. The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations. See the following article about how to proceed. Use the System File Checker tool to repair missing or corrupted system files http://support.Microsoft.com/kb/929833 Post us the results after trying the steps above. Listening to an audio book online, the screen went black and the sound stopped. Nothing would work. I forced a stop... nothing else I could do, and when I rebooted I got this message. I have no CD with the HP compaq nc4010 and I (was) running XP Pro This behavior can occur if one or some of the following conditions are true: By default in the [Boot Loader] section of the Boot.ini file is missing or invalid. Windows XP is not installed in the location specified in the Boot.ini file. The Ntoskrnl.exe file is missing or damaged. The path of partition in the Boot.ini file is not set correctly. General failure. The article below should help you solve this problem. Error message: "Windows did not start because of a configuration of the disk of the computer problem. http://support.Microsoft.com/kb/314477 You must have a Windows XP installation disk to perform the steps listed in the article above. Hope this helps Post back if necessary ____________________ If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. Cannot start my computer. http://support.Microsoft.com/kb/945380 http://support.Microsoft.com/kb/314477 If this post answers your question, click mark as answer . How to fix the error message: xerces.dll is missing You try to view a dvd, but when I go to play the dvd, I get an error message: xerces.dll is missing. How can I solve this problem? Hello 1. what operating system do you use? Try to play the DVD on another computer and check. Xerces.dll error message can be caused by corruption in the Windows System. Check out the link to use the System File Checker (SFC) tool to troubleshoot missing or corrupted system files in Windows 7. SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary. Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should usually be your first troubleshooting step. He rises before starting Windows then I have to hit enter and it goes to Windows Try this answer and it can help you. and this is another one with the same problem. How can I get a copy of the file There are 7 possibilities for the hal.dll file and the installation of XP takes the right one to match your hardware during the installation of XP. That's why replace a bit difficult because you need to know which of the 7 on the XP installation CD you need. You can guess and try things and you might get lucky, or you can try them all. That would take some time and probably be frustrating and you would need a CD bootable XP installation genuine to start the trials and errors. Replace the hal.dll file becomes even more difficult, because most of the people do not have a genuine XP bootable installation CD, even if they wanted to replace the hal.dll file. If you really want just a copy, you can understand that one you need or just copy the one you already have. Unfortunately, the Microsoft Answers don't ask for enough information when a new question is asked to provide you with a good idea for your problem not specified. For all that is your problem not specified, you will need to provide additional information. If you see the message that your hal.dll file is missing or damaged, the chances are that the file is not really missing or damaged... Windows XP just can not find the file. Fix hal.dll "missing or corrupted" message is usually not too demanding and has nothing to do with the replacement of the file. Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time. It might even be possible to solve a problem in a single response when enough information is provided. Please provide additional information on your system: What is your system brand and model? What is your Version of XP and the Service Pack? Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc.. The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.) The afflicted system has a CD/DVD drive work? You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)? What you see you don't think you need to see? What do not you think that you should see? If the system works, what do you think might have changed since the last time it did not work properly? file HAL.dll It's extremely likely that you will need to replace the hal.dll and since there are seven files on the XP installation CD that will extend into hal.dll, which would you choose? It depends on your hardware, but it is extremely likely that the problem (did I already say that?). I've never had to replace a file hal.dll for this problem. The real problem is most likely that XP just can not find the file because of a file system corruption or a file c:\boot.ini afflicted. For this error, I would always be first boot from the XP Recovery Console and sometimes run a chkdsk-r that will fix things right to the top. If the chkdsk /r is clean and you have the same problem, and then re-create your c:\boot.ini file but rename the old one first so you don't build on top of those afflicted - this tidbit is absent from MS KB article that assumes too. You can do all this in the XP Recovery Console, but do go through these methods in this article and see how you go. For example, method 1 will not work if your system does not start. You may have more luck with other "methods". If that doesn't work, then I suggest to provide a little more information about your system: Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system. Not knowing the basic information a problem prolongs the frustration and the agony of these issues. Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible. Provide information on your system, the better you can: What is your system brand and model? What is your Version of XP and the Service Pack? Your system have IDE or SATA disks? Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc.. The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.) The afflicted system has a working CD/DVD (internal or external) drive? You have a real installation CD bootable XP which is the same Service Pack as your installed Service Pack? (this is not the same as any recovery CD provided with your system)? If the system works, what do you think might have changed since the last time it did not work properly? I have win xp and that you have installed the latest updates 7 system - now I can't start. I get the message: Windows didn't start because what follows is missing or corrupted
I don't have a CD system - which can do? everything I read said to alter, copy, etc., but since I cannot start, I can't do it all. Help me please, thanks XP trying to tell you that it cannot find the file. It is extremely likely that the hal.dll file is really missing or damaged (XP just cannot find it). You should not have the Windows XP installation CD for this problem. It is very unlikely that the manufacturer will be able to you provide a XP installation CD, but contact them if you wish. What would you do if YOU were the manufacturer? Communicate with yourself? The instructions in this link to replace the hal.dll file are bad, bad, bad. If you follow them, you will need to replace the hal.dll file, but it will not be the correct hal.dll file. There are 7 possible hal.dlls on the Windows XP CD, and check out the generic hal.dll file won't be one you need unless you run a virtual machine. Clearly, the technical support engineers have never actually solved this problem. Notice that the thread is not marked as 'response' by the original poster, but by a moderator of the Forum after a period of 5 to 10 days of inactivity where some MSE posted a link to a few articles in the KB (this is how things work here). You should start by making a bootable CD of XP (no XP media required) Recovery Console and run chkdsk /r first just to be sure of the file system NTFS is not damaged. Then see if you can start after that (maybe it won't). THEN, you must use the Recovery Console to rebuild your boot.ini file. I would like to rename the file c:\boot.ini first then you don't rebuild on top of the afflicted (this part is missing from the article). I can't understand why Microsoft support engineers seem unable to display instructions to make a CD of bootable XP Recovery Console. Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton and Spybot. Here's how to make a CD of bootable XP Recovery Console: If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget. This is not the same as recovery disks that might have come with the acquisition of the system store. You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD. The ISO bootable image file you need to download is called: xp_rec_con. ISO Download the ISO from here: http://www.mediafire.com/?ueyyzfymmig Use a new CD and this simple and free program to burn your ISO file and create your bootable CD: Here are some instructions for ImgBurn: http://Forum.ImgBurn.com/index.php?showtopic=61 It would be a good idea to test your bootable CD on a computer running. You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again. When you start on the CD, follow the instructions: Press any key to boot from CD... Installing Windows... going to pronounce. Press 'R' to enter the Recovery Console. Select the installation that you want to access (usually 1: C:\WINDOWS) You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the C:\Windows folder that you see in Solution Explorer. The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc. For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console: A good idea before you start things must first verify the integrity of your file system by using the chkdsk command. In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player. Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command: CHKDSK C: /r Let chkdsk finish to correct the problems, he could find. It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime. You must run chkdsk/r again until it finds no error to correct. Remove the CD, and then type "exit" to exit the RC and restart the computer. You have not to set the BIOS to boot the disk HARD since the CD won't be. If you still have the same problem (likely), then the value rebuild your file c:\boot.ini as article says here: I downloaded a virus on my computer that wouldn't let my computer startup message wasn't
Paul_652 What a mess! I was trying to stop some HP programs to start when I start my desktop computer. I did the following: start > run > msconfig. Click on startup and unchecked HP four applications. Restarted my desktop computer and immediately had a black screen with the following message: The window could not start because the following file is missing or damaged:
Please reinstall a copy of the above file I can't do anything in Safe Mode or one of the other options. Cannot re - install Windows XP Home Edition because Windows or Internet Explorer 8 will not run. Only the black screen and the message mentioned above. I use a desktop Dell Dimension 8400 computer. [1] Just finished everything on your step 10. I went with the Microsoft Security Essentials. [2] I still need to download site driver Dell trying to correct this "floppy seek failure pilot 1,2 and 3 not found: ATX, SATA 1, 2 and 3' problem" [3] I just got e-mail from Microscoft response that the thread that I created has been deleted, so I answer to you of a past replica. Wanted [4] Thank you for your time and patience to help me. Is there something else to do for me, you can recommend? A1. Wise move IMHO. The computer seems "snappier" now? A2. I can't imagine that another owner of a Dimension 8400 (or 4800?) has not encountered this problem before. Discover (i.e., search) the Dell office equipment forum: http://en.community.dell.com/support-forums/desktop/f/3514.aspx. If necessary, start your own new thread (registration required). A3. If you start another thread on the computer, I have posted a reply to this & you asked to publish a follow-up replies to your original thread. [?] A4. Welcome & thank you for your comments. In fact, there is something else you may need to do: it turns out that KB2607712 is replaced by the KB2616676 in Vista & Win7; Windows XP needs to have both installed [despite the mention you referred in your post on September 14, above] !!! => So if Update for Windows XP (KB2607712) is NOT listed in Add/Remove Programs, you will need to manually download/install a revised version [long story, involved - you don't want to know]: ~~~~~~~~~~~~~~~ 1. open Internet Explorer to http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27244 & click on the button CONTINUE. 2. after VALIDATION, download the installer for KB2607712 & save it to your desktop - NOT run again! 3. close all open applications (that is, anything with an icon on the taskbar). 4. double-click on the file that you saved in #2 above to install the update. Follow all the instructions (reboot required). 5. check that the Update for Windows XP (KB2607712) is now listed in Add/Remove programs. =============== PS: If you have NO Office or Silverlight or any installed Windows Live Essentials application, I can tell you how to start your Windows XP computer & full load more quickly. Help start the old computer system32/hal.dll error not installed bugs not working- I want to transfer files from your old computer to new computer with Vista Easy Transfer. In an attempt to start former computer, received the system32\hal.dll error. I followed the instructions to fix proglem reboot, press / hold down f8, etc., but that has not worked. I could reinstall the operating system Microsoft Windows XP Professional, including Service Pack 1. But if I do then I lose all files, documents, photos, everything from the old computer... at least, I think it's going to happen. Can you tell me what are my options to ensure that I don't lose any of my data. This behavior can occur if one or some of the following conditions are true: By default in the [Boot Loader] section of the Boot.ini file is missing or invalid. Windows XP is not installed in the location specified in the Boot.ini file. The Ntoskrnl.exe file is missing or damaged. The path of partition in the Boot.ini file is not set correctly. General failure. The article below should help you solve this problem. Error message: "Windows did not start because of a configuration of the disk of the computer problem. http://support.Microsoft.com/kb/314477 You must have a Windows XP installation disk to perform the steps listed in the article above. Hope this helps Post back if necessary ___________________________________________________________ If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly. I have a problem with my desktop computer. my computer is HP Vectra, Intel Pentium 3 and the operating system is Windows XP Professional. The problem is: the following file is missing or corrupt: \system32\hal.dll Change the first boot of your dvd writer/rom device! http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/ http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm What can I do with this message: Windows didn't start because the following file is missing or corrupt:
Thank you In Windows XP: http://pcsupport.about.com/od/findbyerrormessage/a/missinghaldll.htm In Windows Vista & 7: http://pcsupport.about.com/od/errorh/a/HAL-dll-missing-Windows-7-Vista.htm In addition, if the file is actually missing, you can try to boot from a UNIX / Linux Live CD like Knoppix and add/replace the file manually with a file from another PC running THE SAME VERSION OF WINDOWS! If you are not good with computers, you should ignore this option because it could cause serious problems. If you still want to try, and there is a hal.dll file in
Let us know if it works. Portege R600 - y at - it a radio available internal broadband? Our previous laptops had internal radios from Sprint for access to broadband.Sprint will give us external modems for the R600, but it would be great if there was an internal option - one less gadget to drag around. Is there such a thing? Thank you! How to program for dynamic field point? I'm programming an application using Fieldpoint. On the computer on which I am coding, the communication port used for the CFP is COM3. However on the deployment computer, the communication port to use is COM1. What is the easiest way to NOT have the HP Laserjet P1006: print streaks on a b/w laserjet printer I got this free Laserjet P1006 and it has vertical lines on the page. See attachment. How can I clean printing? can I delete window8.1 and install windows 7 on my HP Stream 13.3? I have a HP desktop computer and a HP Pavilion dv7 laptop windows7 and I just bought a laptop HP Stream 13.3 windows 8. I would like to remove window 8.1 and install window7 my wife like windows 7. Thanks to Ruth and Tom Open tabs are not get combined into an icon of Internet Explorer. Original title: the taskbar buttons I am running Windows 7 with IE 11. Since then do a reset on IE, the buttons on the taskbar for all open tabs are tiled on the taskbar. Previously, there was only one button, which, once clicked went to the current Similar Questions
2 are there any changes or updates made on the computer?
3. are you able to read the DVD by cancelling the error message?
4 is the issue limited only when you try to play the DVD?
http://support.Microsoft.com/kb/929833
AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
http://support.Microsoft.com/kb/330184
ACTIONS:Maybe you are looking for