I can't boot after installing the latest win xp updated system - missing or damaged/system32 hal.dll
I have win xp and that you have installed the latest updates 7 system - now I can't start.
I get the message:
Windows didn't start because what follows is missing or corrupted
I don't have a CD system - which can do? everything I read said to alter, copy, etc., but since I cannot start, I can't do it all. Help me please, thanks XP trying to tell you that it cannot find the file. It is extremely likely that the hal.dll file is really missing or damaged (XP just cannot find it). You should not have the Windows XP installation CD for this problem. It is very unlikely that the manufacturer will be able to you provide a XP installation CD, but contact them if you wish. What would you do if YOU were the manufacturer? Communicate with yourself? The instructions in this link to replace the hal.dll file are bad, bad, bad. If you follow them, you will need to replace the hal.dll file, but it will not be the correct hal.dll file. There are 7 possible hal.dlls on the Windows XP CD, and check out the generic hal.dll file won't be one you need unless you run a virtual machine. Clearly, the technical support engineers have never actually solved this problem. Notice that the thread is not marked as 'response' by the original poster, but by a moderator of the Forum after a period of 5 to 10 days of inactivity where some MSE posted a link to a few articles in the KB (this is how things work here). You should start by making a bootable CD of XP (no XP media required) Recovery Console and run chkdsk /r first just to be sure of the file system NTFS is not damaged. Then see if you can start after that (maybe it won't). THEN, you must use the Recovery Console to rebuild your boot.ini file. I would like to rename the file c:\boot.ini first then you don't rebuild on top of the afflicted (this part is missing from the article). I can't understand why Microsoft support engineers seem unable to display instructions to make a CD of bootable XP Recovery Console. Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton and Spybot. Here's how to make a CD of bootable XP Recovery Console: If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget. This is not the same as recovery disks that might have come with the acquisition of the system store. You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD. The ISO bootable image file you need to download is called: xp_rec_con. ISO Download the ISO from here: http://www.mediafire.com/?ueyyzfymmig Use a new CD and this simple and free program to burn your ISO file and create your bootable CD: Here are some instructions for ImgBurn: http://Forum.ImgBurn.com/index.php?showtopic=61 It would be a good idea to test your bootable CD on a computer running. You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again. When you start on the CD, follow the instructions: Press any key to boot from CD... Installing Windows... going to pronounce. Press 'R' to enter the Recovery Console. Select the installation that you want to access (usually 1: C:\WINDOWS) You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the C:\Windows folder that you see in Solution Explorer. The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc. For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console: A good idea before you start things must first verify the integrity of your file system by using the chkdsk command. In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player. Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command: CHKDSK C: /r Let chkdsk finish to correct the problems, he could find. It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime. You must run chkdsk/r again until it finds no error to correct. Remove the CD, and then type "exit" to exit the RC and restart the computer. You have not to set the BIOS to boot the disk HARD since the CD won't be. If you still have the same problem (likely), then the value rebuild your file c:\boot.ini as article says here: Tags: Windows Windows 10 can not boot after installing the Bootcamp drivers I have an iMac late 2013 (21.5 "), and I just got 10 Windows so that I can install it using bootcamp. I spent a good part of two days trying to get Windows to work with installing bootcamp, but no matter what I do, the result is always the same. If I let bootcamp install its driver (as he wants when you start first in 10 Windows after installation), Windows will crash before loading fully at the next startup. He comes to see the windows logo pop up with the loading circle spinning around for a second, until what the circle all the sudden stops. After that, it restarts and I hear the iMac from sounds (this much quieter time for some reason any) and then it does the same thing. The third time that it restarts, it starts the automatic recovery mode and I get caught for the advanced boot menu. After letting Windows reinstall itself, it works fine except that it lacks some of the display driver (I can't adjust the brightness) and I also can not use the function keys on my apple keyboard, or the magic mouse at all. I tried to reinstall OS X El Capitan and then repeat the installation for Windows. I tried with the driver OS X Downloads for me in Bootcamp (version 6.0), and I've also tried using those newer that Apple offers for download on their site (Version 5.1.5769). All attempts of the result of facilities Bootcamp in crash of boot even when Windows is restarted. Windows is still usable, I just think it would work as it is supposed for a Mac wish. Why the bootcamp drivers break 10 windows? Has anyone else had a similar problem? If so, any suggestions? Thank you BC 6.x drivers are more recent and recommended for Windows 10 models 2013 and following. BC 5.x drivers are older and meant for W7/W8.1. Specifically, in your case, 5.1.5769 are not valid drivers for your model. iMac 21.5 inch 2013 requires such Software in Support of Boot Camp 5.1.5640 indicated in the installation of Windows 7 and previous versions on your Mac with Boot Camp - Apple Support . Publication date: February 11, 2014 File size: 925,6 MB The system configuration required It is not a problem of drivers BC. W10 requires updates that it shouldn't. Please see Windows crashing in 10, but know not why. as reference. I suggest that you follow the steps described in the linked discussion and test. I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation? After installing the latest updates, my screen on large icons, screen too big for my moniter the only way of difficulty was to uninstall updates. After installing the latest updates, my screen on large icons, screen too large for my moniter the only way of difficulty was to uninstall updates. Sounds like something in the update causes a conflict with your video driver or change the resolution settings. If the problem persists, try right click on an empty area of your desktop and select properties to open the display properties dialog box. Select the settings tab. Look to see if the screen is correctly identified and if the resolution seems correct. If you spot something wrong, change to the correct setting. If everything looks correct, you can try to change the resolution to see if that can solve the problem. You can also check the website of the manufacturer of your graphics card to see if they have an updated display driver. Updates of the operating system only sometimes work correctly if you have the latest version of the drivers for the various components. If all else fails, you can uninstall the update one that is causing the problem and mark do not show you this update again in Windows updates. Doing so will be considered a last resort - especially if the update in question is one of the security updates. Vista Business Service Pack 2 I installed the latest vista updates today. Three "important"; an option. The optional parameter was an update of bluetooth toshiba. We were talking about "platforms" that made me uncomfortable so I went to Microsoft and after reading it, I decided - based on little understanding - it was probably necessary. I turned off the computer and when I rebooted, it did not start. I managed to get it started; I run scandisk; now, when it starts to get a series of errors from Adobe for various Adobe programs that I installed on the machine all seem related to the "Automatic Setup" (or boot, I don't remember exactly. I tried to re - install Acrobat and I get an error message that the 'source' is not available, and to ensure that it is - despite me using the installation disc, so I guess that it refers to the 'source' in Vista. Outlook does not start. He told me to use scanpst.exe to analyze the .pst files, but they seem to have disappeared. I have tried other products of office except Explorer who started without problem. I can't use restore because it says that the disc is damaged and needs to be checked. Any ideas are appreciated. Uninstall the update for bluetooth. Never use Microsoft device driver updates. To avoid this does not happen, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator. Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228. While in the command prompt, type chkdsk /f /r and enter and let it run. It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause. Who can release the OS to do a system restore or other recovery options. Do you know when this problem started (probably with updates)? Try a system restore to a point in time BEFORE the problem started. Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. Don't forget to check the box to show more than 5 days of restore points. If the first attempt fails, then try an earlier point or two. NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.
If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc. Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html. You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD. If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.
If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking). Then we will check some of your system files: If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer). Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html. If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone). Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884. Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work. You can have a lot of updates to re - install (including all you need to remove service packs). If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html. I hope one of these procedures can solve your problem. If this isn't the case, after return and we will try something else. Return message anyway so we know how it turns out. If none of these steps work, transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in updating the questions will be more than happy to solve your problems. Don't forget to tell them what updates you downloaded and installed, and what steps you have already done to try to solve the problem. Good luck! Lorien - a - MCSE/MCSA/network + / A +. Cannot access internet after installing the latest Windows Update * Original title: Question access to the internet after you have installed the latest update Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem. I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install. I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet. Can you please tell how can I install the update it will affect my ability to access the internet? Hi Victoria,. Please help me with the following suggestions: 1. using modern Internet Explorer user interface or Desktop Internet Explorer? 3. What is the number of the kb article that is causing the problem with the internet after installing the update? 4. are you referring to Windows Update (KB2919355) 8.1? Windows Update: Frequently asked Questions see (how know what are updates http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ Method 1: After the update is installed, configure the computer to boot and check if you questions persists: How to perform a clean boot in Windows http://support.Microsoft.com/kb/929135/en-us Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting» Method 2: Click on the link below to troubleshoot if the internet explore does not work: Why can't connect me to a network? http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8 Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer. I hope this helps. Answer please if you have any additional questions with Windows. I just bought a MBP of 2013 (MacBookPro) renovated with OSX 10.9 (Mavericks) and want to update my Safari (version 7.0.5) the latest version of Safari. I tried to download Safari from Apple's site, but he said that I would also install the current OSX (10.11 El Capitan) as well. I want my MBP to stay on OSX 10.9 (because it is the last operating system that supports Adobe Creative Suite CS6). Can someone advise me on where I can download ONLY the last Safari? Thank you Steve You cannot run the last Safari on Mac OS 10.9. It requires the latest Mac OS (10.11) You can create a new partition and install the latest OS above and use it. Then the Mavericks partition boot when you want to use Adobe Creative Suite. Unable to restore the last session after installing the latest version of Firefox + auto install I still need help on the following points: After you have installed the latest version of Firefox "restore previous Session ' is always grayed out, how to make this work? How to avoid auto installation of Thunderbird and Firefox versions updates? Thunderbird installed the latest version, when I clicked "On Thunderbird" to check the latest version. I had no choice, it just started installation. Well, I think that this is a problem when you lose history that you couldn't lose. But I hope that it was only once. The computer hangs after installing the latest updates I installed the latest windows updates. Restarting my computer later, since hanging / freezing for half a second every 2-3 seconds. I notice it more while trying to move the mouse or by watching a video (someone who speaks seems to stutter on about every 5th Word). The computer clock has also been slowing. He gets about 10-12 minutes behind before he catches upward. When I look at the Task Manager, I do not take a lot of cpu. Restarting the computer didn't help. I've never had this problem before. Any suggestions? Often by rebooting the computer solves an immediate problem. Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on that more than 48 hours ago. You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important. A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer. Hope this helps, Gerry Cornell 0 x 80042302 on the restoration of the system after installing the latest version of Norton 360. Original title: 0 x 80042302 on the system restore, no service.msc found - what's the latest Looked through all positions and they seem to be quite old. someone out there please help, my husband drives me crazy with his laptop, he is unable to do a system restore and still get the above error message. Hello Thank you for the update. Good to know that you are able to resolve the issue and thank you for sharing the information. Let us know if you need help with Windows related issues. We will be happy to help you. Cannot start after effects CC 2015 or first CC 2015 after installing the latest updates? First CC 2015 and after effects CC 2015 stopped when I installed the latest updates on Windows Pro 64-bit 10. 0xc0000142 error code Hi Shawn, First CC 2015 and after effects CC 2015 stopped when I installed the latest updates on Windows Pro 64-bit 10. 0xc0000142 error code Update for Premiere Pro CC 2015 (9.2) and after effects CC 2015 (13.7) for a fix. Thank you Tecra A7: Two unknown devices after installing the OS Win Hi all (1) device type: other devices (2) device type: other devices I installed the latest Intel Chipset drivers and no luck. Perhaps one of them is the sound card (although I have installed the drivers as well) and one of them HARD drive Protection (that I have no intention of installing anyway). If someone can confirm what they are it would be much appreciated. Kind regards Hello Installing drivers and utilities Toshiba should be made in the right order. The Tecra M7 also supports the protection of the HARD drive. Normally you will find it at the last position under "Audio, video and game controllers" in Device Manager. I found this document Toshiba how to identify an unknown device: Maybe it helps. A couple of weeks ago, I upgraded my iPhone version 9.2 and iTunes on my Macbook Pro version 11.4, and now I can't get my iPhone to sync with my Macbook Pro. Whenever I connect the two devices, I get an error message that says: "the 'IPhone of John' iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.com to download the latest version of iTunes. " I tried a lot of things, starting with resets hard and finally erase all data and settings of my phone, but without success. I would use an iTunes backup, but he refuses to communicate with my iPhone. Is anyone familiar with this problem? Thanks for your time. You you make sure that you run version 12.x iTunes on your Mac? If your OS x cannot run iTunes 12, you cannot synchronize your phone more set to update to iOS 9.x System randomly crashes after installing the latest update of Windows 7 I am operating Windows 7 OS on 64-bit pc. Since the automatic updates of Windows on 01/10/13, I experience a freeze randomly the system on a range of applications. I tried other updates and basic system maintenance tasks are completed, but the problem persists. Can you help me please? Hi Stuart, I see that the computer hangs at random after installing some updates. I'll help you with this problem. 1. What is the brand and model of the computer? 2. what security software is installed on the computer? 3. which windows update has been installed recently? Let us try these steps and check the status. Method 1. Start the computer in safe mode with network and run a full scan of computer viruses. Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free. Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. Method 2. Start the computer in a clean boot state, and check the status. A clean boot to test if any element of service or third party application startup is causing this issue. How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 and Windows 8:http://support.microsoft.com/kb/929135 Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup. Method 3. I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833 Respond with more information so that we can send us your request in an appropriate manner. Plugin Flash will not install even after installing the latest version of Flash When I go to a site that contains Flash content, it says "a plugin is required to view this content" and there is a link to install the plugin. In addition, there is a message at the top of the page that says "additional plugins are required to display all the media on this page" with an option to "Install missing Plugins". I click on the link to install the missing plugin, and a dialog box appears that says "the following plugins are available: ' and 'Adobe Flash Player 11.0.1.152' lists with a checkbox next to it. The box is checked, and I click on 'Next' to install. He's going through the motions and then told me that 'no plugins were installed. There is a link to manually install the plugin, which brings me to the Adobe's Flash download page. I unchecked the box for pair McAfee Security download and downloaded the latest version of Flash (to be honest, I downloaded actually this exact version even about 10 times today). The dialog box appears, I save the file and once it has downloaded, open the folder that contains (my downloads folder). I then, close all programs (including Firefox) except for the folder of Windows Explorer I want to run the installer from. I double-click the Flash Installer to perform the installation. The installation process is complete, the installer tells me that the download is successful, and my browser opens upward with a message "Successful Installation" from the Adobe Web site. Yay! My installation is successful... Orrrrrr not. Return to the page with the Flash media - always have a message saying that I need the plugin. Try to download plugin once again... no dice. THEN, I go to "Manage my Add-ons" thinking maybe I need to activate the plugin. There is no plugin Flash (or Shockwave) listed on any of the menus - it is as if it does not exist. I downloaded the latest version of Java because I read somewhere that Flash requires Java work; I installed the "add-on Compatibility Reporter" so I could force Java to be enabled. It made no difference whatsoever, best I can tell. I also went to the Adobe homepage where you can see what version of Flash you use (http://www.adobe.com/software/flash/about/) and it does not even show that I have installed Flash. In Internet Explorer, it shows that I have installed Flash, but it's the previous version (but this is probably due to the fact that I downloaded Flash in Mozilla, not IE, and they use different modes in each browser - so an update that you download from a browser does not necessarily apply to the other browser). So in summary: I don't know what on Earth is wrong here, but I'm about as frustrated that I've never been in my life. I don't know why the installation of Adobe Flash is said she is successful (it sleeps for me?), but there is no plugin appear in my menu manage add-ons, and I googled all the possible combinations of content in this message and have not found a solution that works yet. It seems that you have found the 64-bit version of Flash. Is your Windows 7 64-bit? I did read your entire post, but NPSWF64_11_1_102.dll which is Flash 64-bit; This turns into a novel when it should have been a short story. First, uninstall all Flash your system by following these instructions from Adobe Second, get the 32-bit versions of the following. Why? Unless you use an unofficial Firefox 64-bit version, the regular Firefox is a 32-bit browser and needs 32-bit Flash.
Third, test Flash on websites where you had a problem before. If this does not work, my last suggestion for you is to follow the instructions from Adobe for troubleshooting. I don't know what's happening with your system, which could possibly be the cause of the problem. If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum. Have tried for almost an hour and a half to find someone to answer chat and adopted a few times. Cannot access my profile to work after yesterday, I downloaded 4.0. Telling me I'm not online but I'm not, and the box is unchecked. Have tried restartin The new version of Firefox is compatible with all Mac computers? My last download says it isn't. I have MAC OS X 10.4.11 Re: Windows 7 drivers A300-1NS SP Hey,. I bought an A300-1NS a year ago, the best laptop I could ever want, is worth much more than it cost and since then.I recommend TOSHIBA for those wishing to buy a laptop perfect at minimal cost. I have a question I need to find a solution for:I Hi Peter Please could you confirm that the upgrade to Version 3 in December will give us a Mlut to the viewfinder so that we can use Slog 2 and S-range with something like a Rec 709 image in the viewfinder. It would be without the need of a raw Viewe G62X-400 (ld642av) does not load, power button ribbon cable could be damaged. Laptop of the friend's daughter had a problem with the cable going to the LCD. When opening it I noticed a few missing screws of the machine near the back and the middle. I disassembled and made the display cable stressed I guess because the flex of
AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
http://support.Microsoft.com/kb/330184Similar Questions
The first thing to do to solve the problem is to try to install each of the updates one at a time instead of let Windows Update do several updates together. If you're lucky, the problem can not ride again. If so, you'll know at least update is the cause of the problem.
32 bit
2007-12-office
Acrobat 9 Pro
Adobe Design Standard CS4
Sony Vaio
Shortly after, Acrobat 9 Pro wasn't working anymore. The computer asked me to restart after installing updates, but I have done a couple of things, including some e-mail. During the attempt to send e-mail until I turned off the computer, Outlook flash he has been restarted and then the icon to install flash and then I could come back and type until the sequence started.
2. your computer is in a cable or wireless internet connection?
been installed?)
I don't understand the solution on this site. I'm a basic user and never used another thing but windows.
Kevin
Recently bought an A7 and was convinced all the preinstalled software Toshiba slowed things. Managed to fresh install windows, then use Toshiba Apps Installer to restore items that I really wanted to. Everything went well and the computer is about two times faster now. However, I have two following unknown devices:
Location: on Intel(r) 82801GBM (ICH7-M) LPC Interface Controller - 27 b 9
Hardware ID: ACPI\IFX0102
Places: On system compatible ACPI Microsoft
Hardware ID: ACPI\TOS620A
Christin
The chipset utility must be installed at the beginning and then the common modules.
You must use the form chipset the Toshiba site.
http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htmMaybe you are looking for