How to format a disk for installation of win 7

Similar Questions

• Formatting of disks for use with Windows

  Hello

  I would like to know what disk format works best for the use of storage with El Capitan and MS-Windows-10 drives.

  I don't like on the permissions.

  This storage drive will essentially serve for storage of files, movies, music, photos. No apps or the OS file.

  I have a dual boot systems and I would like to be able to use and share this disk of OS - X or MS-Windows.

  No NTFS disk

  No extended the disk log file system

  Any necessary file permission

  FAT32 or exfat32 is what I'm thinking. However works best?

  xFat supports files greater than 4 GB

  ith-Macs-and-PCs-without-third-party-software/ http://www.mactip.net/Guide-How-to-format-an-external-Drive-to-Work-seamlessly-w

• How many groups of disks for + DATA?

  Hi all
  
  Made Oracle recommends that a group of disks asm wholesale/shared for all databases?
  In our case we're going to 11.2 and 10 g rac against 11.2 ask...
  
  Am I right to say that I need to set the compatibility of the asm to 10 in order to be able to use the same disk?
  It is a good idea? Or should I create another group of disks for the db 10g?
  I guess that there are features that are not available when compatibility is reduced to 10g...

  Yes, it is possible but not recommended because the ASM would distribute the e/s in such a way to disc 1 would get 4 times requests for disk 2, which is probably not what you want in terms of performance.

  Bjoern

• How can I run WP51 for DOS with Win 7?

  How to make qp51 for DOS with Win 7? This is a 16-bit program and will not work with the Simulator XP, which comes down to 32. I have DOSBox, but am stuck on getting wp51 to run.

  16-bit applications are not supported in Windows Vista or Windows 7, please see the following article.

  Article number: 926657 - some 16-bit DOS programs and the command prompt does not work in mode full screen in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/926657
  
  If DosBox or Virtualbox is not running, then you may be out of luck.
   
  Sincerely,

• Lost the disk for Installation of Windows Vista - can I use my friends with my product key?

  I am running Windows Vista on my computer at home, but I had this for a few years, and he began to have very slow, so I decided to completely erase the hard drive, now I know how to do this, but I need to re - install the OS when I'm done, but I've lost my Windows Vista installation CD , even though I still have my code/product key - it would be OK to use my drive of Windows Vista to friends with my product code?

  I tried this article: http://support.microsoft.com/default.aspx/kb/326246and he do not seem to answer my question - I'm trying to replace my copy, I just want to know if it is OK to use my friends?

  Yes.

  As long as it's a DVD from Microsoft and not a computer Manufacturer'e Recovery DVD.

  Read the information below.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How to format the disk with Windows Vista to install Windows XP

  Hi, I would like to format my laptop and put Windows XP, but when I tried to start using the XP cd does not recognize the HARD drive, the type of my HARD disk is SATA
  I think that I need to download specific drivers, but I found no drivers on the toshiba Web page
  Thank you

  Hi Bertoni

  Sorry, but I must be honest now: I am ready to help, but I hate it when someone write about problems, but not write a which model of laptop. How to check the download page and you give any information when nobody knows what model of laptop you have?

  Let us know what model of laptop you have and we can continue the discussion. Otherwise visit category where your laptop and I am 100% sure that you will find the right answer it?

• How can I switch platform for installation of Windows for Mac OS 10?

  Hello.

  I installed CC (charged monthly) on a win10 platform. During that time, I owned an iMac and want to switch to the installation of Win10 for Mac OS. Installation of Win10 is no longer necessary. How can ist of the question, I do this.

  Kind regards.

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -An individual account is for one person and may not be shared with anyone else

• How to make hard disk for the guest operating system diffferent?

  I have a HP DL380 G7 with a RAID 1 on two hard drives of 2 TB. In the vSphere Client, when configuring the virtual machine, how I attributed part of the disk space to my virtual machine if it appears as "D" drive for storage?

  To add a new virtual disk, choose "Create a new virtual disk" in the wizard.

  André

• Concepts: how much writing on disk for a single update

  (I use 10.2.0.5 but I think that this applies to any version)
  
  After reading lots of documentation on Oracle I started to think how often Oracle 'written' for a single update statement.
  
  The following is correct?
  
  For an update statement:
  (1) the original data are written in tables UNDO space
  (2) this is protected by a write first to REDO log
  (3) the new data is written to the table space
  (4) this is also protected by an entry first in the redo log
  (5) after that fills in the redo log, it is copied to an archived log
  (6) at the time of the backup that Archives archiving log is also best once more
  
  So for a single update, I count at least six entries of the same data?
  It is probably what makes the robust Oracle.

  user12204556 wrote:
  (I use 10.2.0.5 but I think that this applies to any version)

  After reading lots of documentation on Oracle I started to think how often Oracle 'written' for a single update statement.

  The following is correct?

  For an update statement:
  (1) the original data are written in tables UNDO space

  Yes

  (2) this is protected by a write first to REDO log

  Yes

  (3) the new data is written to the table space

  No, your data still haven't write (immediately) to datafiles (your tablespaces logically). When point of control (when manually to CHANGE the point of VERIFICATION SYSTEM, SWITCH of NEWSPAPER, when the buffer cache is full, STOP IMMEDIATELY in backup database tablespace mode) then your blocks of data will apply to data files.

  (4) this is also protected by an entry first in the redo log

  Yes

  (5) after that fills in the redo log, it is copied to an archived log

  YesIn ARCHIVELOG mode()

  (6) at the time of the backup that Archives archiving log is also best once more

  YES.

  So for a single update, I count at least six entries of the same data?

  These are not same data! This is the mechanism of oracle database. Cancel the information generated immediately and ensure uniformity reading (to restore). Redo information just, contain no information. It comes to redo change agent who used methods of recovery (media and instance) and finally your data updates do not immediately write data by DBWR because files there is reason of performance.

• How to change a disk for HP Deskjet F4200 series for Windows 7

  Hello

  I have a HP Deskjet F4200 all-in-One series and a game disc upward for Windows 2000, XP, Vista, but now I have Windows 7, so I can it pass or will it still work ok on this system if I install it?

  Can someone advise please?

  In my view, that it is your printer in this case.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3746674#N183

  Download the Win 7 software and drivers for your operating system.

• How to stop the disk for Dell Dimension 9150

  Hi all

  I have a Dimension 9150 with a 145 GB HARD drive (officially 160 GB?). The HARD drive works well, but it makes a lot of noise. I'm ready to buy a new HARD drive, unless there are other solutions to try with this type of computer. I am a beginner on discs hard non-technical language would be highly appreciated :).

  Thanks in advance!

  
  

• How long will it take? Installation of Win 7 USB

  How long will it take to install Windows 7 on the computer I have now?

  PLUG
  Computer: Dell Inspiron 1545
  CPU: Intel Core 2 Duo T6500 2.10 GHz (Dual Core) X 86
  RAM: 3 GB (indicative value)
  Graphics card: Mobile Intel 4 Series Express Chipset Family
  Support for DirectX 11
  72.2 GB of space were used. 21.6 GB for programs and the rest for the Documents and the operating system itself.
  I already ran Upgrade Advisor Windows 7 and only a few programs (which I don't use) are not compatible with windows 7. How long will take to install Windows 7 Home Premium x 86 on this computer as an upgrade to a USB Flash Drive?
  I want the three year old Dell, so it can work better. I know someone whose computer has been upgraded to windows 7 (slightly older than this one) and he runs it is smooth like cream whipped over memory-hungry vista.
  I will be very happy if it will update install in less than 3 hours. An indication of the time would be greatly appreciated.

  Installation time can vary depending on factors such as the speed of the processor, memory and your data set (including your personal files, settings and installed applications that must be transferred during the upgrade. Some upgrades may take an average of 2 hours 25 minutes, but there has been cases of up to 20 hours.

  Resources: Performance upgrade of Windows 7:
  http://blogs.technet.com/chris_hernandez/archive/2009/09/02/Windows-7-upgrade-performance.aspx

  My upgrade to Windows Vista Ultimate x 64 to Windows 7 Ultimate x 64 took about 3.5 hours, but I had a large library of applications (8 GB), and a set of data, which was about 68 GBs, so it was understandable

• Special concerns for installation of WIN 7 Premium on HP Pavilion XP Office a1630n?

  Is anyone aware of any special instructions to install WIN 7 on my a1630n years 3 with XP installed? I bought a copy of WIN 7 at Staples retail. I backed up all my data.

  How can I easily find programs I have on the machine are WIN 7 compatible - such as Diskeeper, Quicken, various products of Symantec/versions?

  HI BOBiii,

  The Windows 7 Upgrade advisor will tell you what software and/or hardware may not be compatible with Windows 7.  You can download it here: http://www.microsoft.com/downloads/details.aspx?FamilyID=1b544e90-7659-4bd9-9e51-2497c146af15&displaylang=en

  Be aware that you cannot upgrade a Windows XP installation to Windows 7, and you will need to do a clean install.

• Qosmio G30-149: how to make partion on HARD drive for installation Qosmio Player

  Who can help... How to make partion on the new HARD disk for installation of QosmioPalayer of restore CD?

  Details: Qosmio G30 - 149, I've changed my disks hard two 100/100 for hard drives 320/320 and now in train to install QosmioPlayer.
  I tried a few ways to make partion.

  At the end and at the beginning of the 1st disk HARD, 2nd HARD drive.
  But all the time I was following the fault: "the recovery is not supported on this system.

  Please, who knows what to do?

  Wait a minute;

  I wonder about this error message:
  + "The recovery is not supported on this system." + "

  Are you using the original recovery of Toshiba CD (DVD) that were shipped with this laptop?

  Please note that you can only use the CD that have been designed especially for you, notebook series!

• How to format everything on UCS C240

  Hello

  After we finish of PoC, customers want format all hard disks.

  Is there anyway that we can do?

  We have 2 SSD, 6SAS disks.

  The OS was also ESXI 5.5

  I was trying to find a command on ESXI, however, I could not.

  Can someone tell me how to format all disks on this platform?

  Thank you.

  Jiyoung,

  As far as I know there are 2 different ways to achieve this.

  1. If the C series is integrated with UCSM, just create a strategy of scrub in the SP connected to the server and set it to YES. then restart the server and as soon as the discovery is completed. Dissociate the SP from the server and will lead policy scrub clean the hard drives.

  2. If the C series is a Rack Mount. Just remove or change the configuration of any other Raid Raid # except the one you already have. So who will wipe all the information stored in the hard disks.

  Please note ALL useful answers

  Jose Ch