How to generate emc seizes ESXi host

Similar Questions

• How can I migrate an ESXi host since a vDS in a vSwitch with NAS storage on vDS

  I need to move some on a vDS esxi hosts to a standard vSwitch to move a new vCenter ESXi hosts

  I have two 10 GB network adapters that manage the ports VM, NAS storage and vmotion.

  Is there a documented procedure to move a vDS in a vSwitch, particularly for migration from NAS storage to a vSwitch?

  Thank you

  Tom

  No, you will need to do this on a per-host basis.

  I really recommend doing one by one, not in a hurry and checking all the networking before you proceed to the next step. Example: after migrating the vmkernel interfaces, check on a ssh connection to the host if it can vmkping the NAS. Before you move all the virtual machines on the host to the switch std, move one and check if the VM networking continues to function. This will prevent errors and downtime.

• How can I move an ESXi host to another?

  Hello

  I have 2 ESXi hosts running on similar hardware. SSH is enabled on both hosts. I need to move all the VMs from one host to another. What will be the most effective way to do it?

  Most average effecitive: buy vSphere Essentials, configure vCenter, connect the two hosts, virtual machines turn off, do a right click and "migrate." 1 k$ for 3 hosts and vCenter.

  Less effective, but cheaper way: turn off virtual machines, copy VMs to an another ESXi, search for all data, made store .vmx files right-click and "add to the inventory.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• How to extract the selected ESXi host user name and the password in the web client of vSphere?

  Hi all.

  I'm developing a plug-in for the web client to vsphere. I want to communicate with the selected host of ESXi in my Java Service Layer and who needs the host user name and password.

  I don't know how to search the Flex user interface layer.

  ESXi credentials are not stored in the user interface layer, you must use the vSphere SDK Web Service on the coast of java.  See vim.host.ConnectInfo.

• How to communicate esxi hosts to vcenter

  Hi team,

  I just want to know how vcenter to communicate to esxi hosts?

  (a) the name of the officer responsible for the communication between the host esxi and vcenter

  Thank you

  Vinayak

  Hello vinayakshvinayaksh

  Talks of vCenter for esxi host using the VPXD that runs inside the vcenter server and also service vpxa on esxi host that acts as an intermediary service to take the request of vpxd and passing demand to pass that runs on the host esxi ultimately his spend making tasks (like turn a virtual computer to migrate a virtual machine and so on). vinayaksh How to communicate esxi hosts to vcenter

  Kindly mark it as useful or correct answer if that answers your query.

  Rgds

  Frédéric

• Find the ESXi hosts that aren't in clusters

  How can I find the ESXi hosts that are not in the groupings using powercli?

  As always, there are several ways to do so.

  Try this one

  Get-VMHost |where{$_.ExtensionData.Parent.Type -ne "ClusterComputeResource"} |Select Name
  

• How to generate the array Diagnostic Utility ADU for Esxi server

  How to run Diagnostic Utility ADU or HP Insight Diagnostics HP Insight Diagnostics table to collect the status tables and logs data FRO an Esxi Server

  How to generate the array Diagnostic Utility ADU for Esxi server

  Example:

  Download the package .vib here: http://vibsdepot.hp.com/hpq/feb2013/esxi-5x-vibs/hpacucli/hpacucli-9.40-12.0.vib

  and place it on a store of data seen by the host...

  Install it using the CLI:

  software esxcli vib install d vmfs/volumes //hpacucli-9.40-12.0.vib

  Now run it:

  ~ # cd/opt/hp/hpacucli/bin

  / opt/HP/hpacucli/bin # . / hpacucli

  HP Array Configuration Utility CLI 9.40.12.0

  Detection of controllers... Fact.

  Type 'help' for a list of supported commands.

  Type "exit" to close the console.

  => ctrl all diag file=/tmp/my_ADUreport.zip ris = on = on zip xml = on

  Generation of diagnostic report... done

  -Online output

  / opt/HP/hpacucli/bin #.

  my_ADUreport.zip in / tmp can now be downloaded from the host...

  It could be that useful...

  / Rubeck

• How to restart annex 5.1 ESXi host?

  Hello

  Any method of restart ESXi host 5.1 on the calendar? Thank you.

  Kind regards

  YMIM

  You can schedule the reboot of the ESXi host using PowerCLI.

  Install the PowerShell and PowerCLI module on any Windows System.

  PowerCLI start programs

  or, you can run the commands below on PowerCLI prompt to test.

  Then save it the script to run as the specific annex filename.ps1 and Windows Task Scheduler.

  SE connect-VIServer vlab-esxi2 - root username - password "password".

  $vms = get - vm | where {$_.} PowerState - eq "Receptor"}

  foreach ($vm in $vms) {Shutdown-VMGuest - VM $vm - confirm: $false}

  sleep 60

  Restart-VMHost-Force - confirm: $false

  See this post to know how to program a PowerCLI script.

  http://www.virtu-al.NET/2009/07/10/running-a-PowerCLI-scheduled-task/

• How to install and update the vm on linux systems tools and how to join an esxi host in domain

  How to install and update the vm on linux systems tools and how to join an esxi host in domain

  thanq very much boss

• How to upgrade an ESXi host from the command line

  Sorry for bumping an old thread. I'm new to ESXi. I'm under ESXi 5.5 build 1331820 and I am at a loss how to apply patches.

  Preferably, I would like to apply all the relevant patches through console (SSH). Can someone give me pointers how to do this? Thank you

  Moderator note (a.p.): branched to a new discussion of software patch to version 1331820?

  Welcome to the community,

  on how to patch a ESXi host from the command line, please see for example http://kb.vmware.com/kb/2008939

  Basically download you the latest hotfix package and install it using the command esxcli . That said, please make sure that your hardware is supported by the patch that you want to apply (see http://www.vmware.com/go/hcl). You can also do before installing the patch, is to do a "dry - run" to know what . VIBS are removed and which are installed by the patch. To do this add -dry - run to the esxcli command line.

  In the case where something goes wrong, you can revert to the previous state by pressing SHIFT-R , while the ESXi hosts begins the start-up.

  André

• How to check the NUMA on ESXi host node

  Dear team,

  I have cisco ucs Server Blade configuration below b - 200 m3. I want to know how to check the NUMA on ESXi host node.

  RAM: 192

  Socket 2 (8 cores).

  concerning

  Mr. VMware

  Unfortunately, it seems THAT NUMA is disabled hardware wise. You can only activate it via the BIOS setting.

• How to get the material status of ESXi host of external surveillance system?

  Hello!

  I've got hardware ESXi host information (for example, CPU, disk, etc.)

  that I want back outside a vCenter/ESXi for an external monitoring system.

  I really really slighty possible via Powershell saw...

  Thanks for your help!

  Hello

  the link that I commented, explian how to monitor the status of the ESXi hardware by using the cmdlets for powershell CIM 3.0.

  Not the virtual machines

  This, will you?

  Check this code from the link, you should notice that connects to an esxi host, not virtual machines:

  import-moduleCimCmdlets

  2	$ipaddress="10.20.177.15"

  3	$HostUsername="root"

  4	$CIOpt= New-CimSessionOption-SkipCACheck -SkipCNCheck -SkipRevocationCheck -EncodingUtf8-UseSsl

  5	$Session= New-CimSession-Authentication Basic -Credential $HostUsername -ComputerName $Ipaddress -port 443-SessionOption$CIOpt

  6	Get-CimInstance-CimSession$Session-ClassNameCIM_Fan

  Best regards

  Pablo

• How to remove an ESXi host using command line in putty

  Hi all

  I have a number of 5.1 ESXi hosts that are currently managed by the server vSphere.  The entire cluster and vSphere server must re-built and I need to work on how I can remove servers using PuTTY.

  vSphere server is not in operating condition, so I am unable to remove it through the GUI

  Thank you very much

  I have worked in related directly to each ESXi host and selecting the ESX host, in respect of the summary page, there is a link to dissociate it from vCentre server.

• How to reach esxi host 5 on storage area network

  I have a Dell PS6000E on my network.  I would like to create a volume on it and use it as a shared storage for a new configuration of esxi5 with 2 hosts.  The PS6000 already contains 2 volumes in use by other servers (physical).  To access the PS6000 via my regular local network hosts.  Is this possible, and is there a documentation on how to put in place?

  Thank you

  Welcome to the community - I guess you access the PS6000E are configured for iSCSI or NAS/NFS, you will be able to access as shared storage long ESXi hosts can reach the unit. Because ESXi hosts will not be able to share the LUNS in use by other servers, you're going to create a new LUN for ESXi hosts. This storage of ESXi - http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-storage-guide.pdf - guide that has information on how to configure your ESXi servers to access the storage.

• How to activate the CVS on a vm on an ESXi host esxi

  I could be missing something, but - how can I activate CVS on a VM esxi 4.0 running on an ESXi host.

  If the host is a real physical box - and I've activated VCA in the BIOS. I then created an ESxi as a vm on the host. In the BIOS, however I don't seem to see an option for VCA.

  This is for laboratory tests /- and I would like to have the opportunity to test the Vmotion in the environment...

  am I missing something?

  When I created the virtual machine of the esxi 4.0 - the operating system, I chose was another 64-bit... is it my problem?

  Thanks in advance

  Lol you can't activate CVS in a VM, period.  It requires VT-x/AMD-V.  Products VMware does not virtualize the hardware-assisted virtualization

  extensions of the physical processor (VT - x or AMD - V).  Thus, the virtual CPU does not support VT - x

  http://KB.VMware.com/kb/1003212