How to get several requests to return the standard XML

Similar Questions

• How to get several beep?

  Hello

  I want to get several beeps output if a comparison condition gives output as true.

  Can someone tell me how to get several beep?

  Put the beep function in a loop with a small wait for the statement.

  

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• Try to play a movie but I have WMP cannot play the file how to get to play or delete the Xvid codec to play?

  How to get to play or delete the Xvid codec to play? Movies in AVI format, I converted it to WMP, but he won't play again

  No guarantee but maybe you need the XviD Codec.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/

• How to get distinct records by using the ListAgg OBIEE report function?

  Hi all

  I get a correct result as mentioned below. But I don't see duplicates in my result here, in my example, I get duplicate for the name of the employee 'Pat '. So how to get Distinct values by using the LISTAGG function?

  Data set of sample with the Department and its employees

  Service employee

  ----------      ----------

  Marketing Michael

  Pat of marketing

  Pat of marketing

  Pat of marketing

  Purchase of Den

  Purchase of Alexander

  Purchase of Shelli

  Purchase of Sigal

  Guy of purchase

  Purchase of Karen

  Using the ListAgg function, we can convert it to:

  Employees of the Department

  -----------     -------------------------------------

  Marketing of Pat, Pat, Pat, Michael

  Purchase of Sigal, Shelli, Karen, Guy, Den, Alexander

  I tried a lot of things, but I'm not able to understand how exactly this can be achieved, if anyone has any idea or suggestions please do share, thanks in advance.

  After much research, I found the solution & I want to share what he finds very useful, we can create SQL logic in the Advanced tab, as below and after you click Rescan, and then you will get your desired results.

  SELECT saw_0, Evaluate_Aggr T1.dept ("ListAgg(%1,'' & '') intra group (about 1%)") ("as long as VarChar (1000), T1.emp) saw_1 FROM)

  SELECT 'emp_dept '. "the Department dept,

  'emp_dept '. "' employee ' emp

  IN THE "DOMAIN".

  GROUP BY dept, emp

  ) T1 GROUP FROM T1.dept ORDER BY saw_0

  Also note here that we have good anti-aliasing for columns parent (ex: saw_0, saw_1), another by mistake oracle bi server.

• How to get Camera Raw to recognize the new Nikon D500 camera raw files?

  How to get Camera Raw to recognize the new Nikon D500 camera raw files?

  Devices supported by Adobe Camera Raw

  The D500 has been supported since camera 9.5 Raw which is only compatible with versions of Photoshop CS6 and Cloud.

  What version of Photoshop are you running?

• How to get audio to play on the timeline by rubbing through

  How to get audio to play on the timeline during the treatment, the clip is not cut, clip does not display an audio wave, looked through the help did not answer. When the clip is imported without options rise so uncertain where the issue is, any help is greatly appreciated, ty

  There is an option in the Preferences / Audio: audio playback while rubbing.

• Have on current PC, Win 7 64 bit CS5; How to get *.exe to transfer to the new computer after removal of old

  Have on current PC, Win 7 64 bit CS5; How to get *.exe to transfer to the new computer after removal of old?

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html

• How can getting error Code U44M1P7 during the upgrade, I fix?

  How can getting error Code U44M1P7 during the upgrade, I fix?

  Update product that you are trying to install?

  Is it compared to the creative or perpetual clouds?

  Please check following if you have creative clouds.

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html

• I keep getting a request to insert the disc from center of solutions to the start - I cannot locate disc - how can I replace? thanks__

  I cannot locate the windows solution Center disk and cannot find how to get the replacement for vista

  http://h30434.www3.HP.com/PSG/board/message?board.ID=general&message.ID=65

  http://h30434.www3.HP.com/PSG/board/message?board.ID=OSandSW&message.ID=10968

  Read the info on the on the link about your problem of HP software, not Vista.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  Above is the contact HP link help you, if info to these links don't solve the problem for you...

  See you soon.

  Mick Murphy - Microsoft partner

• How to get SEVERAL fields showing upwards at the point of a SINGLE page?

  Hello
  
  I have a page as a select list item (for example, name). And I want to have * 3 * columns LastName, FirstName MInitial appearing in the list, select the database.
  
  Is this possible? I don't want to use the 3 elements of the page to let the user select 3 times (ie: LastName, FirstName and MInitial respectively).
  
  The return_value could be just one or three values.
  
  The following is my code, BUT I need a * 3 * display_value:
  
  Select LastName display_value, PeopleId return_value
  of PEOPLETB
  order by 1
  
  Thank you very much
  Helen

  OK, let me see if I get this right:

  AFTER the name Mname field and before '.' you need the hose doiuble | ...

  If your query is the following:

  Select Lname | ', ' || Fname | Mname | '. "as display_value, PeopleId as return_value '.
  of PEOPLETB
  where PEOPLETYPE ('i', 'HERE', 'IF')
  order by 1

  (Sorry, had MInitial not for the element name mName)
  Don

• How to get hardware information to download the correct drivers?

  Hello

  I just installed Win7 on a T61. Most of the equipment works with the generic Windows drivers. For the rest, the Lenovo system update tool was very useful. I can nothing but recommend.

  However, Windows Media Player will not play DVD and request to update the graphic card driver display analog copy protection. The graphics card has been identified by windows as standard VGA graphics card. In the "Downloads & drivers" section of your site web, several drivers for several graphic cards/chipsets are available for my family/model/Type of T61 (btw, none for Win 7 but I would like to try Win Vista instead, don't you think that these work too?). I realized to a chip NVidia or Intel PM965 according to the manual of Maintenance of equipment for T61 15.4 "screens, correct?

  But how can I get information on what graphics card or chipset running my video of the Thinkpad?

  Thank you

  Ralph

  Problem solved ;-)

  For anyone else with similar problems: simply enter the brand, family, Type, model information in the "Important information" section and you will be rewarded by a box titled original installation.

  See you soon,.

  Ralph

• How to get several standard via ipsec vpn subnet?

  Dear all,

  I have this scenario:

  A - Hand router

  Cisco 881

  private network: 10.10.10.0/24

  private address: 10.10.10.2

  address: xxx.xxx.xxx.xxx

  B branch office router

  DrayTek vigor 2600

  private network: 100.100.100.0/24

  private address: 100.100.100.1

  sound: .yyy

  C - seat router

  range Cisco 1800 (no access - not mine)

  private network: 10.10.10.0/24

  private address: 10.10.10.1

  D another subnet in HQ

  private network: 10.20.20.0/24

  available in C

  There is a standard VPN ipsec from A to B due interoperability and compatibility between cisco and draytek. the vpn is in place and works very well.

  D is accessible from a C: hole

  #ping router ip 10.20.20.15 source vlan 1

  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 10.20.20.15, wait time is 2 seconds:
  Packet sent with the address 10.10.10.2 source
  !!!!!
  Success rate is 100 per cent (5/5), round-trip min/avg/max = 52/56/64 ms

  Now, I need reach D from B.

  I configured adding the 10.20.20.0/24 routing via vpn subnet B and tested the connection replacing the cisco 881 (A) with an another drytek vigor 2820; Add a static route in the drytek 2820 (10.20.20.0 via 10.10.10.1) make B able to reach successfully the D with ping 10.20.20.15.

  After that I tried to divide the acl of tunnel and ping in vain 10.20.20.15 d, I noticed a match in acl:

  Router #sh ip access list 101
  Expand the access IP 101 list
  10 permit ip 10.10.10.0 0.0.0.255 100.100.100.0 0.0.0.255 (3298 matches)
  20 permit ip 10.20.20.0 0.0.0.255 100.100.100.0 0.0.0.255 (14 matches)

  I also tried to prevent NAT from D to B without any match in acl after unsuccessful ping 10.20.20.15 d.

  Any suggestion is appreciated.

  Gianluca

  Hanks for the additional info

  So what is happening is the traffic is not getting encrypted, it is hitting the crypto acl but not getting not encrypted

  I know you would have checked it already, but please just check once more the entrance to nat and see if you have a deny for this traffic in the acl, nat

  We need to know why the tunnel isn't coming for this traffic

  could you please confirm wht is crypto ACLs on the other end, that's exactly the mirror image (2 acl), I don't know how the configuration is made at the other end

  give the following debug command

  Debug ip counterpart condition crypto / / if you have several tunnels will do conditional debugging

  Crypto ipsec its debug debug crypto or her (who was never there I think it's a bit confusing)

  one thing you can try if down the tunnel is also an option, just erase this tunnel using cry clear isa his id and disable remote session encryption and bring it and see if it happens

  Finally, given that I don't know how the other end is configured just try this as the encryption, ACLs on both ends

  10.0.0.0 0.255.255.255 100.100.100.0 0.0.0.255

  and the reverse on the other end and now try to brining of the tunnel to the top

• How to get a second image in the layer panel

  In item 13, I have two images that I want from. I brought here them both of the Organizer to the editor, but I can't seem to get them both in the layer panel to use one as a background. Someone just tell me how to get an image from the photo bin toward the layer panel?

  ligian2505 wrote:

  In item 13, I have two images that I want from. I brought here them both of the Organizer to the editor, but I can't seem to get them both in the layer panel to use one as a background. Someone just tell me how to get an image from the photo bin toward the layer panel?

  Several solutions. I advise to begin:

  You have your two visible photos the of in "basket" (area of the bottom of the screen). Choose the one that will serve as "background by double clicking on its icon. She apparaiit in the editing space. Now, click the second image basket of the in and drag on the edit box.  You have a preview of this new layer, ready to be resized, moved or such. Use the handles of the frame of this image pour what control do. When you post by clicking the green check mark, your new layer should appear in the layers of the screen Panel.

  You can adjust the dimensions etc. without loss of quality; This layer is UN 'smart object' as long as you don't choose "simplifier" (freeze) the layer which becomes a regular layer.

  Some operations on the layers cannot be carried out only after having simplified.

• How to get several xml elements in a relationship 1: n without using xmlaggregation

  I need to create the following xml structure from an oracle database

  where each survey can multiple deelnemers (participants)

  I'm not sure create this use of XMLElement without getting the message "ORA-01427 subquery returns more then one line."

  I could try to use dbms_xmldom (never done that before) but I wonder if anyone knows how to generate this just using the plain Oracle SQL-XMLfunctions (XMLElement, XMLAggr)

  < NieuweSurveys >

  < survey >

  < Surveynaam > 2013 - 02 - 01 < / Surveynaam >

  < Months > 2013 - 02 - 01 < / months >

  < Einddatum > 2013 - 02 - 15 < / Einddatum >

  < Deelnemer >

  Tilde < Chairwoman > < / Chairwoman >

  < Tussenvoegsel / >

  DeelnemerA < Achternaam > < / Achternaam >

  man < Geslacht > < / Geslacht >

  < Emailadres > [email protected] < / Emailadres >

  < Voorkeurstaal > nl < / Voorkeurstaal >

  Schouten < account > & Nelisen < / account >

  bouwer < function > < / function >

  < / Deelnemer >

  < Deelnemer >

  Tilde < Chairwoman > < / Chairwoman >

  < Tussenvoegsel / >

  DeelnemerB < Achternaam > < / Achternaam >

  Vrouw < Geslacht > < / Geslacht >

  < Emailadres > [email protected] < / Emailadres >

  < Voorkeurstaal > nl < / Voorkeurstaal >

  Schouten < account > & Nelisen < / account >

  Tester of < function > < / function >

  < / Deelnemer >

  < / inquiry >

  < / NieuweSurveys >

  What is your version of the database? (SELECT * FROM version$ v)

  The query does not match the output that you claim that it produces.

  In any case, the problem is the following:

  ) as "deelnemers.

  Put an alias here should not generate an element - unless you are using XMLForest in your actual query without your telling us.

  That's why I ask about the version of db, it could be an old bug that's been fixed now (I have not to reproduce the behavior on 11.2).

  What happens when you delete the alias?