restoration of the detonators

Similar Questions

• How to restore all the data stored on my Time Capsule airport to my new iPAD Pro

  I have a Macbook air with a backup at a time Capsule from the airport.  The MacBook Air is dead (blue screen).  Now, I have a new iPad Pro and want to restore all the photos that have been saved on the Time Capsule airport to my iPad.  How can I do this?

  Connect the iPad Pro to your computer and sync photos to the iPad Pro.

• Pavilion 17-g113dx: Can can't Do Factory Restore on the new Windows computer 10 17-g113dx

  I'm doing f factory restore on my new computer with Windows 10 installed at the factory.

  When I go to Recovery Manager, choose the HP recovery environment, there is no option for the restoration of the factory.  When I select the use a unit option, I chose DVD (because I made the recovery discs), I get a message that the "selected boot device has failed.  I tried to boot the computer using F8 or F11 and who does not work either.

  I'm ready to pull my hair, does anyone have the answer?

  Thanks in advance for the help and suggestions.

  slave2mybirds wrote:
  

  When I go to Recovery Manager, choose the HP recovery environment, there is no option for the restoration of the factory.  When I select the use a unit option, I chose DVD (because I made the recovery discs), I get a message that the "selected boot device has failed.  I tried to boot the computer using F8 or F11 and who does not work either.

  Hello

  Thanks for posting in the Forum from HP Support.

  Here are the official instructions for the restoration > > http://support.hp.com/us-en/document/c04758961

  Double please, check, there should be an option, it can be called a bit different.

  If you still do not see it, please take a screenshot of windows screen/photo and attach it to your next post > > http://www.take-a-screenshot.org

• 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

  1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

  I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

  I guess you have not fed and attempted to restart.

  In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

  Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

• My fonts & page size is SUPER HUGE and I wouldn't change a thing. I tried a system restore, but the pages are still MR. MAGOO size how to fix this?

  I was surfing around on eBay, when all of a sudden my screen has turned the size, he has always been to SUPER huge. And I change all the settings. I tried a system restore, and the pages on eBay are still Mr. Magoo size.
  I have no idea how or why this happened, and I just want back the sizing settings I had before.
  Help, please!

  See this:
  
  https://support.Mozilla.com/en-us/KB/page+zoom

• If I want to sell my iPhone, and I restore it, the buyer will never know that I had initialized before?

  If I want to sell my iPhone, and I restore it, the buyer will never know that I had initialized before?

  It will be clean, if you go to settings > reset > erase content and settings

• Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer

  Hi, I just refreshed my laptop that I got a few drops FPS at random. Initially, it worked fine, but after a while before instaled Norton started to cause me problems. At this time I uninstalled it and when he asked me to computer restatr now, I did. Now I'm stuck with this message window loading. Restart the computer from time to time, but the message is always the same: failure of configuration of Windows updates. Restoration of the changes. Do not turn off your computer.
  Computer: hp pavilion n006sm
  Operating system: win 8 pre-installed
  At the moment I'm stuck on this window for over an hour and nothing has changed

  Seems that problem solved by itself. As I correctly uninstalled Norton, I just put my automatic updates and restarted my laptop again. He installed the updates with no problem and its working fine. Seems that Norton was really the problem, will keep you informed.

• can I back up and restore on the same beta software

  I want to restore my iphone 6 to solve some problem, but I'm on the iOS 9.3 public beta 4 and I don't know if I am able to back up and restore to the same beta version. My problem is not related to the beta software and I don't want to go down, I want to just restore without losing anything while remaining on the latest beta.

  Make a backup, archive, and restore it as a new phone, no backup.

  Restore will install iOS non-beta 9.2.1

  Update via Wi - Fi to the latest beta (you may need to reinstall the beta profile first), then restore it from the archive save set

• HP Pavilion dv6 B8N04PA #ACJ: update the configuration of failure. Restoration of the changes

  Whenever the laptop to install the update. Then when you restart it will read the updates of configuration failure. Restoration of the changes.

  This continues until 30 minutes before it finally restarts

  Hi @mayurz91 ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your problems of HP Pavilion dv6-7040tx laptop and with updates.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system.

  If you run an antivirus protection, this could be a problem. Disable temporarily to perform the required updates.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  I hope this helps.

  Thank you.

• Satellite L350D-213 - restoration of the factory without disks

  Hello

  I came to this page because the Web, so many people say you don't need a disk and many others say that you do! {Massive headaches} CONFUSED!

  After last week, ending up with the UKASH virus on my computer, a friend helped and explains to go into MSCONFIG in safe mode and disable all, then I could finally get into my normal settings and do a scan to wipe it. I ran ad-aware, but later removed that he had fallen behind EVERYTHING, including IE. Then, I saved all my stuff and deleted from my computer to make room. I then did some general research and followed the instructions. "speed up my performance" followed by a few scans/clean ups and Defrags.

  I don't remember what I did to remove panic and difficulty Ukash and performance thereafter, except that I know that some applications do not work, because of a name of a file I know I deleted as 'my speed' and some I do not know why they do not work.

  After spending TWO WEEKS on this issue, it is better, the UKASH went, my performance is faster BUT the strange problem of a file, and I'm done with him! I want to do a factory restore to put all rights that I can and have done wrong.

  My question is; Can I do a record of WITHOUT restore factory, I don't remember if I've ever had a recovery disk, but if I did, I don't have any him more as they have become lost or misplaced.

  What are my options?

  My biggest fear is I'm at half way through the restoration of the factory and it prompts for a disk and I don't have. I also drive HARD recovery on my laptop on drives C and D.

  (System Restore does not work for me either, I have no restore points or can I create one, so another reason why I need to do a restore of the fctory)

  Kind regards.

  In your situation you should not spend a lot of time speculating on what the people are saying. In the user s manuals document described clearly how it works with the recovery image installation, creating recovery image and what your options are.

  In my opinion the best solution for virus affected system is new and clean install of the OS. It's certainly more radical solution but, I think of easier and faster way to have own OS again. The first step is the backup of the data, if possible and recovery image installation (factory settings).

  Recovery image can be installed on two ways:
  1 as described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm HARD drive recovery facility
  2 with recovery disk created recovery image installation

  I presume you didn't create this disk so that you can do now is to order on https://backupmedia.toshiba.eu/landing.aspx

  In any case, try it please with option 1 and send feedback.

• Need to restore to the Equium L350 DVD

  Can someone please send me a copy of the DVD of restoration for the Equium L350?

  Thank you
  Russ

  Hello

  As far as I know your laptop supports a HARD drive recovery.

  This means that you can restore your device without the Toshiba Recovery CD.

  To start the system recovery, you must press the F8 key. Choose the repair of the system, and then follow the instructions on the screen.

  Of course you can also create a clean restore CD using the pre-installed tool called Toshiba recovery Disc creator.

  The link to this application should be placed on the desktop.

  Greetings mate

• Pavilion dm4-3090se: how to use the SSD after restoration of the system of Windows backup disks?

  Hello

  After a lot of work, I finally could restore my OS using Windows backup disks that I created a few years back. (The OS has been corrupted when the power has been accidentally deleted from the system and the battery was dead)

  Restoring backup widows put everything on 444 GB C drive.  Nothing I put on the SSD drive d:-20 GB and there is nothing in the tools of HP E: drive - 4 GB

  How can I make use of the SSD drive to help speed up the system?  I see the system starts and runs more slowly now.  I'm ready to blow the current operating system and re-run the Windows backup utility.  But I need to know how to use the SSD during the restoration.

  Any help is appreciated.

  Thank you

  Bob

  Hey @llebrez,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you have some information about using the SSD in your HP Pavilion dm4 Beats Edition Entertainment Notebook. I'd be happy to help you with that.

  The SSD in your laptop is used for a technology called Intel Smart Response. Intel Smart Response uses the SSD as a type of Cache smart to help load the items faster. The reason why that is not used currently is because the restoration of the system is not designed to use the SSD for intelligent caching and is not able to establish that on its own.

  If you want to configure Intelligent caching on your laptop, you can follow this guide provided by overclock.net: how: implement the Intel Smart Response Technology (SSD caching)

  I hope this helps. If you have more questions that I'm able to answer for you, please do not hesitate to ask.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• Qosmio F20-137 will not system restore after the process

  My F20-137 will not restore the system after going through the system restore process. The parameter for the restoration of the system is not in the off position too. Someone there might help me?

  See you soon
  James

  Please check this thread on the Microsoft System Restore tool.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19847&MessageID=72814

  You will find several links to useful pages.

• Message Windows to restore in the minimized state bar panel.

  Are there messages that appear when a window is restored from the State, other than the 'Got Focus' message (for the recall of the main table)? I need to know when a group of experts has been restored to the State of minized (the user has clicked the button on the taskbar) and is used again. Other than the flag that set if a child window has a separate task bar button, it seems no signals or functions in that regard at all.

  It is currently not possible. However, this proposal has already been posted hereand you can add your own voice, in order to increase the probability that it gets implemented.

  Luis

• KB2423089 security update configures and restoration of the changes

  Original title: KB2423089

  security updates will not be set up.  It is said updates are not configured correctly.  Restoration of the changes.

  Hi bebop113,

  1 Windows operating system you are using?

  If you use Windows 7, then try to run the update from Windows 7 troubleshooting and try to install the update.

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If you are running Windows Vista or Windows XP, then try to reset the Windows Update components and try to install the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.