How to get the present host ESX VM name

Similar Questions

• How to get the cpu host machine virtual mhz by PowerCLI

  How to get the cpu host machine virtual mhz by PowerCLI

  Thank you

  

  The following command of PowerCLI will list the maximum cpu MHz for all of your virtual machines from the host:

  Get - VM | Select-Object - property Name,@{Name='MaxHostCpuMhz'; Expression = {$_.} NumCpu * $_. VMHost.CpuTotalMhz / $_. VMHost.NumCpu}}

• How to get the list permissions wise page name or menu-wise

  Hello
  
  I want to know this authorization list associated with a specific page or a menu. Please help me how to get that

  Check the following on the internet regarding the area of authorizedaction, which contains the information you need.

  http://peoplesoftwiki.blogspot.nl/2009/12/finding-barname-ItemName-and-all-about.html

  you want to hide the PeopleTools menu? If so, mke sure (s) he doesn't have the permision list that grants the permissions so that you do not want.

• How to get the PC host name using labview

  Hello

  I have a need to display the name of the host (login name) pc in my application. How do I get using labview in DURATION that is if I write a program and run it in different systems of PC / same system with different users, so I should get corresponding logins.

  Can someone help me on this?

  Thank you

  Kind regards

  DEGHA

  

  Should be available in LV RTE

• How to find the corresponding devices ESX LUN names

  Hi all

  On the ESX host when I go the directory of devices, it gives me the list of the devices that are connected to the ESX host. an example of this would be

  LS/vmfs/devices/disks and the output is similar to

  SYM.012310084730303430
  SYM.045610084730323537
  SYM.078910084730323537:1
  SYM.010010084730323545
  SYM.013450084730323545:1

  Now, these are devices that are presented to the ESX cluster from the storage point. SYM will in this case be EMC.

  When it is presented to the ESX will give him a friendly data store name.

  My question is:

  How can I check the name of the corresponding sym.012310084730303430 data store

  Any help will be greatly appreciated.

  Kind regards

  VAN

  Hello

  on ESX 4, you can use the command: "esxcfg-scsidevs - m" for a list of devices. For more info (also for other versions of ESX (i)) Please take a look at the following KB article dealing with your question:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1014953

  Concerning

• How to get the MAC address for the physical NETWORK adapter of the HOST ESX (vmnic0/vmnic1)

  I can recover physical NIC details for the server HOST ESX, but MAC is empty... How can I get?

  Thank you/HKS

  $net = get-VMHostNetwork - VMHost myServer.domain.net

  $net | FC

  class VMHostNetworkInfoImpl

  {

  VMKernelGateway = 166.12.113.1

  ConsoleGateway = 166.12.113.1

  ConsoleGatewayDevice = vswif0

  DnsAddress =

  [

  169.40.0.2

  169.40.0.1

  ]

  DnsFromDhcp = False

  DnsDhcpDevice =

  DomainName = domaine.net

  Host name = hostname1

  SearchDomain =

  [

  EU.hedani.NET

  ]

  PhysicalNic =

  [

  class PhysicalNicImpl

  {

  BitRatePerSec = 1000

  FullDuplex = True

  WakeOnLanSupported =

  ID = key - vim.host.PhysicalNic - vmnic0

  DeviceName = vmnic0

  Mac =

  DhcpEnabled = False

  IP =

  SubnetMask =

  }

  class PhysicalNicImpl

  {

  BitRatePerSec = 0

  FullDuplex = False

  WakeOnLanSupported =

  ID = key - vim.host.PhysicalNic - vmnic1

  DeviceName = vmnic1

  Mac =

  DhcpEnabled = False

  IP =

  SubnetMask =

  }

  ]

  VirtualSwitch =

  [

  class VirtualSwitchImpl

  {

  Key = key - vim.host.VirtualSwitch - vSwitch0

  Name = vSwitch0

  NumPorts = 128

  NumPortsAvailable = 105

  NIC =

  [

  vmnic1

  vmnic0

  ]

  MTU =

  }

  class VirtualSwitchImpl

  {

  Key = key - vim.host.VirtualSwitch - vSwitch1

  Name = vSwitch1

  NumPorts = 64

  NumPortsAvailable = 56

  NIC =

  MTU =

  }

  class VirtualSwitchImpl

  {

  Key = key - vim.host.VirtualSwitch - vSwitch2

  Name = vSwitch2

  NumPorts = 64

  NumPortsAvailable = 64

  NIC =

  MTU =

  }

  ]

  ConsoleNic =

  [

  class HostConsoleVirtualNicImpl

  {

  PortGroupName = Service_Console_VLAN1

  ID = key - vim.host.VirtualNic - vswif0

  DeviceName = vswif0

  Mac = 00:50:56:4 c: 1 d: 3B

  DhcpEnabled = False

  IP = 111.11.111.11

  Subnet mask = 255.255.255.0

  }

  class HostConsoleVirtualNicImpl

  {

  PortGroupName = Service_Console_ISOL

  ID = key - vim.host.VirtualNic - vswif1

  DeviceName = vswif1

  Mac = 00:50:56:4 d: 88:87

  DhcpEnabled = False

  IP = 10.0.0.241

  Subnet mask = 255.255.255.0

  }

  ]

  VirtualNic =

  [

  class HostVMKernelVirtualNicImpl

  {

  VMotionEnabled = True

  PortGroupName = Vmotion_VLAN1

  ID = key - vim.host.VirtualNic - portgroup3

  DeviceName = portgroup3

  Mac = 00:50:56:65:04:56

  DhcpEnabled = False

  IP = 166.12.113.72

  Subnet mask = 255.255.255.0

  }

  ]

  }

  get-vmhost | % {(get-view $_.id).config.network.pnic} | select Device, Mac
  

  http://www.vmwarescripting.com

• How to get the fnd_profile.value in the host program

  Hi all

  How to get the FND_PROFILE. VALUE('ORG_ID') in the host program.

  I loved not below, but it failed.

  v_return =' $ORACLE_HOME/bin/sqlplus - s $FCP_LOGIN < < END

  set pagesize 0

  trigger the echo

  fnd_profile. Value ('ORG_ID');

  EXIT;

  END '

  echo $v_return

  but it error with the message: Retrun value SP-0734: unknown command beginning "fnd_profile...". »

  Kind regards

  UVA

  > but it error with the message: Retrun value SP-0734: unknown command beginning "fnd_profile...". »

  .. .who is the same thing that will happen if you run SQL * more and type "fnd_profile.value...". »

  Assuming that fnd_profile.value is a function, you must select from the something (say double) or assign to a variable.

• How to get the host name of the physical computer inside a virtual machine until the user logs in Windows?

  I don't know if this is the right place to post this question, I develop software to support VMWare PCoIP and need to know how to get the host name of the physical machine (which manages the virtual machine and View Client) within a virtual machine before the user logs in Windows of the virtual machine.

  I understand there are two ways to read the host name, via the HKEY_CURRENT_USER\Volatile Environment registry and environment variables, but they are available once the user is connected. I need info before the user connects.

  Is there a VMware API that can be called or asked the host name?

  Thank you.

  Not on the broker, but there are the startup scripts to log on to the computer virtual itself: http://pubs.vmware.com/view-52/topic/com.vmware.view.integration.doc/view_integration_startsession_script.9.2.html

  Note that these executed when a virtual desktop computer allocated connection, not to the point that the client connects - it is possible for the customer to not complete the connection (crash, cancel, network failure) and so any what solution you design must handle this.

  Mike

• How to get the files to and from the host

  Is there something that I can read which explains how to get the (ftp, memory stick or other) files to and from the host?

  Sorry if this is a noob question, I looked but could not find something specific...

  There are many ways of doing so:

  1 activate not supported ssh and scp use

  2. use VI Client access to your storage space on configuration files and server transfer

  3 configure the iSCSI or NAS to deal directly

• How to get the list of RDM?

  Hi all

  In our environment both of RDM is presented to different virtual machines in physical compatibility mode. It was very difficult for me to keep track

  Could you get it someone please let me know, how to get the list of the RDM presented to ESXI 5.0 host?

  Thank you!

  Ravindra Reddy

  Thank you... A P... for your response tools RV is the right tool, but I wanted to naa number of LUNS as well.

  After 2 hours, I had below power CLI command to get the list of the virtual machine.

  PowerCLI C:\ > Get - VM | Get-hard drive - DiskType "RawPhysical", "RawVirtual" | Select name, Parent, ScsiCanonicalName, DiskType | FL | Out-file C:\RDMlist.xlx

  Thank you!

• How to get the card working on Tecra M1 WLAN?

  I just bought a 2nd hand Tecra M1. Great! It has installed XP but no Toshiba tool. I can't access my WLAN router. Seems like if WIFI connection is not yet installed. As I know from my Satellite Pro M30, there are Toshiba tools for this, they work smarter.

  Maybe I need drivers - WXP is material unknown when starting up - might be the WLAN device - who knows.
  When I check the network connections, I find 1934 and LAN adapter, but no WLAN device. I have already run the XP Wizard for WLAN connections, SSID and hexagonal key; but no WLAN device presents itself.

  Then, someone a idea how to get the job of WLAN?
  Is it possible to get the Toshiba M1 software or can I use my software SatPro?

  Thank you Jan so far

  It's good that you will find yourself, I think most of us would point on your ad when you have users with a similar problem. Sometimes it s really useful to have users like you who will investigate their cases.

  I'm now long enough a Member here, but every time I have met people who have solved problems like that, then I must say how much I appreciate it. :)

  Welcome and good weekend

• How to get the icons to display correctly in the Finder?

  At the time of the "classic" Mac OS, if the icons are not correctly display in the Finder, we could 'rebuild the desktop file' to correct the problem. I've recently updated to Yosemite, and most things work well, but for some reason, most of the files in the Finder .webloc now show as blank icons (but not all; a few show the correct icon). There is no model, I can see: some very old .webloc files now show a white icon (where I know that their icons used to be correct), while the most recent show the icon of correct - although I just created four (by dragging the URL of the Safari, the usual method) which are all empty. Sometimes they appear with the older icon, with the symbol @ (although those who seem to have changed vacuum after running and restart maintenance). I tried from an external disk, repair permissions and repair the file system, as well as cleaning with the utility of Maintenance (which clears the web browser and other caches), nothing works. Does anyone know how to get the computer to display these icons correctly?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.finder.plist and com.apple.desktop.plist.  Move the .plists on your desktop.

  Relaunch the Finder by restarting the computer and test. If it works fine, delete the plists from the desktop.

  If the same, return the .plists to where you obtained since, by crushing the latest.

  Thanks to leonie for certain information contained in this.

• How to get the mask of IP subnet by program

  Hi all

  for my application UI (contact control via an external library of LWIP system) would be very useful if the host network map is capable (that is correctly configured) to connect with the desired IP address.

  I have an idea to use GetAllTCPHostAddresses () function - and get host IP interfaces available. But how to get the IP subnet mask appropriate for each interface?

  Any advice will be appreciated!

  Thank you

  George

  Hi, Roberto,

  that all I wanted to thank you is a lot!

  Now I tested it and it is good work.

  See you soon,.

  George

• How to get the specific information of hardware and software data center

  How to get the specific information of hardware and software data center with powercli...

  What kind of information you need?

  No matter what Esxi host hardware info., if so could below thread is useful.

  Information about the host material with information on the nic and HBA drivers

• How to get the OSB to stop adding port # in a published WSDL endpoint

  This is the thread more close to you I could find in my question, but is still not quite what I'm looking for: How to get the ip number in WSDL instead of host name? I have a server behind a VIP of the OSB, and I publish a proxy for external customer service to call. The VIP only accepts connections over SSL/https. OSB hosts only services over http port 80, and the VIP manages connectivity and security between them.
  
  I wrote a wsdl by hand, set my endpoint address (https) VIP point, has created the proxy service and deployed to the OSB. I can test the service throughout the day in SoapUI calling the VIP, well. However, when the client calls https://VIP/myService/?wsdl, he sees endpoint from the wsdl populated as http://VIP/myService:80.
  
  How can I prevent the OSB adding: 80 endpoint in the wsdl file? This makes it unusable for any appellant client generate the code by calling? WSDL, so we have to export the wsdl file and schema files and provide customers by hand. What configuration settings we can change that will fix this behavior?

  We had the same problem.
  in the cluster/http configuration, change the HTTP/HTTPS port number, which will appear in the generated WSDL from the frontend