ODD has stopped working on the Satellite Pro A200

I have a Satellite Pro A200 - PSAE1E.

The CD/DVD was working fine and then stopped. I put in another CD and it went through the process of trying to find - but could not.
It ejects the disc. I tried with other CD in the same direction. Yellow light works during the research process.

I tried to remove the CD from the Device Manager and remove entries of regedit (as suggested on another thread) all without success.
The computer is a little over a year old and I have no recourse to assistance centers as I live in West Africa.

Can anyone offer any suggestions?

Hello

Is it possible to boot from the recovery disc?
I mean the CD/DVD drive reads the original disc Toshiba and it of possible to read other CD or DVD from different manufacturers?

If all the other disks are not readable then the question looks like a WEIRD error and in most cases the STRANGE must be replaced.

PS: Please note that if you try to boot from the recovery disc then start a recovery procedure will format the HARD drive and reinstall it the entire image of Toshiba.

Tags: Toshiba

Similar Questions

  • Fan has stopped working on the satellite

    I've had the laptop for jusy 7 weeks and the fan has stopped working. It always seemed that he ran too to what looks like at full speed almost constantly, but now its stopped.

    I just tried to call the helpline and ended up leaving a message to be recalled. They work on Sunday?

    How long they tend to take to fix these things?

    Hello

    I put t know 100% if they work on Sunday, but I presume that they don t
    However, can you please tell what camera do you use?

    I can t believe that if fans stopped working then the laptop should automatically stops or the CPU overheats! It is very dangerous because the laptop and the motherboard may cause damage.
    So if the fans don't turn you should not turn on the laptop.

    But maybe the cooling modules run only with the lower speed?
    This is not unusual. The BIOS and the energy-saving control the speed of the CPU and cooling modes. Fans should not run with maximum efficiency if the temperature does not increase.

  • Built in mic has stopped working on my Satellite Pro T130

    Dear Forum,

    the microphone of my Satellite Pro T130 15F stopped working a couple of days at a time.

    It captures the white noise.
    But he responds only to knock on the place where it is located next to the built-in webcam. It does not pick up normal voice or cry out to him...

    Can't bring any changes to the software that could influence.

    What I've done so far: deleted drivers, installed new, updated all Toshiba Software and downloaded and run all the stuff suggested to this problem.
    And of course, it is not set to mute or upgraded to the bottom.

    Still no cure.
    What's next?

    Thanks much adavance.

    Hmmm, it makes a static noise? Kinda sounds like hardware related issue
    But check the microphone settings in the control panel-> sound-> recording tab
    Here, you should see two entries; internal microphone and external microphone port.
    The internal microphone must be turned on!

    In addition, the internal mic belongs to the webcam. In the assistant webcam-> settings-> audio tab, you can increase the maximum microphone volume.
    Check this box

  • Optical disc drive has stopped working on the Satellite a series

    My 10 year old son has a Toshiba laptop that he uses to play CD games, watch DVDs, etc.
    A few days ago he complained that he can no longer play its CD and DVD s.

    When I checked it, I found that the PC DVD R/RW e drive is full when I right click on it and open properties. It says 0 bytes remaining and the pie is complete without space. I don't know what happened, so is my son. You see, I'm not good with this stuff, please someone tell me what to do. Thank you...

    Moreover, our laptop is only a half a year old. It was purchased new.

    Hello

    To be honest I'm not quite sure what happened but maybe it s m just a problem of windows registry.

    First of all I recommend you to remove the CD/DVD Device Manager drive.
    Then leave the appliance Manager and start recording (in RUN type regedit).

    There, you have to completely remove the Upperfilters and Lowerfilters from the following registry key values:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    After restarting the device, wait for Windows to recognize the CD/DVD drive and retest the CD/DVD drive

    See this for more details:
    http://support.Microsoft.com/kb/270008/en-us

  • I can't change my PDF even if I pay for the plan of creative cloud. It seems that it has stopped working over the weekend.  Someone knows why?

    I can't change my PDF even if I pay for the plan of creative cloud. It seems that it has stopped working over the weekend.  Someone knows why?

    I worked on it. For some reason, he opened my PDF in Adobe Reader DC and DC Pro not Adobe.  Once I have it open as a Pro it works beautifully and I could edit.

  • Speakers have stopped working on the Satellite a series

    I have a laptop satellite - not sure what mono - speakers have stopped working and are unable to turn back.

    Have tried checking volumen and none controls mute buttons are slected. tested and it says ther no problem but still no sound. have uninstalled the driver and reinstalled - what else can I try?

    > have a portable satellite - not sure that we
    Roll on Notepad and check the label at the bottom of the unit. You will find the name of the laptop!

    > Speakers have stopped working on the Satellite a series
    Open the Device Manager and check if no yellow exclamation point appears. If you can see this yellow sigh perhaps the sound card driver is not installed correctly.

    In addition, please plug the headphones to your laptop and check if you can hear anything through the headphones.

  • My bi-ecrans Setup has stopped working with the latest update of Windows

    My bi-ecrans Setup has stopped working since the last windows update.  The second screen is relegated to never turn on and in the part 'View' of the Control Panel, I can't change the 2nd monitor resolution of anything in addition to 480 x 640.  I installed the latest drivers for the video card and two monitors.  I have everything down, powered, entretienavec left for a few minutes and fed up, nothing.  It has been like that for a few days now.  Any advice would be very useful,

    Thank you

    Tyler

    Details:

    PC: HP Compaq 8200 Elite

    Graphics card: AMD Radeon HD 6500 Series

    First monitor: ViewSonic 2030

    Second monitor: Dell 1908FP

    All pilots are underway according to Dell, ViewSonic, AMD and Microsoft.

    Latest patches from Windows Update killed my dual Setup monitor:

    Update of security for Microsoft Office PowerPoint 2007 (KB2596764)

    A security update cumulative for the stop bits ActiveX for Windows 7 for x 64-based systems (KB2618451)

    X 64-December Windows malicious software removal tool (KB890830) 2011

    Update security for Windows 7 for x 64-based systems (KB2620712)

    Update of security for Microsoft Office PowerPoint 2007 (KB2596912)

    Update for Microsoft Office Excel 2007 (KB2596596)

    Update of security for Microsoft Office Publisher 2007 (KB2596705)

    Update of security suites for Microsoft Office 2007 (KB2596785)

    Cumulative Security Update for Internet Explorer 9 for Windows 7 for x 64-based systems (KB2618444)

    Updated for suites Microsoft Office 2007 (KB2596651)

    Update security for Windows 7 for x 64-based systems (KB2639417)

    Updated for suites Microsoft Office 2007 (KB2596789)

    Update security for Windows 7 for x 64-based systems (KB2619339)

    Update for Windows 7 for x 64-based systems (KB2633952)

    There is no update stated in your post which could have implications on your graphics card, or its driver.

    Have you installed the latest graphic driver AMD in the AMD site?

    http://sites.AMD.com/us/game/downloads/pages/radeon_win7-32.aspx

    NB this link is the 32-bit win7 driver.

  • 5.7 LR "Adobe Photoshop Lightroom 64-bit has stopped working" in the library when I type "import...". »

    5.7 LR "Adobe Photoshop Lightroom 64-bit has stopped working" in the library when I type "import...". »

    I have 31K photos in a catalog.  It's the only catalogue that I use.  Recently, today I imported 84 photos on the same folder I try now to import 200 +.  Adobe Epic Fail!

    Delete the folder "Lightroom 5 catalog Previews.lrdata" and the folder "5 Lightroom Catalog Previews.lrdata Smart" and disconnected from my USB hub, but not my two external hard drives USB.

    I import now.

    Thank you Adobe for the best photographic catalogue in the world system!

    -Love

    Steve

    http://stephenjungphotography.SmugMug.com

    Live from the "capital of the world Live music."

  • I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

    I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

    Gary

    The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

    The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

    When you have done this, place you and double click on the correct catalog and LR should then start OK.

  • Fanspeed went the Satellite Pro A200

    Hallo,

    the fan speed increases after bios update. I'm not the only one, but all others have the same problem or not? The fan runs every 30 seconds of high level, too strong. In addition, I went outside and again, the fan works every 30 seconds. SpeedFan said that two hearts are on 10 C. So why does the fan work? After checking the toshiba power management, I changed battery. But this view has not helped. The fan runs again every 30 seconds, but the fan speed does not detect a fun Temperation. The two nuclei of 30 c to surf and send. And another fact is that I want to use carrots for 2 GHz and not 800 Mhz (utility). Change cooling EIB defragmentation method and the intel utlity says 800 Mhz to 2 GHz! It seems that the method liminized toshiba carrots at 800 Mhz?

    If there is a chance to roll back the bios, please help me. Or if there is a guy from toshiba, so please tell the BIOS programmers! In addition, my olders toshibas allowes to control the speed of the fan by the bios or software (fanspeed), why does'nt the satellite pro A200? The fan is too strong tension and the offset of the Temperation is at bottom.

    Please another you experiences, even, you have no solution for the problem.

    Bye - Daniel

    (installed under Vista Ultimate system, all new packages of windows and toshiba)

    Published by: ADMIN on February 16, 2008 20:52

    In most cases the update BIOS helps ;)
    But thanks for this info!

  • 2nd hard drive for the Satellite Pro A200

    Hello

    I have the Satellite pro A200 (PSAE4E-03401FDU). The LT has an option for a 2nd hard drive, but it is not included a cable.
    Someone knows the reference to the 2nd hard drive cable?
    Thank you!

    Stand by.
    When you remove the HARD drive to the second HDD can see HDD SATA conector?

  • Some devices are not correctly installed on the Satellite Pro A200

    I have the Satellite Pro A200 psae7e. and I also have a problem with the PCI memory controller, Modem device on high definition audio bus, mass storage controller, because they are marked in yellow in the Device Manager.

    My knee works fine... sata works fine, graphic controller & etc. Everything in the natural order. but I don't want the yellow icons in Device Manager.

    How to solve this problem. I installed all the drivers, but there is still that the yellow icons that appear.

    And could someone tell me what is the PCI memory controller? Is that the shared memory?

    PCI memory controller is Intel Turbo Memory, also called chip logic Intel Flash cache
    It s a new technology designed to support the new features of Vista.
    There is no driver for Windows XP because XP doesn t supports the cache feature.

    The component of embedded controller compatible ACPI Microsoft supports the Advanced Configuration and Power Interface (ACPI) AC adapter device objects that the operating system uses to manage the resources of power.
    Seems that you BIOS does not support this!

    Update the BIOS to version XP!

  • Upgrade memory on the Satellite Pro A200

    Have two cell phones of #PSAE1E - 00T002EN Satellite Pro A200 and wanted to know if I can pass the 2 x 1 GB memory 2 x 2 GB?

    If I understand correctly what ask you, you want to upgrade memory of 4 GB laptops.

    Well, I think that it s is not possible.
    The Satellite Pro A200 supports maximum 2 GB of RAM (2 x 1 GB), then you will not be able to use 2 x 2 GB modules.

    Best regards dude

  • Need information on display on the Satellite Pro A200-1SS

    Hello, I m about to buy the Satellite Pro A200-SS, but I m interested in what I should expect from its display. Is this enough to play games? What is an answer of this LCD? I also heard that the various types of LCD screens are assembled in this book, is it true?

    If so, please, try to name and describe them - the most important attribute for me is a response and usability for playing games.

    Well, I hope that someone will answer my questions. At latest.

    Hello

    Check this box
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=137018

    Satellite Pro A200 is equipped with a screen 15.4 "screen Toshiba TruBrite WXGA TFT high brightness - internal resolution: 1280 x 800

    It of a really a good laptop screen. Trubrite technology makes very clear photos.
    It is really good to play the game

  • Low RAM speed to the Satellite Pro A200

    Hi all!

    I bought the Satellite Pro A200-1SS with 1 GB of RAM (DDR2 667 MHz), which I've recently updated with a module 2 GB DDR2 667 MHz of Kingston. Problem is that this vista partition, which was 4.2 with only 1 GB module suddenly dropped to 2.2. Everyone knows the same problem?

    Thanks for help.

    Problem solved after reinstalling vista

Maybe you are looking for

  • Why not list not refresh?

    Sometimes the email list when I go from one folder to the other fails to refresh. If I move the mouse on the list in the new folder will update it but not always completely.Figure 1 shows the displayed e-mail CAD folder BUT the "Input" folder below i

  • Want 5530: Printer does not print in black ink

    I recently updated my HP 8.1 Windows of Windows 10 laptop.  I have the same type of printer (Envy 5530) installed at my other House and updated my desktop computer for Windows 10 and had no problem with printing, but now I'm with the laptop.  I try t

  • Windows Mail: this file does not have a program associated with it

    I can receive and open the email, but when I click on anything in the email a box comes up which says "this file does not have a program associated with it for performing this action. Create an association in the set associations Control Panel. Don't

  • How can I get my icon of network connectivity added to the notification (to the left of the date) area?

    original title: Hello, how can I get my icon of network connectivity added to the notification (to the left of the date) area?   Thank you, NT The icon disappeared after stopping at the wall accidentally. When I right click on the taskbar, go into th

  • Marshmallow apps crash

    After factory reset and update of Marshmallow, I reinstalled some old applications such as "defender2" and "blood and glory", the accidents of application to the moment I open it. They worked fine in lollipop.