How to identify the Source of Table in a schema star

Similar Questions

• FireSight: How to identify the source via a proxy device.

  Hi, I was wondering just how you would be able to identify IP addresses source devices on your local company network, if all http traffic through an internal proxy server?

  I have been performing discovery of the network for more than a week now and I'd start running of policies. But when I look for the analysis, I see is the source of my proxy server address.

  Thank you very much.

  You would need either the SourceFire appliance / ASA/w firepower to between the proxy server and your users or remove the Proxy Server all together.

  --

  Please do not forget to select a correct answer and rate useful posts

• How to identify the source file and edit reports in Oracle Sales R12.1.3

  We use R12.1.3 with Database 11g.

  I would like to know - how to change the report.

  --------------------------------------------------------------------

  For example if I want to edit a report in the module INVENTORY existing any report.

  • After the name of the report identify the concurrent program
  • The program contributing to identify the name of the executable file
  • In the executable file name identify the
    • Method of execution: Oracle report
    • Running file: name of the source file for the report
    • Take backup and edit the report and replace the report in the TOP >

  But in the sales module (it is not form based Oracle - I think it is developed on OAF)

  I would like to know how to identify and modify the report.

  According to standard - module sales Oracle provides three report and according to our Advisor to use these three reports, we need to install BI

  So we must find the solution through internal developments

  Hello

  Set the option to profile ' FND: Diagnostics ' to 'Yes' at the level of the user and you will be able to get 'on this Page' link at the bottom of the page.

  Kind regards

  Zahid

• How to improve the Source system table $?

  I have this interview question, and the only thought that came to my mind was to define a source as a nested table column?

  Post edited by: 2946941

  I suspect that the question didn't quite explain.

  Assuming it was more like ' what do you think Oracle could do to improve the table of $ source "your thinking is quite reasonable. Another option, possibly, would be implemented with a single line per source with a LOB over several rows by line number.

  Kind regards

  Jonathan Lewis

• How to identify the expressions of folklore in the lot while reading File adapter

  Hello
  I have a bepl process to read data from a batch of 100 records text file and write in an Oracle EBS interface table.
  After the completion of the above, I have to call a partner link.
  Problem here is that, how to identify the expressions of folklore, so that I could call my link partner in BPEL.
  How do I get there? Any help is greatly appreciated.

  Hello

  You can implement a separate process, say FileNotificationProcess, you call the link partner, based on the batch Manager wsdl to $ORACLE_HOME/bpel/system/xmllib/jca/BatchManager.wsdl. This new process would be notified of different States of the file reading activity:
  # onBatchReadStart - indicates when a file is started to read
  # onBatchReadComplete - indicates when a file is done playing
  # onBatchReadFailure - tells when a record cannot be processed by the infrastructure of adapters.
  In your case, you would call the partnerlink when a notification of "onBatchReadComplete" is sent.

  In your main process to the file adapter, add the below property, so that the file adapter would inform the new process of the different stages of the processing of batch file.

  bpel://default|FileNotificationProcess
  

  This is described in detail in BPEL best practices guide page 3-18 http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf and the article excellent blog of anthony at http://blogs.oracle.com/reynolds/2008/06/more_on_batch_processing_in_bp.html.

  Kind regards
  Yohanna.
  http://www.prshanmu.com/articles/

• How to save the data in table 1 d to Excel in continuous

  Mr President.

  How to save the data in table 1 d to Excel at all times, so that all the data of the first scan must be placed first thought and all the data from the second analysis must be placed on the second Board and continue on the street...

  Sy@m...

  Hi Sy@m

  Here is a vi that might give you a few ideas to try:

• How can identify the real space in my SGPT123 Tablet?

  Hello

  How can identify the real space in my Xperia Tablet? I can see only 10.0 GB, if suppose has 16 GB, where's the rest?

  A space is medical, the Android operating system and recovery Partition.

• C: drive is running out of space, even if I moved everything I could to the E: drive. How to identify the "space Eater"?

  I moved all my data to the other disk. I was installing new programs on the other disk. Yet, the space on drive C: (37 GB) keeps becoming 'used '. Free space now is 2%. How to identify the "space Monster" which takes more and more the training?

  37GB is size sorry for C:.  My minimum recommendation for everything that came out at the time of and after Windows Vista is 60 GB.

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

• Windows vista Home premium recovery question - how to get the source for windows vista home edition premium as the recovery does not work since the recovery partition

  How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message

  Hello

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How iterate/identify the screens of the application stack

  Hi all

  1. work on the version of BB storm (9500/9530 Simulator) is v4.7.0.75
  2 opportunity BB JDE 4.7

  3. the request is:

  In my application I have screens showns one based on the click number, how can I display no matter which screen every time I required.i tell how fetch/identify the battery and display.

  Thanks in advance

  Ratna

  I donno what are your exact needs...

  If you want to load screens on selcting a menuitem from the GUI go to create menuItem.

  In the case depends on certain conditions of your application then just use

  try
    {
         UiApplication.getUiApplication().pushScreen(TestScreen);
    }
  
  catch(Exception e)
  {
  // PUSH screen fails because the screen was already pushed.
  // remove the screens from top of the required screen.
  while(UiApplication.getUiApplication().getActiveScreen() != TestScreen)
  
    {
       UiApplication.getUiApplication().popScreen();
    }
  }
  

• How to access the source timecode in the timeline?

  Hello

  When I enter a time code while in the panel mounting, the prescription jumps to absolute timecode. How to access the source timecode of the clip on the prescription is?

  THX,

  Jayson

  You can't directly.  You need to charge this element in the Source monitor, where you can go the desired timecode, and then make a game framework reverse to get to the very image of this sequence.

• How to identify the virtual copies (in my records) that have already been deleted a collection

  Hello!

  I keep looking for an answer to this anywhere on the web and 3 books, but can't find the answer...

  How to identify the virtual copies (in my records) that have already been deleted a collection?

  Here's the workflow, and where I'm stuck.

  1. I chose a picture and put it in a collection.

  2. I did a whole bunch of virtual photos in the collection copies that I tried different modifications.

  3. after and during a lot of changes, I have a lot of virtual copies removed from my collection because I decided against the changes after doing some comparisons.

  4. when I went the folders to select my next picture to work away and so to add to the collection, I discovered that each of my virtual copies was in the original folder, even if I had deleted from my collection.

  5. I really don't want these virtual copies deleted to be in my home folder.  They were virtual copies of trial and error and I wanted them to really just be thrown out.

  6. how to identify these virtual copies removed-from-the-collection in my folder?  File names all look the same, and besides, I want to be absolutely certain that I have selected the right ones.  Some of the changes were very minor and would be difficult to see without laboriously go through them one by one.

  Thank you very much!!

  Anne

  No easy answer on fixing the mess other than an individual inspection of the virtual copy can't watching the Images/Edit history to determine which ones that you no longer need.

  But to help prevent the problem in the future: when you are working from a collection, you must use ALT + return back to remove a copy of Photo or virtual catalog. With just the key DELETE or BACKSPACE only deletes the photo from the collection.

• How to identify the iSCSI nodes?

  How to identify the iSCSI nodes?

  with IQN

• How to identify the fonts used in text format?

  How to identify the fonts used in text format?

  Hi DSB.

  Open the document in Reader, go to the menu file-> properties, then click on the tag are. You will see a list of the fonts used in the document.

  Another option is to copy the text and paste it into MS Word, where you can simply move your mouse over the text to display the name of the font.

  Kind regards

  Nicos

• How to identify the Protocol of network storage using PowerCli

  Hi all

  Does anyone know how to identify the network storage protocol using Powercli? If you do could you please point me in the right direction and appropriate controls to be used.

  Thank you.

  See you soon

  With the Get-EsxCli cmdlet, you get to many of the features esxcli.

  Something like that

  $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list()
  

  You can use Select-Object to choose the specific properties of the returned objects.

  For example

  $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list() | Select RuntimeName,Transport