How to implement layers?

Similar Questions

• How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

  Hello

  How can implement you not with Time Capsule and AirPort their simulation on the iMac?

  I don't know what you're asking.

  AirPort Extreme is a wireless router.

  A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

  An iMac is a Mac computer.

  An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

• How we implemented personal signatures in Thunderbird?

  How we implemented personal signatures in Thunderbird?

  http://KB.mozillazine.org/Signatures_%28Thunderbird%29

• How to implement point filters fixed for FPGA

  Hello!

  I am applying the bandpass filter Butterworth for FPGA.

  I managed to develop filters of fixed point that suits my needs, but I don't know how to implement on a table in a project after the FPGA code generation. I tried to understand it in the examples, but I was not very successful.

  My time to finish what runs, any help would be really appreciated...

  Any suggestions?... some examples?

  Thanks in advance

  I've already done that and solved the problem.

  In any case thank you and have a nice day

  Ljubica

• How to implement the reading of data from a matte file on a cRIO?

  Hi all!

  I'm still not sure, it is plausible, but I'll ask rather before you begin complicating. So far, I found no useful information on reading in the data to a device of RT from a file (type of a simulation test - data is simulated).

  I have the MatLab plugin that allows the storage of data read a MAT file, which has a number of columns that represent the different signals and lines representing the samples at a time (depending on the time of the sample - sample every time has its own line of signal data).

  I have no idea how to implement this at cRIO.

  The idea is:

  I have some algorithms running on the controller of RIO in a timed loop. As the entries of these algorithms I need to access each of the values of columns in the row, which is the time of the sample (sort of a time series - without written actual times).

  I am fairly new to RT and LV development, so any help would be appreciated.

  Thank you

  Luka

  Dear Luka!

  I think the reading of all the samples in a single channel is exactly what you need here, because reading the files may take some time and is not deterministic, so it is best to read all the data in memory (or if this is not feasible due to problems of size, fairly large pieces may be sufficient). The table read can be provided and then in the loop simulating outings, something like this:

  

  I used here separate channels so it's more graphic, but you can build all the channels in a 2D array and array index corresponding to the samples fom 1 who. You can also use for loops with indexing as tunnels are setup and then you won't need the index functions and the number of iterations is also set automatically, but you have to take care of synchronization settings.

  Best regards:

  Andrew Valko

  National Instruments

• How to implement the wafer map using LabVIEW?

  Hello LabVIEW Masters!

  I have a project which includes control and searching for information on a PROBER. One of the difficulties I have now is how to implement a WAFER card using LabVIEW. According to the requirements of my client, the element of pads varies between 6 k and 23 k. I guess that do everything (a = a ctl/indicator led) will be a hell of a task, especially on how to effectively manipulate each elements. Does anyone have a better idea on the way whose that?

  Please, I seriously need your help...

  Thank you and best regards,

  Dennis DG

  Hi Dennis,

  This wafer GerdW post card appears to me as a sort of histogram (for example http://www.ni.com/white-paper/4158/en#toc3);

  Altenbach post well this example that shows how to use a plot of intensity to create a 2d histogram:

  http://forums.NI.com/T5/LabVIEW/overlay-plots-as-intensity-graph/m-p/211222#M119248

  Learn how it works and try to adapt it to your specific task.

  Alex

• How to implement Canopen on FPGA to run the engine using NOR-9881?

  Dear,

  Your support will be highly appreciated,

  There is only one available for NOR-9881 example.
   
  Please note that the following materials were properly connected:
  cRIO-9024, cRIO-9113, OR-9881 and motor Nanotec (SMCI36 against L2818L0604-T5X5), the following
  sites Web shows the engine Nanotec in details:
   
  http://us.Nanotec.com/products/660-L28-linear-actuators-with-trapezoid-spindle/
   
  http://us.Nanotec.com/products/1041-SMCI36-stepper-motor-and-BLDC-motor-position ing-control /
   
  The main problem is how to configure the inputs and outputs, where, in most examples, the entry and exit have been automatically
  configured.
   
  the following three examples and I wonder how to start:

  1 - example Nanotec: dependent VISA controls for data transfer
   
  http://us.Nanotec.com/support/application-notes/LabVIEW-example/
   
  2 - reference example CANopen for series C OR - 9853 Module CAN:
  the NOR-9853 has default Can0 which was used in the code

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6093
   
  3 - from finder labView example: search for 9881 then choose
  NOR - CANopen_cRIO.lvproj, which depended on SDO orders for transfer orders
   
  The attached picture shows that NEITHER-9881 can be seen, after compilation and
  loading the bitfile FPGA.
   
  Please, please advice me:
  1. how to start?
  2. how to create variables of entry for NI9881?
  3. how to implement CANopen mode FPGA? where there is no CANopen palette.

  Thanks in advance and

  Hello!

  From my understanding, the 9881 can be treated from the FPGA, but only from the application of the RT. I think that the point 3 of your post examples of the use of the module fine.

  Kind regards

  Georg

• How to implement interfaces or inheritance in LabVIEW?

  Hi all

  I try to implement oriented OBJECT in my LabVIEW code and require heritage or just an interface (such as might be required in java).  I have a good knowledge of OOP is just how do me in LabVIEW, I'm curious.

  I'll try to stick with my own example for now, so that someone is able to tell me exactly how to implement this.

  in any case, I have two different DMM and each come with their own GPIB commands to get the measures and set the measurement configurations.  This seems to be a perfect example to learn how to use inheritance.  I figured out how to make a class for each DMM but was curious as to how I might be able to create a parent class for each of them because they both require the same fields in their configuration (AC/DC, Measurment Type, rank, address VISA).  I think that I could create a parent class with these fields, then the methods of use of these fields and have then child classes inherit fields and override the methods of the parent class so that depending on what the user selected DMM, it would be able to use the correct class to issue the right GPIB commands.

  If anyone can point me to a good example or explain how this could be implemented in labview that would be super.  I'm also browsing the forums LVOOP to LavaG trying to figure this out, thanks!

  Brent

  Brent,

  LabVIEW help contains a lot of detailed information on the use of classes.  I recommend reading through it, before we begin with OOP in LabVIEW.  In the content of the Help window tab, search for "Fundamentals > LabVIEW Object - Oriented Programming > How - to's»  There is an article entitled 'change the legacy of a LabVIEW class' that should be what you're looking for.

  Chris M

• How to implement the ScreenUiEngineAttachedListener Interface?

  How to implement the ScreenUiEngineAttachedListener Interface? It is somewhat a mystery reading through the API.

  I have a class that implements ScreenUiEngineAttachedListener:

  public class UiListener implements ScreenUiEngineAttachedListener {
    public void onScreenUiEngineAttached(Screen screen, boolean attached) {
    }
  }
  

  Then I have a class MyScreen which extends from screen and has two methods:

  public void addScreenUiEngineAttachedListener(ScreenUiEngineAttachedListener listener) {
    super.addScreenUiEngineAttachedListener(listener);
  }
  
  private void removeScreenUiEngineAttachedListener() {
  
  }
  

  • What is the correct positioning of everything?
  • Can I define an instance of UiListener and pass in the addScreenUiEngineAttachedListener?
  • How to remove UiListener in removeScreenUiEngineAttachedListener?

  You will need:

  • an instance of your UiListener - probably a static member inside your UiApplication;
  • a method that allows to retrieve the reference to this instance of UiListener;
  • a call in your constructor for the screen at addScreenUiEngineAttachedListener (yourApplication.getUiListener ()) or similar;
  • potentially a call within your onScreenUiEngineAttached (attached screen, boolean) routine, the branch (attachment is false) : screen.removeScreenUiEngineAttachedListener (this);

  However, all this is too much work for no gain. Just override protected void onUiEngineAttached (boolean attached) in your screen class and make your logic there - all members of your class are accessible and all the code is placed where it belongs.

• How to implement QtSoap in native development of cascade?

  Hello

  I want to ask you something QtSoap implementation. I use QtSoap to parse the Web services *.asmx files. I include qtsoap.h and qtsoap.cpp from external sources, but I can't find the libraries.

  Can you help me solve this problem and how to implement QtSoap in native waterfall?

  Thanks before.

  I got this error message:

  Build configuration Debug-Simulator for BB10BinusmayaMobile project *.

  make - j2 Simulator-Debug
  do .//translations - C f Makefile update
  make [1]: Entering directory had: / ' Document Training/ndk-10.1.0-workspace/BB10BinusmayaMobile/translations
  D:, bbndk, host_10_1_0_132, win32 / x 86/usr/bin/lupdate BB10BinusmayaMobile.pro
  Update 'BB10BinusmayaMobile.ts '...
  Found 6 source text (s) (0 new and 6 already existing)
  make [1]: leaving directory had: / ' Document Training/ndk-10.1.0-workspace/BB10BinusmayaMobile/translations
  do .//translations f - C release of Makefile
  make [1]: Entering directory had: / ' Document Training/ndk-10.1.0-workspace/BB10BinusmayaMobile/translations
  D:, bbndk, host_10_1_0_132, win32 / x 86/usr/bin/lrelease BB10BinusmayaMobile.pro
  Update: / Document Training/ndk-10.1.0-workspace/BB10BinusmayaMobile/translations/BB10BinusmayaMobile.qm'...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Ignored for 6 text (s) of the untranslated source
  make [1]: leaving directory had: / ' Document Training/ndk-10.1.0-workspace/BB10BinusmayaMobile/translations
  make - c / f - 86 Makefile debugging x
  "make [1]: Entering directory had: / Training/ndk-10.1.0-workspace/BB10BinusmayaMobile/x86 Document"
  d:/bbndk/host_10_1_0_132/Win32/x86/usr/bin/qmake.exe-spec... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/share/qt4/mkspecs/BlackBerry - x 86 - QCC CONFIG += debug_and_release += o Makefile... simulator config BB10BinusmayaMobile.Pro
  "make [1]: leaving directory had: / Training/ndk-10.1.0-workspace/BB10BinusmayaMobile/x86 Document"
  "make [1]: Entering directory had: / Training/ndk-10.1.0-workspace/BB10BinusmayaMobile/x86 Document"
  do f Makefile.Debug
  "make [2]: Entering directory had: / Training/ndk-10.1.0-workspace/BB10BinusmayaMobile/x86 Document"
  CQS-Vgcc_ntox86 - c - Wc, - inclure-Wc,o-g/.obj/BB10BinusmayaMobile-Wno psabi - lang-c ++ - fstack-protector - fstack-protector-all - g - Wno-psabi-wall - W-D_REENTRANT-DQT_NO_IMPORT_QT47_QML-DQ_OS_BLACKBERRY-DQT_DECLARATIVE_DEBUG-DQT_DECLARATIVE_LIB-DQT_CORE_LIB-DQT_SHARED-j'ai... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/share/qt4/mkspecs/BlackBerry - x 86-QCC-... /... / BB10BinusmayaMobile-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/qtcore-... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/QtDeclarative-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4-I... / SRC-Io-g/.moc - I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include-I /... /.. /.. /bbndk/target_10_1_0_1020/QNX6/usr/include/freetype2-o-g/.obj/applicationui.o o I... /SRC/applicationui.cpp
  CQS-Vgcc_ntox86 - c - Wc, - inclure-Wc,o-g/.obj/BB10BinusmayaMobile-Wno psabi - lang-c ++ - fstack-protector - fstack-protector-all - g - Wno-psabi-wall - W-D_REENTRANT-DQT_NO_IMPORT_QT47_QML-DQ_OS_BLACKBERRY-DQT_DECLARATIVE_DEBUG-DQT_DECLARATIVE_LIB-DQT_CORE_LIB-DQT_SHARED-j'ai... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/share/qt4/mkspecs/BlackBerry - x 86-QCC-... /... / BB10BinusmayaMobile-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/qtcore-... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/QtDeclarative-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4-I... / SRC-Io-g/.moc - I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include-I /... /.. /.. /bbndk/target_10_1_0_1020/QNX6/usr/include/freetype2-o-g/.obj/main.o o I... /src/main.cpp
  CQS-Vgcc_ntox86 - c - Wc, - inclure-Wc,o-g/.obj/BB10BinusmayaMobile-Wno psabi - lang-c ++ - fstack-protector - fstack-protector-all - g - Wno-psabi-wall - W-D_REENTRANT-DQT_NO_IMPORT_QT47_QML-DQ_OS_BLACKBERRY-DQT_DECLARATIVE_DEBUG-DQT_DECLARATIVE_LIB-DQT_CORE_LIB-DQT_SHARED-j'ai... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/share/qt4/mkspecs/BlackBerry - x 86-QCC-... /... / BB10BinusmayaMobile-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/qtcore-... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/QtDeclarative-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4-I... / SRC-Io-g/.moc - I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include-I /... /.. /.. /bbndk/target_10_1_0_1020/QNX6/usr/include/freetype2-o-g/.obj/qtsoap.o o I... /SRC/qtsoap.cpp
  CQS-Vgcc_ntox86 - c - Wc, - inclure-Wc,o-g/.obj/BB10BinusmayaMobile-Wno psabi - lang-c ++ - fstack-protector - fstack-protector-all - g - Wno-psabi-wall - W-D_REENTRANT-DQT_NO_IMPORT_QT47_QML-DQ_OS_BLACKBERRY-DQT_DECLARATIVE_DEBUG-DQT_DECLARATIVE_LIB-DQT_CORE_LIB-DQT_SHARED-j'ai... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/share/qt4/mkspecs/BlackBerry - x 86-QCC-... /... / BB10BinusmayaMobile-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/qtcore-... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/QtDeclarative-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4-I... / SRC-Io-g/.moc - I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include-I /... /.. /.. /bbndk/target_10_1_0_1020/QNX6/usr/include/freetype2-o-g/.obj/webservices.o o I... /SRC/WebServices.cpp
  D:/bbndk/host_10_1_0_132/Win32/x86/usr/bin/MOC.exe-DQT_NO_IMPORT_QT47_QML-DQ_OS_BLACKBERRY-DQT_DECLARATIVE_DEBUG-DQT_DECLARATIVE_LIB-DQT_CORE_LIB-DQT_SHARED-j'ai... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/share/qt4/mkspecs/BlackBerry - x 86-QCC-... /... / BB10BinusmayaMobile-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/qtcore-... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/QtDeclarative-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4-I... / SRC-Io-g/.moc - I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include-I /... /.. /.. bbndk/target_10_1_0_1020/QNX6/usr/include/freetype2-I.-D__QNXNTO__... / SRC/applicationui. HPP o o-g/.moc/moc_applicationui.cpp
  D:/bbndk/host_10_1_0_132/Win32/x86/usr/bin/MOC.exe-DQT_NO_IMPORT_QT47_QML-DQ_OS_BLACKBERRY-DQT_DECLARATIVE_DEBUG-DQT_DECLARATIVE_LIB-DQT_CORE_LIB-DQT_SHARED-j'ai... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/share/qt4/mkspecs/BlackBerry - x 86-QCC-... /... / BB10BinusmayaMobile-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/qtcore-... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/QtDeclarative-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4-I... / SRC-Io-g/.moc - I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include-I /... /.. /.. bbndk/target_10_1_0_1020/QNX6/usr/include/freetype2-I.-D__QNXNTO__... /SRC/qtsoap.h o o-g/.moc/moc_qtsoap.cpp
  D:/bbndk/host_10_1_0_132/Win32/x86/usr/bin/MOC.exe-DQT_NO_IMPORT_QT47_QML-DQ_OS_BLACKBERRY-DQT_DECLARATIVE_DEBUG-DQT_DECLARATIVE_LIB-DQT_CORE_LIB-DQT_SHARED-j'ai... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/share/qt4/mkspecs/BlackBerry - x 86-QCC-... /... / BB10BinusmayaMobile-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/qtcore-... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/QtDeclarative-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4-I... / SRC-Io-g/.moc - I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include-I /... /.. /.. bbndk/target_10_1_0_1020/QNX6/usr/include/freetype2-I.-D__QNXNTO__... /SRC/WebServices.h o o-g/.moc/moc_webservices.cpp
  CQS-Vgcc_ntox86 - c - Wc, - inclure-Wc,o-g/.obj/BB10BinusmayaMobile-Wno psabi - lang-c ++ - fstack-protector - fstack-protector-all - g - Wno-psabi-wall - W-D_REENTRANT-DQT_NO_IMPORT_QT47_QML-DQ_OS_BLACKBERRY-DQT_DECLARATIVE_DEBUG-DQT_DECLARATIVE_LIB-DQT_CORE_LIB-DQT_SHARED-j'ai... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/share/qt4/mkspecs/BlackBerry - x 86-QCC-... /... / BB10BinusmayaMobile-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/qtcore-... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/QtDeclarative-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4-I... / SRC-Io-g/.moc - I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include-I /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/freetype2-i o o-g/.obj/moc_applicationui.o o-g/.moc/moc_applicationui.cpp
  CQS-Vgcc_ntox86 - c - Wc, - inclure-Wc,o-g/.obj/BB10BinusmayaMobile-Wno psabi - lang-c ++ - fstack-protector - fstack-protector-all - g - Wno-psabi-wall - W-D_REENTRANT-DQT_NO_IMPORT_QT47_QML-DQ_OS_BLACKBERRY-DQT_DECLARATIVE_DEBUG-DQT_DECLARATIVE_LIB-DQT_CORE_LIB-DQT_SHARED-j'ai... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/share/qt4/mkspecs/BlackBerry - x 86-QCC-... /... / BB10BinusmayaMobile-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/qtcore-... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/QtDeclarative-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4-I... / SRC-Io-g/.moc - I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include-I /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/freetype2-i o o-g/.obj/moc_qtsoap.o o-g/.moc/moc_qtsoap.cpp
  CQS-Vgcc_ntox86 - c - Wc, - inclure-Wc,o-g/.obj/BB10BinusmayaMobile-Wno psabi - lang-c ++ - fstack-protector - fstack-protector-all - g - Wno-psabi-wall - W-D_REENTRANT-DQT_NO_IMPORT_QT47_QML-DQ_OS_BLACKBERRY-DQT_DECLARATIVE_DEBUG-DQT_DECLARATIVE_LIB-DQT_CORE_LIB-DQT_SHARED-j'ai... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/share/qt4/mkspecs/BlackBerry - x 86-QCC-... /... / BB10BinusmayaMobile-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/qtcore-... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4/QtDeclarative-I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/qt4-I... / SRC-Io-g/.moc - I... /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include-I /... /.. /.. / bbndk/target_10_1_0_1020/QNX6/usr/include/freetype2-i o o-g/.obj/moc_webservices.o o-g/.moc/moc_webservices.cpp
  CQS-Vgcc_ntox86-lang-c ++ - Wl, - rpath - link, d, bbndk, target_10_1_0_1020, qnx6 / x 86/lib - Wl, - rpath - link, d, bbndk, target_10_1_0_1020, qnx6 / x 86/usr/lib - Wl, - rpath - link, d, bbndk, target_10_1_0_1020, qnx6 / x 86/usr/lib/qt4/lib - o o-g/BB10BinusmayaMobile o-g/.obj/applicationui.o o-g/.obj/main.o o-g/.obj/qtsoap.o o-g/.obj/test.o o-g/.obj/webservices.o o-g/.obj/moc_applicationui.o o-g/.obj/moc_qtsoap.o o-g/.obj/moc_test.o o-g/.obj/moc_webservices.o - LD : / bbndk / target_10_1_0_1020/qnx6 / x 86/lib - LD: / bbndk/target_10_1_0_1020/qnx6 / x 86/usr/lib - LD: / bbndk/target_10_1_0_1020/qnx6 / x 86/usr/lib/qt4/lib - LD: / bbndk/target_10_1_0_1020/qnx6 / / usr/lib/qt4/lib - lbbcascades - lQtDeclarative - lQtScript - lQtSvg - lQtSql-lsqlite3 - lz - lQtXmlPatterns - lQtGui - lQtNetwork - lsocket - lQtCore - lm - lbps
  D:\bbndk\host_10_1_0_132\win32\x86\usr\bin\ntox86-ld: o-g/.obj/qtsoap.o: reference to undefined symbol '_ZN12QDomDocument15createElementNSERK7QStringS2_'
  D:\bbndk\host_10_1_0_132\win32\x86\usr\bin\ntox86-ld: Notes: '_ZN12QDomDocument15createElementNSERK7QStringS2_' is defined in DSO D:/bbndk/target_10_1_0_1020/qnx6/x86/usr/lib/qt4/lib/libQtXml.so.4 try so add to the linker command line
  D:/bbndk/target_10_1_0_1020/QNX6/x86/usr/lib/Qt4/lib/libQtXml.so.4: could not read symbols: invalid operation
  CC: D:/bbndk/host_10_1_0_132/win32 / x 86/usr/bin/ntox86-ld caught signal 1
  make [2]: * [o-g/BB10BinusmayaMobile] error 1
  make [1]: * [debug] error 2
  "make [2]: leaving directory had: / Training/ndk-10.1.0-workspace/BB10BinusmayaMobile/x86 Document"
  "make [1]: leaving directory had: / Training/ndk-10.1.0-workspace/BB10BinusmayaMobile/x86 Document"
  make: * [Simulator-Debug] error 2

  Build completed *.

  QDomDocument part QtXml, if you check in the documentation of the API
  https://developer.BlackBerry.com/native/reference/Cascades/QtXml.html
  you see that:
  To connect the module, add this line to your qmake .pro file:
  QT += xml

  try this.

• How to implement the SOA 11 g limitation?

  Hi all

  Can someone tell me how to implement the limitation in SOA to create a repository for the history of the transactions?

  ARO

  Hari

  Hello

  By Greg Mally of Oracle message covers an approach to the limitation in SOA Suite

  https://blogs.Oracle.com/soacommunity/entry/throttling_in_soa_suite_via

• Found that the solution does not know how to implement

  Hello

  In my reports (using oracle obiee 11.1.1.7.0) I need to display the values in the chart in percentage and value at the same time, but I don't know how. (for example in a pie chart, I can only see one, either the actual value or percentage of the slice)

  I found this solution the percentage and value of pie , but I do not know how to implement it.

  The solution is to apply this:

  FormatString = '_VALUE %, _PERCENT_OF_CATEGORY % '.

  
  

  OK, but where? and how

  Anyone want to explain further? Thank you
  

  Thanks ofr version information.

  As I said, the solution of John was for 10g, which means a version where OBI has always used the engine Corda to render graphics, and so there was the *.pcxml files which you can hack.

  This solution is no longer applicable since 11g and I think that there is no work around at the moment. At least the last thread of 5-10 on the subject gave no tangible results IIRC.

• How to unlock layers?

  How to unlock layers?

  If the layer of background, said you can drag the lock in the trash. If it isn't, then you can click the icon at the top of the layers panel that is enabled for this type of lock.

  If you need more information, capture your layers panel with all the layers expanded so we can see what's happening. Also the OS of your computer, this is version and the version of Photoshop.

• Is there anyone who knows how to implement the P3 Colorspace in first CC2014?

  
  

  Is there anyone who knows how to implement the P3 Colorspace in first CC2014?

  Hi RVBBernard,

  Sorry, there is currently not available in Premiere Pro. You can request a feature here: http://adobe.ly/feature_request

  Thank you

  Kevin

• How to implement the process of climbing BPM 11 g?

  Hi Experts,
  
  Can any help with process step by step how to implement climbing for 3 levels...
  
  For example, User1 doesn't complete the task at some time say 1 day then this task must be wound to its Director Say User2 and if is not finish it even then it must be the second Director of level for 1 day as well for the third level manager.
  
  Note:
  Where as one when user 1 task is up to the manager (User2) then user 1 tasks should be sent to the User2, even if its value from table.
  
  Please please experts throw some idea on this with an example...
  
  
  Kind regards
  Pavan

  Hi Pavan,

  There are couple ways to do this. This is the very detailed description of what you would do if you want to set your climbing inside the process using the timer to limit events.

  1. Add three interactive activities and put them in three roles representing the roles for your users 1, 2 and 3.
  2. Add a "Timer intercept the event" on the edge of your Interactive activity for your user 1. Associate the new timer event with Interactive activity for your user 2. This will create a new event of border and climbing you want for the user 1.
  3. the name of the new event to limit 'Question degenerate'-> in the "Application" tab, define the new event of the timer limit as an event interrupting-> specify the range to be "1 d" (one day).
  4. in the same way, add another event of the timer limit interruption between your interactive for user 2 and 3 activities.

  I could have missed something, but it looks like your table is just a process data object variable that will be made as part of the payload with the work item instance when he travels through the process.

  For human tasks for user 2 and user 3, you must assign the task to the Manager of the previous participant.

  Hope this helps,
  Dan