How to install a PHOTO HP 564XL ink cartridge in the printer all-in-one HP Photosmart 6525?

I have a HP Photosmart 6525 all-in-one printer.  I buy original HP 564XL ink for my printer in a color combo-pack at my local Costco.  The package includes 3 color cartridges as well as a 4th label "Photo".  My printer has only the slots 3 color + a location for a larger black cartridge. I would use the photo cartridge, but my question is:

How to install the Photo cartridge?

Thank you in advance for your help!

Hi l_john,

I understand that, with the combo, pack of ink you bought came with a Photo black cartridge, and you're wanting to use it in your printer. In regards to your printer, it is not compatible with the black cartridge Photo, both black and Photo black cartridges are not interchangeable. I have included a document here for you that explains this in detail.

Thank you.

Tags: HP Printers

Similar Questions

  • HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

    HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

    I DO NOT PRINT A LOT AND I HAVE TWO PRINTERS. THE EXPIRATION DATE ON THE CARTRIDGE, THE PRINTER DOSE NOT LET ME PRINT. I KNOW THAT THERE IS WAY TO OVERRIDE THIS PROBLEM, BECAUSE ON MY PREVIOUS PRINTER THEY REPLACES THE KEY.

    The error message itself will remain but will continue to print. This message will remain until the cartridge is replaced. Substitution is the printer printing always regardless of the error message on the display screen.

  • printer 6510: can I use 934 ink cartridge in my printer all-in-one 6510?

    Can I use 934 ink cartridge in my printer of 6510 all-in-one?

    The cartridge HP black 934 works with these printers:

    HP Officejet printer, 6220
    E-all-in-one printer, HP Officejet 6812 range
    E-all-in-one printer, HP Officejet 6815 range
    Printer HP Officejet Pro 6230
    Printer HP Officejet Pro 6230
    E-all-in-one printer, HP Officejet Pro 6830 range
    E-all-in-one printer, HP Officejet Pro 6835 range

  • HOW can I SUBSTITUTE of INK CARTRIDGE EXPIRATION IN HP all-in-one 8600

    HOW can I SUBSTITUTE of INK CARTRIDGE EXPIRATION IN HP all-in-one 8600

    Hi @jfinny,

    I am able to provide you with more information about your printer model 8600 and its ink delivery system.

    Only some models of HP printers supports a substitution.

    If supported by your printer, when you print, you should be prompted to press OK on the printer to continue.

    If you do not get the prompt to click OK, your printer will deal with the similarly outdated cartridge as it does a cartridge missing or empty. It is designed to protect the entire printhead inside the unit.

    You can view more information about these resources:
    Consumable inkjet HP - ink Expiration

    Cannot print when one of the HP ink cartridges is empty

    You can also take a look at the limited warranty for print HP ink and print heads replaceable by the customer of consumables HP inkjet cartridges.

    I found this information in the HP Officejet Pro 8600 - User Guide, but I don't know if it helps at all;

    Used with this printer HP cartridges contain a memory chip that helps with the use of the printer. More, this memory chip collects a limited set of information about the use of the printer, which may include the following: the date when the cartridge has been installed, the date where the cartridge of the last use, the number of pages printed using the cartridge, coverage of the page printing modes used, any printing error that occurred and model of printer. This information helps HP design future printers to meet the printing of our customers needs.

    To disable the collection of usage information:
    1. on the printer control panel, press the arrow to the rightand then press Setup.
    2. Select Preferences, and then on cartridge chip information.
    3. press OK to disable the collection of usage information.

    NOTE: If you disable the memory chip's ability to collect information on the use of the printer, you can still continue to use the cartridge in the printer HP.

    I would like to know if there is anything else I can do to help.

    I look forward to hear from you!

    Thank you

  • How to print photos directly from my e-3510 HP printer all in one?

    Using a Windows 7 Pro Office, how to print photos directly on my HP 3-3510 al-all-in-one printer (without the use of the internet)?

    Hi naturescoopand thanks for the reply.

    I'm sorry for any confusion on my part.  I would recommend following the steps described in this document on Print Photos stored on your computer.

    I would also recommend using the steps described in this document to print a photo, in addition to this document on printing with Windows 7

    Please let me know how it goes!

  • All-in-one HP Officejet J4680: compatible MICR of ink/HP Officejet J4680 printer all in one

    I HAVE A HP OFFICEJET J4680 PRINTER ALL-IN-ONE. I NEED TO BUY A MAGNETIC INK TO RUN PAYROLL AND ACCEPTS PERSONAL CHECKS.

    1. THIS PRINTER ALLOWS THE MAGNETIC INK?

    2. IF NOT IS THERE A COMPATIBLE AVAILABLE FOR THIS MODEL AND THIS MODEL MICR INK ACTUALLY SUPPORTS COMPATIBLE INK?

    3. WHERE DO YOU BUY COMPATIBLE INK / MAGNETIC INK AND MAGNETIC PRINTERS?

    I CALLED THE LOCAL OFFICE SUPPLY STORES AND THEY DON'T SEEM TO BE FAMILIAR WITH EITHER.

    Thank you

    Hi @nola398 and welcome to the Forums of HP!

    I see that you are looking in magnetic ink.

    Magnetic ink is not something HP offer, so I can't really talk about its compatibility.  You can, however, give us a call and see what additional information are available.  You can use this website to find out how to contact us in an appropriate way, based on your region:

    Contact HP worldwide

    Thanks for posting on the HP Forums!

  • I replaced the ink cartridges, but the printer still shows empty black cartridge. How can I reset?

    I have a HP Deskjet 3050 a - J611j all-in-one printer.  I use Mac OS 10.7 Lion.   I replaced the empty ink cartridges.  Now it shows the color cartridge is full, but still shows black cartridge empty.  Is it possible to reset it?

    Hi Shanmarie1103,

    If the cartridges are rebuilt you will not get a read out on the ink levels. You will need to use a new OEM cartridge with a new chip for the ink levels. Click on the links below for more information.

    The truth about remanufactured ink and toner cartridges

    Price of ink

  • Fill new used ink cartridges refilled HP 1510xi all-in-one.

    I have 5 HP printers and still actively using 3 models of all-in-One: 1510xi; 5610xi; and J6480.  Reloaded 1510xi black cartridges (6) 92 (1) color cartridge 93 and 92 all will not work after update to install HP all-in-One. HP updates may have put an end to refill these cartridges. I had no problem before and refills limited to 4 or 5 max before you buy new cartridges.

    All cartridges except for the color display the error and won't print.  I replaced these cartridges with those who have not refilled and error warning does not, so it seems to be updated.

    Has anyone encounter this type of problem? Or know a solution apart from buying new in the use of reloaded cartridges?

    The only solution I know is using new genuine HP ink cartridges. Using ink filled or rebuilt is bad for the printer. If you have printers that are still under warranty, filled or rebuilt ink using the warranty of ink systems. The rest of the printer is still under warranty, but the print head and of any other part of the system of ink will not.

  • Problem - has ink cartridge but no printing appears on the paper

    I have a printer of HP Deskjet 4200 all-in-one with a relatively new ink cartridge.  The printer prints white - nothing appears on my paper.  The last time I used the printer (with the same cartridges) was four months ago, and he was fine.  To my knowledge, nothing has changed (parameters, etc.).  I can't figure out how to get the printer to print anything.  I could go out and buy new cartridges, but ones I have is barely used, although only around the age of 6 months.  And the problem seems to be both color and black print (printer has two cartridges) - so I made me think that it would not be a cartridge problem.  Any suggestions on what I might try?  Thank you.

    It is possible that the print heads have become clogged due to sitting for so long unused.  Try to run the three cycles of cleaning of the Toolbox.  If it does not recover the printhead, then place 1 "of very hot water in a cup and watch the nozzles of cartridge in hot water for about five minutes.  When it comes gently dry the printhead on a wet cloth dry contacts of the cartridge, then reinstall the cartridges in the printer, and try another cleaning cycle.

  • Advantage of ink HP deskjet 5525: I can't find the ink cartridge for my printer

    I bought a printer HP deskjet ink advantage 5525 in Saudi Arabia, then I brought it to the Philippines, I found the same ink cartridge for the printer here (655 in Saudi Arabia, in the Philippines, it is 685) but the problem is my printer rpet ink, I bought is not compatible. What should I do? Thank you

    Hello

    You must contact HP Office in your country now and ask them how to reset the printer to allow to use inks in the new country. Please read:

    http://support.HP.com/us-en/document/c02558798

    Kind regards.

  • All-in-one HP Photosmart C7280: black ink on back of paper edges

    For about 3 months now, when I load the paper tray there are black ink on the back edges right of paper - no where else, just here.  I have completed the process of realignment 3 times and cleaned printer heads.  Black spots still there.

    Any suggestions - I'm going through a lot of paper!

    Hi cookie826,

    Thank you very much for your answers.

    It looks almost as if the ink cartridges or the print head in the printer. At this point, I would like to recommend please contact HPtelephone support more assistance to repair the printer / or replaced. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    Good luck!

    "Please click the Thumbs up icon below to thank me for having responded."

  • Refilled ink cartridge does not print

    I put a new ink cartridge in the printer by default printer Hp laserjet 3020, but it prints as if the cartridge is dry.

    Hi Alma,.

    According to the description of the problem, you cannot print after changing the cartridge for your HP printer. I suggest you to see the steps provided in the below items and see if it helps you to solve the problem.

    Product HP LaserJet 2820, 2840, 3015, 3020, 3030 and 3380 AiO - quality Image scan and copy troubleshooting

    HP Deskjet 3520 printer - color or black ink prints do not

    Note: This article is for HP Deskjet 3520 but steps holds too good for HP Laserjet 3020

    Along with this, you can refer to the Manual of HP Laserjet 3020.

    Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

    Kind regards

  • can I print just using blk ink only w / my hp c7100 series printer all in one

    can I just use blk of ink to print to the printer hp w / my c7100 all-in-one series

    Hello

    You can print in B & W, but you still need all of the ink cartridges. The printer does not start if no inks during the reheating process (when the printer).

    Kind regards.

  • How to check ink levels, clean the print heads in Windows 7

    We have a range of printers hp psc 1210 xi & win 7 32-bit. How can we check the ink level, clean the print heads, etc. ? I tried to print a test page, but there was no information about it on the ink levels.

    Here's how you can print a self-test that you provide ink levels and clean the print head:

    1. From the front panel, press and hold Cancel and then press Color Start.
  • How one properly installed more than one printer all-in-one (different) on the same pcr?

    Once installed 1 All in one printer, how one installs another printer all-in-one (different model) on the same computer without altering the first installation because all software are the same for each all-in-one printer, with the exception of different drivers linked to each different model all-in-one printer?

    Hello Boothkp,

    From what I can understand in your post, you are looking for a solution install several all in printers on one system, without causing problems during the first installation. This can be easy.

    Lets say you have 2 printer that both use the version 14 of the HP Solution Center software. Then, you install the first complete printer with all the software you want to use. The second installation, you just select the option 'Add printer' or 'Add features', this will add then the second printer in the current center solution without a conflict.

    In case this does not work, then please give more information on the model and the operating system you are working on.

    Kind regards

    Van Baardewijk

Maybe you are looking for

  • unexpected text displayed in the lower part of the browser

    Hello.A message began to be displayed in the lower part of the browser, please see the attachment.With the help of 45.0a1 (2015-11-25) Nightly 32-bit version.Config, I added a photo with the corresponding entries of xul.How can I get rid of this mess

  • All messages from my Thunderbird account disappeared. How to recover?

    I use Thunderbird on my desk for a year now and has hundreds of incoming and outgoing messages. When I logged in yesterday morning all emails have disappeared. Inbox, sent, drafts, etc., were completely empty. What happened and can they be found?

  • Mailto are not

    When you try to set the mail client by default Firefox (Menu-> Options-> Applications-> Content Type) "mailto" is not a listed option. I don't know how to set this if it is not listed as an application or how to recreate as a "content type". Any sugg

  • Remove the sidebar in the Terminal application

    This sidebar appears randomly in the terminal app a few weeks ago. How can I remove it?

  • control array element changing order

    I have observed several times where some of my paintings of controls have their items change order between debugging sessions. It's unpredictable when it happens.  But the symptoms amounted to my controls bad secondary control (for example, LED #2 ge