How to install the external monitor

Similar Questions

• Portege R600 - how to use the external monitor on the docking automatically

  Hi - I just got a new Portege; R600-102. It's a great machine - very light and fast.

  I connect to a Slim port replicator to the office and I wish I could anchor and automatically use the external monitor without opening the laptop. Can someone point me in the right direction on how to do it? This process has worked well on my recently retired Dell X 300.

  More precisely:
  # I have the laptop closed Portégé and standby mode
  # I anchor in the Slim Port Replicator (SPR)
  # I press the button 'on' on the SPR
  # I see the message "recovery windows" and the bars of the countdown on the external monitor. (So I know it's connected and you can see the external monitor)
  # The laptop turns on but use the laptop screen (private) LCD
  # I have to open it and manually tell it 'out to watch.
  What can be automatically?

  Thanks for the tips.

  Post edited by: ExDirectory

  Hello

  You use Windows XP Home or Vista edition?

• WT8-B-102 - how to connect the external monitor

  Hello

  I have a toshiba WT8-B-102 Tablet and I need to connect an external monitor (vga or hdmi).
  My tablet doesn't have an hdmi port.

  Any solution?

  Best regards
  Francisco

  Hello

  WT8-B-102 does not therefore support other output micro HDMI port the connection to an external monitor or TV isn t possible.

  But as far as I know the Tablet supports the wireless display technology (Miracast / Intel WiDi) and if the TV supports the same technology, you should be able to output the internal display on TV s screen too.

• How to run the external monitor and Portege S100 together

  I am trying to add a second monitor to my S100. But I can't get the second monitor screen and laptop to work at the same time. (Display settings never 'sees' a single monitor.)

  Other forums on this site suggests that it is something to do with the factory presets. But I can't find out how to change these on my system. Any ideas? I am running Windows Vista Home Premium.

  Hello

  Usuallyy, you can switch between display devices using the function FN + F5 key.
  Have you tested this function?

• How to connect the external monitor to Satellite T130-C17?

  It has a HDMI port on my laptop and I would use it to connect to a monitor...
  The monitor supports DVI and VGA...
  So I thought that buying a VGA-HDMI would do the trick...

  Unfortunately, when I plug it almost doesn t do something...
  I want to use the monitor as my monitor 3rd btw. That's why I want it on the HDMI port.
  The resolution isn't really a problem for me because I put t want to do something great graphics on it anyway.

  For me, it makes sense to use the HDMI Cable DVI and not to use the VGA port.

  This third monitor is a little strange to me.
  You want to connect two external screens/monitors to your laptop satellite?

• How to connect the external monitor for Qosmio G30 with a HDMI cable

  Hello

  I have G30 also I have Samsung 32 LCD screen LA32S8
  I have the HDMI cable. I'm trying to connect the Qosmio G30 with the LCD screen and watch nothing displayed.

  I would also like to ask;
  Can I use the LCD screen as a monitor for laptop or I plug it into the PC output?

  THX and I need this help.

  Hello

  1. attach a TV or monitor to the Qosmio G30 HDMI while both units are in a State "turned off the power.
  2. turn on the TV or monitor first and then the Qosmio G30.
  3 Qosmio G30 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV or monitor.

  Check it out

• How to make an external monitor the default parser

  How to make an external monitor to be the value by default when you plug it.

  MBAir, OS X (10.11.4) connecting to Samsung SyncMaster 220WM

  Section: Extended desktop

  "In the pane display preferences system, each blue box represents a screen that is currently connected. The size of each box is compared to the current resolution of the display that it represents. In the example shown below, the larger box on the left represents a 27 Apple"Thunderbolt display, while the smaller box on the right is built-in to a 13" MacBook Air (Color LCD) display. »

  "The left white bar at the top of the blue box represents the menu bar, you see at the top of your screen. Menu bar placement determines which screen is treated as main display in OS X. To change the main screen, click and drag the white bar from one blue box to another. »

  https://support.Apple.com/en-NZ/HT202351

• How to find out the resolution of the external monitor max on Satellite Pro A100-02Y

  I have a Satellite Pro A100-02Y.

  I want to launch an external monitor but don't have any idea how big a monitor will deal graphics drivers. How will I know?

  Thanks for any help.

  Hello

  You should keep one fact in mind that the available screen resolution depends on the graphics card and the graphics card driver.
  If I'm not mistaken, you can find the max somewhere graphics card resolution information in the user manual.

  But note; If the graphics card driver does not support you favorite resolution then you will not be able to use and to choose!

  In the properties of the graphics card, you can find the available screen are supported by GPU driver resolutions.
  Usually these resolutions could be used on the external monitor, but only if the external monitor takes care of everything.

  Best regards

• Satellite P300 - screen is broken - how activate the external monitor

  My screen is completely broken.
  I hung on a desktop to the laptop monitor.
  I need to know to turn on the broken and the other external.

  I turn on and I am looking for an a little glowing screen and cracked and broken.
  I don't know this may be to do I don't know what buttons to push because I see a screen.
  IHIS, this is my first Forum ever thanks!

  Hi mate

  I recommend using the FN + F5 key combination
  You can use it to switch to output the external monitor or TV.
  This key combination supports several options:
  -screen internal + external display
  -external display only
  -TV out
  -etc...

  You have to press FN + F5 several times in order to get the right output.

• How to reset the default monitor on Acer 2920, computer laptop think always connected to an external monitor

  Hello, I hope you can help me! I have a laptop Aspire 2920 with Windows Vista Home Edition O.S. It starts and works fine except that after I used it with an external monitor (a tv screen) on the possibility of using the external monitor, it only now starting to think that the monitor is the flat screen tv and doesn't recognize the normal screen of the laptop. The laptop screen is now "pixeled" and shows only like 2/3 of its total width. I checked in Control Panel and it has recorded as the 'normal' monitor flat screen, but I can't way a find to tell the computer that the monitor is the same as usual and not the flat screen tv. Thank you!!!

  Dear Lawrence,

  I ve solved the problem.

  Do you have your suggestion to reset and did not work, but keeping your idea, I hooked to an external monitor, mounted in Control Panel, remove the "non-existent" monitor in the device section.

  At this point, I had no image at all in the laptop and only the external monitor.

  Turn off the computer and then reset the power supply.

  Because the computer did not all other monitors, he then had to use the one by default with the default resolution, etc..

  Thanks, it was a great help!

• application (adobe reader software) opens in the external monitor; How can I do ap open in the primary?

  Running Win 7/64 with 2 monitors.  Program opens in the external monitor, not primary.  Have you tried a primary mobile window, exit ap, then re-opening: no solution.

  Hello

  ·          The same thing happens with other programs?

  Try this:

  a. open a PDF file. Now, UN-maximize the file. Hover over to the other monitor. Now, close the document WITHOUT maximizing it on the new monitor.

  b. now try to open a PDF file. It should open on the new monitor. Blow it up and close it again. Now, a new PDF opens on the new monitor, and it will be maximized when opened.

  c. therefore, apparently, the trick is to close when it is not expanded on any monitor you want to open on. Adobe will remember whether or not a document has been expanded and open PDF one another in the same way, but it will update the monitor to use when a document is closed so that not maximized.

  Look at this link in the Adobe forums: http://forums.adobe.com/thread/392726

• How the external monitor, my main screen and not the laptop?

  I went to devices-> project->, extend, but the only option seems to be the laptop as main screen and the secondary monitor. I would like to the external monitor to the main screen. I did it on other computers, probably, it is possible with the updated technology?

  Any help would be appreciated.

  Thank you

  Hi tide,

  I suggest you follow these steps on an external monitor as the primary display.

  a. drag from the right edge of the screen, tap settings, and then click change PC settings.
  (If you use a mouse, point to the corner bottom right of the screen, move the mouse to the top, click settings and then click Change PC settings).

  b. press or click on PCs and devices, and then tap or click on display.

  c. in the image preview, tap or click the monitor you want to use as the main screen for the select.

  d. Select the checkbox make of this my main screen .

  See the article for more information.

  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

  Note: applies to Windows 8.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• Turn off display when you use the external monitor R61?

  Hello

  I have a ThinkPad R61, which I use with an external monitor.  Somehow, I had in place for months with the laptop out of the screen and the monitor on.  I've used today at a meeting to feed a projector, selected somehow dieting Fn F7 of presentation such as the screen and the projector are-as I wanted - then home, re-installed with my external monitor and cannot find out how to turn off the display on the laptop.  The selections under Fn F7 do not allow this combination.  I tried the trick you offered, Fn F3 to turn off the display, but it turned out the two views.  (Now, how can I reverse this setting?)

  It sounds like a requirement of switching every day, but I can't find a clue in aid of ThinkVantage, manual mini, on the website, etc.  Thank you

  WaynO salvation,

  After pressing Fn + F7, click on manage plans... to open the Director presentation window. Then click the new... button. You should be able to put in place a system to only display on the external monitor. After setting up, make sure to check the box in the column Menu Fn + F7 to have your new schema appears in the menu when you press Fn + F7.

• I can't enter the bios using the external monitor

  Hello, I use Dell Inspiron n4010 for the last 2.5 years. My laptop monitor stopped working that's why I bought an external Dell monitor... Its works fine but I need to install the windows now... Unfortunately, I cannot get into the BIOS of the external display and can not change the device to initialize DVD ROM.

  Please can someone tell how to enter the BIOS using the external monitor (I put it as a main monitor, but it still does not work)? The Monte screen after windows starts... Is it possible to get it back? Help, please...

  Yes - I know - it's what I'm trying to show you how!

  If you follow my instructions in my last post, you will see nothing for the "six seconds".but the startup process stops at the BIOS screen and FN & F1 or F1 key will rise from the dead internal to external monitor.