How to interface a sensor with IO-Link

Similar Questions

• How to use HX85BA sensors with NI DAQ system?

  Hello

  I'm trying to connect two sensors of Omega HX85BA moisture to my NI DAQ system. The sensors detect moisture, barometric pressure, and temperature, using three 0 to 10 VDC positive outputs @ 10 mA or less, with a common thread of output. I have a SCXI-1000 chassis with two modules SCXI-1100 cards, 1102 b and a single 1102. Map of 1102 uses a block to connect SCXI-1303, while the other three cards use some 1300 years. The system will mainly use thermocouples for temperature measurements, but there will be other types of sensors, such as the two HX85BAs.

  The manual of the product for the HX85BAs is not very clear on how to connect the sensor to the system. Terminal blocks each have 32 channels with the positive and the negative screw terminals, it doesn't connect three positive sensor outputs to individual channels, with the municipality of output connected to each channel? It will work installation with SCXI cards I have, or I will have to purchase different cards? The system will be expanded to include at least 4 cards in a separate chassis SCXI 1000 more, is not a problem for the purchase of different components to adapt to the HX85BAs.

  Thanks in advance!

  Hi BBalmforth,

  You can connect the sensor to the SCXI-1100 1300 TB. Connect the positive output of CH + and CH - CHSGND. Common output wire must be connected to GND.

• How to send an email with the link that has the user id?

  Hello everyone, I'm trying to send an email with the link that includes the user id. After users click the link, they should be able to see the form with their information that has been previously fulfilled. So my question is after I have send email how and what is the best way to get information and show it to the user. What should be separate page with the cfquery limited on the id user or something else? If anyone has an idea of what is the best way to do it please let me know. I already have my code who send e-mails.

  You save all the fields submitted initially to a database?  If so, run a query and then convert them to the form field, query values. I don't know what looks like your data (or database), but a simplified version might look like this.

  SELECT FirstName

  OF SavedFormTable

  WHERE ID =

• How can I send parameters with a link?  How to read the settings in the linked page?

  I need to send the file name of an image to display on the linked page and can not find a way to do it.  I'd appreciate any help!

  With the help of PHP, the parameters are sent by the url like this:

  http://MyPage.php?name=$ name & state = $state

  Before the link to appear, the values of $name and $state must be true, like this:

  $name = "George";

  $state = "Nebraska."

  The receipt page (mypage.php) receives the variables like this:

  $name = $_GET ['name'];

  $state = $_GET ["State"].

• inductive proximity sensor with DAQ

  Hello world

  I'm planing to connect my inductive proximity sensor with DAQ of NOR-9215 but won't be sure this thing work perofectly. Also I do not know how to connect my sensor with the BNC Terminal.

  The sensor that I use is Automation direct AM9-05-1A with a voltage of 10 to 30 VDC and output voltage of 0-5 VDC range.

  I want DAQ to monitor my output signal of the sensor.

  It seems that you have two choices.

  1. cut the connector from the sensor and cable drivers appropriate for a piece of coaxial cable with a BNC connector plug (and separately to the power supply).

  or

  2. get a socket that fits the plug sensor cable and its terminals to wire to a coaxial with BNC Plug cable and power supply.

  Lynn

• How the interface with my RND4000?

  I'm a replacement IT here. I have almost no notes to work from, and I've never used a SIN.

  How the interface with my RND4000? I tried to put the IP address in a web browser and you get "unable to connect".

  I think the NAS is supposed to be "hosted" on one of my servers. How to determine what is the server?

  Hello Helpdesk-Kerry,

  Then, it should be accessible. Perhaps, try another computer if after restarting it does not open yet?

  Kind regards

• The Web of LabVIEW user interface directly to the sensor with Ethernet connection

  Hello

  Is it possible to connect to the interface user Web of LabVIEW directly to a sensor with Ethernet connection?

  By directly, I mean without using any Web Service LabVIEW VI.

  Thank you

  Marcelo

  Hello

  The only communication with other devices using the Web user interface designer is through web services, either motorized or not LabVIEW. To connect with a sensor with the generator of the user Web interface without using LabVIEW, the sensing device must be accessible via HTTP and give you a way to read its data using XML web services based on.

• How to activate a part of an image with a link when creating emails?

  How to activate a part of an image with a link when creating emails?

  Hello. You can do this with an image map, but there are some questions that you need to consider before using a. Check out this blog for some thoughts on the subject:

  http://www.campaignmonitor.com/blog/post/3475/image-maps-in-HTML-email/

• I have a pdf very complicated with many links. I need to link individual file words that are in a series of folders. How can I connect to a folder instead of just a file?

  I have a pdf very complicated with many links. I need to link individual file words that are in a series of folders. How can I connect to a folder instead of just a file?

  If you set the link to the PDF files, then use the command "Go to a page view", then link to the specific location in the file that you want to run when the user clicks on the link. If you have a link to other file formats, then use the command "open a file". Remember that these links are relative (if the other file is on the same drive as the source file), so if you move the PDF file you need to move these files and folders with him or the links are broken.

• How can I associate my Blog navigation button with a link of HubSpot?

  I created my main navigation with a menu widget in Muse. All my buttons automatically take me to the correct pages respectively (home, About Us, Blog, contact us, etc.). However, I want to Blog button a link to a page of HubSpot. How can I ask for a hypertext link to the Blog button then it goes to the HubSpot page and not the Blog page I put in place in Muse? Thank you!

  Here is a thread with a similar query - http://forums.adobe.com/message/5632783#5632783.

  Thank you

  Vinayak

• How to send the value of the prompt to an another dashboard with action link?

  Dear all,
  
  I find how to send the parameter to a different dashboard with the link of the action.
  
  URL = http://hostname/analytics/saw.dll?Dashboard & PortalPath = % 2Fusers % 2Fweblogic % 2FMartin % 20Test % 2FMartin & Page = page 1 & Action = Browse & P0 = 1 & P1 = eq & P2 = entity. "" Gen6, entity ' & P3 = % 22EntityCode % 22
  
  But I don't know how to send the value of the command prompt. I tried @{EntityCode}, Entity.Gen6, Entity, etc. None of them worked. They just be send as a string.
  
  Anyone know the solution? Thank you.
  
  Best regards
  Martin

  Try to do a manual URL to see if it works. Static variables are called as Valueof (variable) and presentation of variables such as @{variable}
  Discover th url below and add your variables as needed and of course override other settings.

  '' || Link | ''

• Matching C20 with ISDN link question

  Hi, can someone help me on initial connectivity C20 with ISDN link? I C20 codec with 1 LAN port which is connected to link ISDN endpoint port, the link ISDN of LAN port is connected to the internal network. I configured the IP Link ISDN: XXX.XXX. XXX.251 and codec on XXX.252 both are the same subnet.

  Given that a single LAN port, how can I access the web interface of the codec to check and perform pairing? If in case, the codec is on firmware older supporting not pairing function so how can't I perform manual synchronization. Cannot access the ISDN link by series.

  Hello

  CAN´t you just plug your PC on the network internal (same subnet as the ISDN link and the codec) and access the Web interface of the codec: http://x.x.x.252 ?

  What versions of software are you using?

  / Magnus

• How can I get assistance with my Apple Care Protection Plan when I am abroad

  How can I get assistance with my Apple Care Protection Plan when im abroad?

  I brought an iPhone 6Plus in Europe and now I am traveling

  I would like to know if Apple Care Protection Plan cover me in the United States and what I can do

  Hey there, Aleji!

  Based on your post, I understand you have a few questions about your AppleCare protection + plan, and where coverage is available.

  You can get more information on your cover in the next article.

  About your coverage options and support services

  Additional information about the warranty is also available on the link below. Simply select your device and the region.

  The hardware guarantee

  Have a great day!

• How can I download videos with RealPlayer?

  When I've upgraded to FireFox 13 my Plugin RealPlayer browser Record has been disabled as dangerous and unstable. Now I can't download videos that I watch with RealPlayer. When I activate the Plugin, I can't watch the video (I get a blank video screen). So, how can I download and save videos I want like those on the pulse of the planet by Rick Levine or other sites with recordable video? I downloaded and installed the latest version of RealPlayer and they say that I will be able to download videos but I can't. This problem is also related to this Plugin disabled?

  Hi all Freaked Out Firefox and RealPlayer users,

        This is the proper workaround for the problem of not being  able to see videos after the Adobe defective 11.3 update (either the 11.3.300.257 or the latest 11.3.300.262) and  not being able to download them with the RealPlayer Browser  Record Plugin extension because Firefox disabled it.You can  enable it but you won't be able to see videos unless you roll  back the defective update and disabling the extension doesn't even work  for some users to even let you see videos, much less download them. I successfully tested   uninstalling adobe's update 11.3  and reinstalling with two  different versions  - 10.3 and 11.2 and posted this on other  threads beginning 6/11. People who have tried it have been  very grateful once they stopped listening to all the  confusing and misleading recommendations by Firefox and  Adobe. It's the ONLY one that gives full use of RealPlayer as  well as updated security on the Flash Player and I've  provided  the most direct link to that version without having  to download a cumbersome .zip file. It's a link to the 10.3  version. You will see other references to the 11.2 version on  this thread. Although I tested that first and it works  equally well, there are known critical vulnerabilities as  reported by Secunia and Adobe,so I don't recommend it unless  you have top security software. I do, and had no trouble with  it. The 10.3, however, is up to date on security and works  equally well -I've tested both. Just remember to enable the  RealPlayer Browser Record Plugin extension after you roll  back the update.
  

        Alternatively, if you want, you can simply switch browsers  'till this is fixed. And for many of you for whom  FF  disabling the RealPlayer extension does not even work to  allow you to see videos - it didn't for me, and a Level Three  Case Manager I know at RealPlayer said the same thing- obviously it's not the best solution and even if it allows  you to see videos, these geniuses at Firefox have not been  even telling you how to then download videos with RealPlayer  - they've  been too busy following Adobe's "pass the buck and blame  RealPlayer so just disable it" nonsense without telling what  to do next, or that there are other much better choices. RealPlayer is likely not the cause (although there is a conflict in the interaction with the Adobe update.
  

              The Best Choices are:
   First Choice:
  
           Roll Back the Update to the 10.3 version -
  

  See  links below for both Adobe's uninstaller - to first uninstall the 11.3- and for the 10.3  version. Choose the 10.3 that says "for other browsers"- this  is for Firefox. The other one is for IE Active X. IE and has to be reinstalled also because the uninstaller removes both version.
  

  Adobe clean uninstall instructions, step 4, which says to remove the additional files and folders is not usually necessary and you can be denied access to delete all files. RealPlayer also said it is not necessary. I know how to create special permissions but don't mind not because most of the users don't know how to do this - I didn't, even though I am almost certain that one of these Firefox gurus will tell you that I'm wrong. It's good to make the move, only, it can be difficult for many and it does not seem necessary for me or someone else, from what I've heard.

          Note: When you reinstall the 10.3 change the update  setting from automatic to "Never check for updates" to avoid any more problems until this is finally  fixed. Adobe already updated to the 11.3.300.262 for Firefox (which was designed to ONLY fix the crash problems and not the video viewing problems) and didn't even fix that -I don't trust anything Adobe says right now until this is  permanently fixed. And in the future I strongly urge you to  do the same, keeping it on "Notify me if there are updates" in a future version where that choice is available. If you forget, you can change the setting from  the control panel. Click on Large Icons, then Flash Player and on then the   Advanced tab and dot the lower radio button for "Never check....." in the 10.3  If you don't  get notified of a new version you can always check this forum  which you need to do anyway because any new version at this  point is going to be a beta version fix until we test it  thoroughly and I don't care who disagrees with me on that, or  what Firefox says either.
  

  Second choice:

      Change Browsers -
  

  The Adobe problem involves only Firefox. You can watch videos and download them with the RealPlayer download button if you don't want to do the restore. You can even leave the extension off RealPlayer (if that allows to see the videos) and use another browser to download (just copy and paste the URL of the video on the address bar) and the RealPlayer download button will work.

  To uninstall 11.3

     http://forums.adobe.com/message/4041846#4041846
  

  To install 10.3

     http://forums.adobe.com/thread/889580  
  
  Important Note: Remember, you have to reinstall both versions, the one for Firefox and for Internet Explorer  because the uninstaller removes both.
  
        This has worked perfectly for many others I've heard back  from - hope it works for you.
  

• How can I send emails with outlook express from firefox

  How can I send emails with outlook express from firefox

  See change the program used to open e-mail links for how to configure Firefox to use Outlook Express.